• Title/Summary/Keyword: pitch-over

Search Result 258, Processing Time 0.022 seconds

Micropositioning of a Linear Motion Table with Magnetic Bearing Suspension (자기 베어링으로 지지 되는 직선운동 테이블의 초정밀 위치제어에 관한 연구)

  • 김의석;안형준;장인배;한동철
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.466-469
    • /
    • 1995
  • This paper presents a design and performance of the 6 D.O.F linear motion table with a magnetic bearing suspension. The linear positioning of the table with a 150mm stroke is driven by a brushless DC Linear motor and the other attitudes of the stage are controlled by the analog PD controller with magnetic bearing actuators. Each magnetic bearing unit which consists of 3 electromagnets, 3 capacitance probes and 3 backup bearings affords controlled forces by detecting the air gap between the probes and guideways. An integral type capacitance probe amplifier is equipped on the upper plate of the table so that the probe line to the probe amplifier can be shorter therefore the problems due to the stray capacitance and noise can be reduced. Form the pitch-yaw errormeasured by the autocollimator, the vertical and horizont straightness errors of the table are derived that they are maintained below 1.mu. m over 100mm stroke. The positioning accuracy of the linear motion is maintained below 2 .mu. m and the repeatability error is below 1 .mu. m

  • PDF

Pre-Infection Behavior of the Pitch Canker Fungus Fusarium circinatum on Pine Stems

  • Thoungchaleun, Vilakon;Kim, Ki-Woo;Lee, Don-Koo;Kim, Chang-Soo;Park, Eun-Woo
    • The Plant Pathology Journal
    • /
    • v.24 no.2
    • /
    • pp.112-117
    • /
    • 2008
  • Pre-infection behavior of Fusarium circinatum on stems of pine species was investigated with scanning electron microscopy. Two-year-old stems of Pinus densiflora and p. rigida were inoculated with the fungal conidial suspension and subjected to $25^{\circ}C$ for up to 16 hr. Most microconidia germinated 12 hr after inoculation on pine stems. Conidia produced germ tubes from either one or both ends of microconidia. Germ tubes grew over the stem surface and appeared to enter host tissues through natural openings on pine stems. Surface cracks in the cork were entrance sites of germ tubes of F. circinatum. In addition, host cell wall cracks were often found at the tip of germ tubes. The cuticle appeared to be eroded either at the tip of germ tubes or around germlings. Germ tubes also produced appressoria-like structures, exhibiting swollen tips of germ tubes on the stem surface. There seems to be no significant differences in the pre-infection behavior of F. circinatum on stems between the two pine species.

Evaluation of Natural Decay Durability on Valuable Domestic Softwoods by European Standard Test Method (유럽규격 시험방법에 의한 국산 유용 침엽수재의 천연 내후성 평가)

  • Lee, Jong-Shin;Kim, Young-Sook;Kim, Gyu-Hyeok;Kim, Kyung-Tae;Kim, Yoon-Hee
    • Journal of the Korea Furniture Society
    • /
    • v.26 no.3
    • /
    • pp.222-228
    • /
    • 2015
  • To evaluate the natural decay durability of valuable domestic softwoods which are used for preservative treatment in our country, we carried out decay test by European standard method. Of all test wood species, Japanese larch (Larix leptolepis) showed slightly high natural decay durability compared to other 4 wood species, Japanese red pine (Pinus densiflora), pitch pine (Pinus rigida), Japanese cedar (Cryptomeria japonica), and scots pine (Pinus sylvestris). However, all of evaluated domestic softwood species in this study caused high weight losses over about 30% in heartwood by test fungus, Poria placenta. We can hardly expect a good natural decay durability from these softwood species. According to the classification of the natural durability of European standard (EN 350-1), they are classified into "Not durable" or "Slightly durable". Therefore, if using these softwoods as exterior materials, we must do preservative treatment to ensure durability.

