• 한국재료학회지
• /
• 제2권1호
• /
• pp.76-82
• /
• 1992

$TEOS-O_3$ 산화막은 깔개층 물질에 따라 증착속도가 변하는 특성을 나타낸다. 본 논문에서는 $TEOS-O_3$ 산화막의 깔개층 물질 의존성 이외에도 배선 밀도, 배선 간격에 따라 증착속도가 달라지는 패턴 의존성에 대하여 조사하였다. 또한 $TEOS-O_3$ 산화막의 깔개층 물질 의존성 및 패턴 의존성을 줄이기 위해 다층 배선에서 1차 배선후에 깔개층, 즉 TEOS-base 프라즈마 산화막 및 $SiH_4-base$ 프라즈마 산화막을 증착했을 때 $TEOS-O_3$ 산화막의 증착 특성을 조사하였다. 그리고 그 깔개층 물질에 $N_2$ 프라즈마 처리를 했을 때 $TEOS-O_3$ 산화막의 증착 특성에 대해 조사하였다. 그 결과 $TEOS-O_3$ 산화막에서 기판 위에 배선 밀도와 배선 간격에 따른 의존성은 깔개층물질이 $SiH_4-base$ 일때보다 TEOS-base 프라즈마 산화막인 경우 $N_2$ 프라즈마 처리를 하면 깔개층 물질 표면이 O-Si-N화 되므로써 의존성이 사라지게 된다.

• 대한족부족관절학회지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2011

Purpose: The purpose of this study was to compare the clinical and radiological results of single and double fusions in the transverse tarsal joint. Materials and Methods: Between December 2000 and April 2009, 16 patients (16 feet) who had been treated by fusion of transverse tarsal joint were included in this study. In 8 patients, only talonavicular joint was fused and in the other 8 patients, both talonavicular and calcaneocuboid joints were fused simultaneously. We have measured talo-first metatarsal angle, calcaneal pitch angle, talonavicular coverage angle and presence of adjacent joint arthritis for radiological assessment at both preoperative and last visit. Furthermore, we have evaluated Visual Analogue Scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS) score and patient's satisfaction. Results: In a single fusion group, VAS was improved from $6.4{\pm}1.4$ to $0.8{\pm}1.0$ (p=0.0011) and AOFAS score was improved from $63.8{\pm}6.2$ to $89.4{\pm}9.8$ (p=0.0012). In a double fusion group, VAS was improved from $8.0{\pm}0.75$ to $2.0{\pm}1.8$ (p=0.0011) and AOFAS score was improved from $60.5{\pm}11.2$ to $89.5{\pm}6.0$ (p=0.0012). In the difference of talo-first metatarsal angle between two groups, a single fused group was more improved than a double fused group (p=0.04). Conclusion: Both single and double fusions are useful and attractive treatment for the transverse tarsal joint arthritis. Furthermore, a single fusion has advantages of less invasiveness and preserving some degree of hindfoot motion and could be an effective alternative to a double fusion if patient meets appropriate criteria through careful preoperative evaluation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.412-412
• /
• 2008

ENIG(Electroless Nickel Immersion Gold)is a surface treatment method that is used most widely at fine pitch's SMT and BGA packaging process. ENIG has good diffusion barrier of Ni against solder and good wettability due to Au finish. But when the discoloration occurred on the Au finish of ENIG, some key characteristics related to the quality and reliability of PCB such as bondability, solderability and electrical flowing of packaging process could be deteriorated. In this paper, we have performed the water dip test ($88^{\circ}C$ purified water) which accelerates the galvanic corrosion of Ni diffused from the Ni-P layer. That is, the excessive oxidation of the Ni layer could result in non-wetting of the solder because the flux may not be able to remove excessive oxides. Though Au discoloration have been reported to be caused by Ni oxides in many literature, it is still open to verify and discuss The microstructures and chemical compositions have been investigated using FE-SEM, TEM, FIB, EDS and XPS. As a result, authors have found that the Au discoloration in ENIG type is severely caused by the oxidation of the Ni and the mechanism of Au discoloration can be confirmed through the experiment result of water dip test.

