• Imaging Science in Dentistry
• /
• 제40권1호
• /
• pp.15-23
• /
• 2010

Purpose : This study was designed to compare the effective doses from low-dose and standard-dose multi-detector CT (MDCT) scanning protocols and evaluate the image quality and the spatial resolution of the low-dose MDCT protocols for clinical use. Materials and Methods : 6-channel MDCT scanner (Siemens Medical System, Forschheim, Germany), was used for this study. Protocol of the standard-dose MDCT for the orthodontic analysis was 130 kV, 35 mAs, 1.25 mm slice width, 0.8 pitch. Those of the low-dose MDCT for orthodontic analysis and orthodontic surgery were 110 kV, 30 mAs, 1.25 mm slice width, 0.85 pitch and 110 kV, 45 mAs, 2.5 mm slice width, 0.85 pitch. Thermoluminescent dosimeters (TLDs) were placed at 31 sites throughout the levels of adult female ART head and neck phantom. Effective doses were calculated according to ICRP 1990 and 2007 recommendations. A formalin-fixed cadaver and AAPM CT performance phantom were scanned for the evaluation of subjective image quality and spatial resolution. Results : Effective doses in ${\mu}Sv$ ($E_{2007}$) were 699.1, 429.4 and 603.1 for standard-dose CT of orthodontic treatment, low-dose CT of orthodontic analysis, and low-dose CT of orthodontic surgery, respectively. The image quality from the low-dose protocol were not worse than those from the standard-dose protocol. The spatial resolutions of both standard-dose and low-dose CT images were acceptable. Conclusion : From the above results, it can be concluded that the low-dose MDCT protocol is preferable in obtaining CT images for orthodontic analysis and orthodontic surgery.

• 공업화학
• /
• 제30권3호
• /
• pp.331-336
• /
• 2019

본 연구에서는 리튬이차전지의 초기 효율과 율속 특성의 향상을 위해 피치계 소프트 카본 음극재의 요구 물성 및 제조 공정변수에 대한 실험을 진행하였다. 피치는 석유계 잔사유를 사용하여 공정 온도를 변수로 합성하였다. 공정온도를 각각 360, 370, $410^{\circ}C$에서 3 h 진행하여, 86, 98, $152^{\circ}C$의 연화점을 갖는 피치를 제조하였다. 피치의 원소분석과 열적 특성을 EA 분석과 TGA 분석을 통해 고찰한 결과, 높은 연화점을 갖는 경우 낮은 H/C 및 발달된 열적안정성을 관찰할 수 있었다. 얻어진 피치를 $1,200^{\circ}C$에서 1 h 동안 탄화 열처리 공정을 진행하여 소프트 카본계 음극재를 제조하였다. XRD 분석을 통해 결정 구조를 고찰한 결과, 연화점이 높은 피치에서 제조된 소프트 카본은 상대적으로 고비점의 성분들로 구성되어 탄화 열처리공정 시 증발 성분의 감소 및 고리화에 참여하는 성분들의 증가로 인하여 결정성이 증가하였음을 고찰할 수 있었다. 결정성이 향상된 소프트 카본계 음극재에서 향상된 초기 효율과 율속 특성의 결과를 얻을 수 있었다. 향상된 초기 효율 및 율속 특성은 소프트 카본계 음극재의 발달된 결정 구조에서 기인하는 메커니즘에 대하여 논의하였다.

• 공업화학
• /
• 제33권5호
• /
• pp.459-465
• /
• 2022

천연 흑연의 전기화학적 특성 향상을 목적으로 피치 코팅을 실시하였다. 최적 코팅용 피치의 합성조건을 알아보기 위해 다양한 온도에서 합성된 피치를 코팅하여 음극 특성을 알아보았다. 합성온도가 증가할수록 연화점, 잔탄율이 증가하며 열적 안정성이 높아졌으나, 430 ℃에서는 과한 축합반응으로 NI (NMP Insoluble)가 다량 합성되었다. 높은 열적 안정성으로 표면의 균일도와 코팅 두께가 증가함에 따라 제조된 음극재의 향상된 초기쿨롱효율과 출력특성의 결과를 얻을 수 있었다. 하지만 과한 NI가 함유된 피치로 코팅한 음극재는 코팅이 실시되지 않은 흑연보다 저하된 전기화학 특성을 나타냈다. NI는 분산성이 낮고 열처리 후 구체 형성의 영향으로 불균일한 SEI층 형성에 기인한다는 결과를 얻을 수 있었다. 피치 합성온도를 제어하여 균일한 표면과 적절한 코팅층 형성이 이루어지는 최적 조건을 도출하였다.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.213-221
• /
• 2010

The number of North Korean refugees entering South Korea is continuously increasing. North Korean speakers show significant differences in vowel and consonant phonetics, length of vowels, and the rhythm and intonation of sentences. The object of this research was to examine the effectiveness of a speech intervention program for North Korean refugees using visual feedback through acoustical analysis for intonation. The subjects were three adults with no speech disabilities who had been in South Korea for less than five years. They had not received any prior treatment for inflection change. The program was set in a discourse situation and used Praat to evaluate intonation and provide visual feedback as demonstrating proper intonation changes through pitch contour. The results after intervention are as follows. First, intonation was significantly improved according to a 5-point subjective evaluation scale. Second, the pitch contour was similar to the contour of standard South Korean pronunciation. The subjects were very satisfied with this initial treatment and showed a high level of motivation. In subsequent study, the development of intervention and the comparison of interventions will be needed as well.