Casting Lowered-ADCP and Data Processing Methods for Configuring Vertical Current Structure (해류 수직구조를 파악하기 위한 LADCP Casting 및 자료처리 방법)

  • Kim, Eung;Jeon, Dong-Chull;Shin, Chang-Woong;Kim, Dong-Guk
    • Ocean and Polar Research
    • /
    • v.33 no.spc3
    • /
    • pp.397-407
    • /
    • 2011
  • To understand the vertical structure of ocean currents from raw data observed by lowered-ADCP (LADCP), these data require post-processing. Data were processed using Krahman's version 10.8 processing software based on Matlab. It is estimated the influence of auxiliary data affecting the processed current structure. The bottom-tracked velocities and the GPS information significantly contribute the offset on reference velocities in the bottom layer and barotropic ones in the middle layer, respectively. Good quality data can be obtained when LADCP is least tilted in pitch and roll during observation. In situ application of LADCP to the (northward) volume transports of Kuroshio in the East China Sea proved to be 24.8. Sv (= $1{\times}10^6m^3s^{-1}$) in October 2007, and 28.2 Sv in June 2008, respectively. The volume transport is relatively large over the continental slope when compared to the shelf or the deep sea.

Aerodynamic forces on fixed and rotating plates

  • Martinez-Vazquez, P.;Baker, C.J.;Sterling, M.;Quinn, A.;Richards, P.J.
    • Wind and Structures
    • /
    • v.13 no.2
    • /
    • pp.127-144
    • /
    • 2010
  • Pressure measurements on static and autorotating flat plates have been recently reported by Lin et al. (2006), Holmes, et al. (2006), and Richards, et al. (2008), amongst others. In general, the variation of the normal force with respect to the angle of attack appears to stall in the mid attack angle range with a large scale separation in the wake. To date however, no surface pressures have been measured on auto-rotating plates that are typical of a certain class of debris. This paper presents the results of an experiment to measure the aerodynamic forces on a flat plate held stationary at different angles to the flow and allowing the plate to auto-rotate. The forces were determined through the measurement of differential pressures on either side of the plate with internally mounted pressure transducers and data logging systems. Results are presented for surface pressure distributions and overall integrated forces and moments on the plates in coefficient form. Computed static force coefficients show the stall effect at the mid range angle of attack and some variation for different Reynolds numbers. Normal forces determined from autorotational experiments are higher than the static values at most pitch angles over a cycle. The resulting moment coefficient does not compare well with current analytical formulations which suggest the existence of a flow mechanism that cannot be completely described through static tests.

Objective and Subjective Voice Examination in Korean Medicine

  • Yu, Junsang
    • Journal of Pharmacopuncture
    • /
    • v.17 no.3
    • /
    • pp.57-61
    • /
    • 2014
  • Objectives: When a person speaks, voice problems usually include pain or discomfort and/or difficulties in terms of the pitch, the loudness and the quality of the voice. When patients with voice problems induced by stroke, Parkinson's disease, and systemic diseases involving the voice are examined, generally, of the Four Diagnoses (四診), a Diagnosis of Hearing can be used in current Korean medicine. The effects of acupuncture and herb medicine on voice problems have been reported for over 20 years. However, when it comes to improvements, objective and subjective evaluation methods need to be explained. Methods: Subjective methods for evaluating voice were studied through a literature search of old medicinal books containing Korean medicine diagnostics, and an objective evaluation method using Praat software is presented. Results: Korean medicine doctors analyze the patient's voice in clinical settings unconsciously on a daily basis. However, most voice diagnoses depend on the doctor's subjective evaluation. Voice qualities can be evaluated by using the Eight Principles (八綱), including Yin-Yang; the Five Elements (Phases); the Grade, Roughness, Breathy, Asthenic, Strained (GRBAS) score, and the Visual Analogue Scale (VAS) as subjective methods, and an acoustic analysis using the Praat program can be used as an objective method. Conclusion: A more complete voice examination can be achieved by using subjective and objective methods at the same time. For an objective explanation and management of patient's voice problems or systemic disorders, an objective method should be used in Korean medicine, which already has many subjective diagnostic methods. More research needs to be conducted, and more clinical evidence needs to be collected in the future.

A Study on Timbre Analysis of Pyunjong (편종의 음색 분석 연구)

  • Cho, Hee-Young;Kim, Jun
    • Journal of Korea Multimedia Society
    • /
    • v.14 no.11
    • /
    • pp.1507-1515
    • /
    • 2011
  • As the first step in research for sound synthesis of Pyungjong, timbre was analyzed by FFT analysis. There was no significant difference in the pitch of scale between modern Pyungjong and western twelve-tone equal temperament scale. The timbre of Pyunjong chagnes over time. When striking Pyunjong, the noises to be generated across all frequencies will disappear in a short period of time, and a unique partial only is left. Then it disappear from the partial of high frequency components in order, and two partials remain at release time. At this time, the beating is occurring by the frequency of the remaining partial. Pyungjong used in this study is relatively a recently manufactured Pyungjong, and for original sound synthesis of Pyungjong, a study of ancient Pyungjong's timbre should be additionally conducted later.

