• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4068-4074
• /
• 2011

The purpose of this study was to examine the usefulness of MR Breast perfusion image and time-signal intensity curve in patients diagnosed with breast cancer. We selected on 20 patients who were histologically diagnosed to have invasive ductal carcinoma (IDC) from March 2009 to December 2010. First, the Breast perfusion mapping image was reconstructed after obtaining the dynamic contrast enhancement image. The reconstructed image measured the slope, maximal relative enhancement, and time to peak on the detail including the lesion region, normal region, back ground region after obtaining the time-signal intensity curve. The lesion region and normal and slope of the back ground part were measured with the quantitive analytical method about the research and the average was compared and was analyze. In the qualitative analysis, the signal strength of each pixel was analyze with the macroscopic and being high it was low, the medium (2) performed the division of (a) by the three-point standard and the average was measured. The findings from the quantitative image analysis are the following: In the lesion region, the slope and maximal relative enhancement were the highestest among and the time to peak was the highestest in the back ground region. In the qualitative analysis, the breast perfusion image showed a diagnostic efficiency.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.77-87
• /
• 2013

In this paper, we present a novel method for local image descriptor called exact order based descriptor (EOD) which is robust to illumination changes and Gaussian noise. Exact orders of image patch is induced by changing discrete intensity value into k-dimensional continuous vector to resolve the ambiguity of ordering for same intensity pixel value. EOD is generated from overall distribution of exact orders in the patch. The proposed local descriptor is compared with several state-of-the-art descriptors over a number of images. Experimental results show that the proposed method outperforms many state-of-the-art descriptors in the presence of illumination changes, blur and viewpoint change. Also, the proposed method can be used for many computer vision applications such as face recognition, texture recognition and image analysis.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.575-580
• /
• 2010

Eye gaze as a form of input was primarily developed for users who are unable to use usual interaction devices such as keyboard and the mouse; however, with the increasing accuracy in eye gaze detection with decreasing cost of development, it tends to be a practical interaction method for able-bodied users in soon future as well. This paper explores a low-cost, robust, rotation and illumination independent eye gaze system for gaze enhanced user interfaces. We introduce two brand-new algorithms for fast and sub-pixel precise pupil center detection and 2D Eye Gaze estimation by means of deformable template matching methodology. In this paper, we propose a new algorithm based on the deformable angular integral search algorithm based on minimum intensity value to localize eyeball (iris outer boundary) in gray scale eye region images. Basically, it finds the center of the pupil in order to use it in our second proposed algorithm which is about 2D eye gaze tracking. First, we detect the eye regions by means of Intel OpenCV AdaBoost Haar cascade classifiers and assign the approximate size of eyeball depending on the eye region size. Secondly, using DAISMI (Deformable Angular Integral Search by Minimum Intensity) algorithm, pupil center is detected. Then, by using the percentage of black pixels over eyeball circle area, we convert the image into binary (Black and white color) for being used in the next part: DTBGE (Deformable Template based 2D Gaze Estimation) algorithm. Finally, using DTBGE algorithm, initial pupil center coordinates are assigned and DTBGE creates new pupil center coordinates and estimates the final gaze directions and eyeball size. We have performed extensive experiments and achieved very encouraging results. Finally, we discuss the effectiveness of the proposed method through several experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.826-831
• /
• 1988

This paper presents an approach to segment an image into areas of surfaces, and to compute the surface properties from a gray-scale image in order to describe the surfaces for reconstruction of the 3-D shape of the objects. In general, an rigid body has several surfaces and many edges. But if it is not polyhedoron, it is necessary not only to describe the relation between surfaces, i.e. its line drawings but also to represent the surfaces' equations itself. In order to compute the surfaces' equation we use a probability of edge distribution. At first it is extracted edges from a gray-level image as much as possible. These are not only the points that maximize the change of an image intensuty but candidates which can be seemed to be edges. Next, other character of a surface (color, coordinates and image intensity) are extracted. In our study, we call the all feature of a surface as "texture", for example color, intensity level, orientation of an edge, shape of a surface and so on. These features of a surface on a pixel of an image plane are mapped to a point of the feature space, and segmented to each groups by cluster analysis on this space. These groups are considered to represent object surface in an image plane. Finally, the states of object surface in 3-D space are computed from distributional probability of local and overall statistical features of a surface, and from shape of a surface.a surface.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.89-101
• /
• 1999

This paper represents methods to calculate heights of buildings by estimating their shadow lengths in a single and panchromatic image of the KVR-1000 camera system Shadows are identified Com brightness intensity of each pixel, and their lengths are measured. Two methods are implemented to estimate heights from shadows. One method is to use a ratio of shadow s lengths with respect to heights of reference buildings measured on site. The other method uses sun elevation angles calculated from various camera s parameters at the exposure time. The estimated heights of 20 buildings are compared with heights measured on site, and the RMS errors for each method are 1.70m and 1.75m, respectively. When a resampling method to enhance identification of shadows is used and their lengths are accordingly re-calculated, the estimated errors for each method are significantly reduced to 1.17m and 1.16m, respectively. Meanwhile, effects of land slope on shadows can be hardly obtained unless detailed DTM(digital terrain model) are available, and they introduce additional errors up to 25m.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.463-467
• /
• 2004