• 공업화학
• /
• 제22권5호
• /
• pp.495-500
• /
• 2011

나프타 분해 공정에서 필수적으로 발생되는 분해연료유(PFO, pyrolyzed fuel oil)에서 나프탈렌을 재결정해내고 남는 PFO 잔유물을 이용하여 $300{\sim}800^{\circ}C$에서 질소 조건에서 탄소구조체를 합성하여 보았다. PFO를 헥산이나 메탄올로 처리 후 얻은 탄소물질 프리커서를 열처리하면 $350^{\circ}C$에서는 수 십 ${\mu}m$ 크기의 flake 상의 탄소체가 만들어졌으나, $400^{\circ}C$ 이상에서는 수 ${\mu}m$로 크기가 줄며 공 모양의 탄소구조체로 변형되었다. BET와 XRD 스펙트럼에 따르면 공모양으로 합성된 메조상 탄소체는 큐빅상으로 미세 기공인 mesopore가 아직 잘 발달되지 많은 부정형 탄소임을 알려주고있다.

• 소성∙가공
• /
• 제24권4호
• /
• pp.272-279
• /
• 2015

The characteristics of the laser metal deposition parameters were studied to enhance the deposition efficiency using a diode pumped disk laser. STD61 hot tool steel plate and Fe based AISI M2 alloy were used as a substrate and powder for the laser metal deposition, respectively. Among the laser metal deposition parameters the laser power, track pitch and powder feed rate were used to estimate the deposition efficiency. From the experimental results, the deposition efficiency was shown to be excellent when 1.8kW laser power 500um track pitch and 10g/min of the powder feed rate were used. For this optimal condition the average hardness of the deposition track was approximately 830HV, and this value is 30~50% better than the hardness of the commercially produced tool steel after heat treatment.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.396-402
• /
• 1992

Carbon solid was prepared from dormant mesophase pitch (DMPP) without using a binder and its properties were characterized. DMPP powder was stabilized with air or nitric acid in pretreatment stage so that it might not soften in later heat ttreatment stage. Optimum sintering properties were obtained from carbon powder with 2.36∼2.38 of C/H atomic ratio and 1.27∼1.40 of C/O atomic ration in air stabilization. In nitric acid stabilization, optimum sintering properties were obtained when 20∼40 vol.% of nitric acid solution was used. Compressive strength increased up to 1200$^{\circ}C$ of heat treatment temperature, and the highest compressive strength and bulk density of carbon solid from DMPP were 3000 kgf/㎤, respectively. The optical properties of carbon solid obtained was fine mosaic structure. Carbon solid after graphitization showed the properties of hard carbon due to stabilization and its shore hardness was 120.

• Carbon letters
• /
• 제3권2호
• /
• pp.80-84
• /
• 2002

The surface treatment of C-type isotropic pitch-based carbon fiber was carried out by anodic oxidation in 5 wt% $NH_4NO_3$ electrolyte. The changes of fiber surface and carbon fiber/ABS resin composites were characterized by SEM, XPS and mechanical properties test. The oxygen functional groups on the surface, such as hydroxyl (-C-OH), carboxyl (-COOH) groups etc., increased after oxidation. Tensile strength, flexural strength and modulus of carbon fiber/ABS composites were also enhanced. However, the impact strength decreased with the improvement of the surface adhesion between CF and matrix.

• 공업화학
• /
• 제7권1호
• /
• pp.1-8
• /
• 1996

자동차 엔진용 thermostat에서 냉각수 온도제어를 위해 사용되는 wax의 제조 및 성분 분석을 실시하였다. 제조된 시료에 대해 lift 실험을 실시해 본 결과, 용제 추출법에 의해 제조된 시료가 자동차 엔진용 thermostat으로 사용 가능한 범위내에 있게 됨을 볼 수 있었다. 또한, 원유의 pitch를 용제 추출한 후 감압 증류 및 산처리를 하면 보다 정밀한 wax를 제조 할 수 있음을 알 수 있었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.39-46
• /
• 2000

In pulp and papermaking process, enzymatic treatment of pulp fibres has been a topic of increasing interest in last decade. Lots of patents, papers and research reports were published on the application of enzymes in the fields of enzymatic bleaching, deinking, slime control, pitch control, waste water treatment and fibre modification. Cellulase and hemicellulase are the principal enzymes used for the modification of fibre property. This study was carried out for determinating the behaviors of enzyme to pulp fibres. A commercial enzyme, Denimax BT which is consisted with cellulase and hemicellulase, was treated to the kraft pulp produced from domestic hardwood mixtures. Results were mainly concentrated on the behaviors of freeness, drainability and fines content of fibres, and physical properties of paper with enzyme treatment. The freeness levels and dewatering ability were developed, and the fines contents were decreased. The creation of fines were controlled by the method of pre-enzyme treatment prior to fibre beating. The mechanical strength of paper, like tensile, burst, tear strength and folding endurance, were remarkably improved by the pre-enzyme treatment.