Structural Performance of Finger-Jointed Lumber with Different Joint Configurations

  • Lee, Sang-Joon;Eom, Chang-Deuk;Kim, Kwang-Mo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.39 no.2
    • /
    • pp.172-178
    • /
    • 2011
  • Three different finger-jointed lumbers which have different geometric features and adhesives were manufactured and studied in this study. Larch and pitch pine lumbers with and without preservative treatment were used. Bending MOE was measured as the preliminary investigation for grouping the specimen. After the finger, bending MOE of two wood species without preservative treatment shows over 97% property of the control group. The tensile modulus also shows almost same property after the finger joint. And it is found out that the preservative treatment induce little effect on bending and tensile MOE. Based on this result, high performance of examined finger-jointed lumber can be found out. However, tensile strength decreased around 20% which would be induced by the crack along the root of the finger which is formed near the edge during manufacturing stage. And finger-jointed lumber with preservative treatment even shows higher decrement of the tensile strength with higher wooden part failure mode.

Spectral Characteristics and Formant Bandwidths of English Vowels by American Males with Different Speaking Styles (발화방식에 따른 미국인 남성 영어모음의 스펙트럼 특성과 포먼트 대역)

  • Yang, Byunggon
    • Phonetics and Speech Sciences
    • /
    • v.6 no.4
    • /
    • pp.91-99
    • /
    • 2014
  • Speaking styles tend to have an influence on spectral characteristics of produced speech. There are not many studies on the spectral characteristics of speech because of complicated processing of too much spectral data. The purpose of this study was to examine spectral characteristics and formant bandwidths of English vowels produced by nine American males with different speaking styles: clear or conversational styles; high- or low-pitched voices. Praat was used to collect pitch-corrected long-term averaged spectra and bandwidths of the first two formants of eleven vowels in the speaking styles. Results showed that the spectral characteristics of the vowels varied systematically according to the speaking styles. The clear speech showed higher spectral energy of the vowels than that of the conversational speech while the high-pitched voice did the same over the low-pitched voice. In addition, front and back vowel groups showed different spectral characteristics. Secondly, there was no statistically significant difference between B1 and B2 in the speaking styles. B1 was generally lower than B2 when reflecting the source spectrum and radiation effect. However, there was a statistically significant difference in B2 between the front and back vowel groups. The author concluded that spectral characteristics reflect speaking styles systematically while bandwidths measured at a few formant frequency points do not reveal style differences properly. Further studies would be desirable to examine how people would evaluate different sets of synthetic vowels with spectral characteristics or with bandwidths modified.

Liquid Crystal Mixtures of High Response Time and High $T_{NI}$ for LCD-TV Application

  • Ban, Byeong-Seob;Kim, Bong-Hee;Seo, Bong-Sung;Yun, Yong-Kuk;Sakong, Dong-Sik;Chung, Kyu-Ha;Kim, Yong-Bae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2002.08a
    • /
    • pp.498-499
    • /
    • 2002
  • In In order to develop liquid crystal mixtures of high response time and high nematic-isotropic transition temperature ($T_{NI}$) for LCD-TV application, novel liquid crystal molecules with a fluoro-isothiocyanate moiety were synthesized. They showed remarkably high $T_{NI}$ over 200 $^{\circ}C$, wide mesophase range of 170 $^{\circ}C$, high dielectric anisotropy of 14 and high optical anisotropy of 0.19. New LC Mixtures of the high $T_{NI}$ ($85{\sim}100 ^{\circ}C$) and fast response time ($8{\sim}10ms$) were blended with the novel fluoro-isothiocyanate containing LC molecules, phenylcyclohexanes, bicyclohexanes and ester compounds. It was also studied on optimum pitch of liquid crystal for high speed twisted nematic LCD-TV applicaton. The LC mixtures show a fast speed of the below one frame rate in real 17" TV panel.

  • PDF