Rosette-type diffusers with four-ports per riser are constructed in relatively shallow water in Korea. However, the trajectorial bending phenomena due to lower-pressure inside the surrounded buoyant jets on the riser was not considered in most models and was not observed without any experimental results. The buoyant jet behavior affected by the bending effect where there have been growing interests need to be verified experimentally and need to be preceded in the analysis of the characteristics of the buoyant jets oil a riser. The hydraulic model experiments have been carried out to investigate the characteristics of the behavior of horizontal buoyant jets discharged from a Rosette-type riser with four ports as well as single port over a certain range of the experimental conditions including initial momentum and initial buoyancy using LIF (Laser Induced Fluorescence) system to obtain concentration fields. The intensity of the fluorescent light in each pixel on the images obtained from LIF system with the tracer of Rhodamine H was converted to the local dye concentration with a set of calibration procedures to account for the non-uniform distribution of light intensity and the attenuation of light energy by water medium. The experimental results shows that the trajectories from Your ports tend to bend more and more to the inner side with the increase of the densimetric Froude number while the buoyant jet from a single port rises up without any bending phenomena. The previous models, VISJET and Seo et al. (2002), do not simulate the trajectories well except the region before the bending section. This study will focus on the analysis of the behavior of the buoyant jets for mainly a Rosette-type riser by conducting hydraulic model experiments using LIF system.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.55-61
• /
• 2013

TSexual violence is physical and mental violence that violates the sexual self-determination contrary to the intention of the other party such as rape, forced molestation, sexual harassment, caught hidden camera. It is one of the many criminal acts that male is perpetrators and female is victims. Sexual harassment, one of the sexual violence is forced sexual harassment. It is considered a color frame where each pixel has 3 color components such that RGB. The averaging the absolute difference between the current frame and te next frame is divided by the absolute difference between the current frame and the previous frame. If there was a difference between the frame pair before a scene change the discontinuity value indicating a scene change could be relatively small. Therefore, Thus, the use of the redefined equation and redefined algorithm can be seen as it is much more good via experiment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.457-458
• /
• 2002

The fractal dimension is the characteristics that can quantitatively define the irregularity in natural. It is useful in describing the morphology or various rubbed surface for hydraulic piston motor instead of the stylus profiling method. But fractal parameters had not constructed on the morphological characteristic or rubbed surface because of the insufficient knowledge about a conception of fractal dimension. In this study, for the purpose or applying fractal I parameters practically, we have suggested way to establish the morphological characteristic of rubbed surface with fractal parameters, and we carried out an experiment on the lubricant friction and wear by using Ball-ON-Disk type tester. Materials were the brass and the bronze which are used to slipper-pad in the hydraulic piston motor. We searched for fractal parameters or surface structure with the digital image processing, Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Using the image processing and fractal parameters for rubbed surface in the friction and wear test, morphology of rubbed sur race can be effectively obtained by fractal dimensions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1048-1052
• /
• 2004

In this work, we have investigated a role of linking parameter in Pulse-Coupled Neural Network(PCNN) which is suggested to explain the synchronous activities among neurons in the cat cortex. Then we have found a method to determine the linking parameter for a satisfactory face detection performance in a given color image. Face detection algorithm which uses the color information is independent on pose, size and obstruction of a face. But the use of color information encounters some problems arising from skin-tone color in the background, intensity variation within faces, and presence of random noise and so on. Depending on these conditions, PCNN's linking parameters should be selected an appropriate values. First we obtained the mean and variance of the skin-tone colors by experiments. Then, we introduced a preprocess that the pixel with a mean value of skin-tone colors has the highest level value (255) and the other pixels have values between 0 and 255 according to normal distribution with a variance. This preprocessing leads to an easy decision of the linking parameter of the Pulse-Coupled Neural Network. Through experiments, it is verified that the proposed method can improve the face detection performance compared to the existing methods.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.2
• /
• pp.73-83
• /
• 2015

This paper proposes a TFT-LCD defect blob detection algorithm using the sequential defect detection method. First, for every pixel, a defect possibility is determined by the intensity difference and the defect candidates are detected according to the sequential defect detection method. For detected candidate pixels, the defect probability that indicates a potential included in the defect according to the each step. By applying the morphological operation, blobs are comprised of the detected candidates and the defect blobs are detected using the defect possibility of blobs. The validity of the proposed method was demonstrated a simulated image and also then it was tested a real TFT-LCD image. By the experimental results, the proposed method is very effective in TFT-LCD detect detection.