• 대한족부족관절학회지
• /
• 제17권2호
• /
• pp.115-120
• /
• 2013

Purpose: Calcaneal lengthening osteotomy is one option for the treatment of symptomatic flexible flatfoot in adults. The aim of the study was to evaluate the short term clinical and radiologic results and analyze its complications. Materials and Methods: Twelve feet who had undergone calcaneal lengthening osteotomy without flexor digitorum longus transfer between December 2009 and July 2011 were included. The mean age was 40.6 years (23~75 years). The mean followup was 17.3 months (13~25 months). Clinical outcome were assessed using American Orthopadics Foot ans Ankle Society (AOFAS) score and visual analogue scale (VAS) for pain. Four radiologic parameters were measured from weightbearing radiographs to evaluate the difference between preoperatively and postoperatively measures. To analyze the complications, calcaneocuboid joint subluxation and degenerative change were measured postoperatively. Results: The mean AOFAS score improved from 55.3 points preoperatively to 82.2 points at lastest follow-up (p=0.000). The mean VAS improved from 6.3 points preoperatively to 3.2 points postoperatively (p=0.002).All radiologic parameters, the mean talonavicular coverage angle on AP view, the mean talo-1st metatarsal angle on AP and lateral view and the mean calcaneal pitch angle, significantly improved after calcaneal lengthening osteotomy. Nine feets (75%) were shown the degenerative change in the calcaneocuboid joint at latest follow-up radiographs. Conclusion: Calcaneal lengthening osteotomy for the symptomatic flexible flatfoot in adults produced significant improvement in clinical and radiologic parameters, but calcaneocuboid joint osteoarthritis occurred postoperatively remained a major problem.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.81-81
• /
• 2010

전자 패키징은 미세화, 경량화, 저가화를 지향하고 신뢰성의 향상을 위해 발전해 왔다. 이러한 경향은 전자부품 자체의 성능 향상 뿐 아니라 전자부품을 장착, 고정할 수 있게 하는 인쇄회로 기판(PCB : Printed Circuit Board)의 성능에 많은 관심을 가지게 되었다. 전기적 신호의 손실을 줄이기 위해 전기, 전자 산업체에서는 가볍고 굴곡성이 우수한 연성인쇄회로기판(FPCB : Flexible PCB)과 가격이 싸고 신뢰성이 입증된 경성인쇄회로기판(RPCB : Rigid PCB)이 그 대상이다. 본 논문에서는 이 PCB중에서도 RPCB와 FPCB간의 열압착 방식으로 접합 시 전극간의 접합 양상을 보았다. 이 열압착 방식은 기존에 PCB를 접합하는데 사용하고 있는 connector를 이용한 체결법을 대체하는 기술로써 솔더를 중간층(interlayer)로 이용하여 열과 압력으로 접합하는 방식이다. 이 방식을 connector를 사용하는 방식에 비해 그 부피가 작고 I/O개수에 크게 영향 받지 않으며 자동화 공정이 쉬운 장점을 가지고 있다. 접합의 대상 중 RPCB의 경우는 무전해 니켈 금도금(ENIG : Electroless Nickle Immersion Gold)로 제작하였으며 FPCB의 경우는 ENIG와 유기보호피막(OSP : Organic solderability preservation) 처리하였다. 실험에 사용한 PCB는 $300\;{\mu}m$ pitch의 미세피치이며 솔더의 조성은 Sn-3.0Ag-0.5Cu (in wt%)과 Sn-3.0Ag (in wt%)를 사용하였다. 접합 온도와 접합 시간 그리고 접합 압력에 따라 최적의 접합 조건을 도출하였다. 접합 강도는 $90^{\circ}$ Peel Test를 통해서 측정하였으며 접합면 및 파괴면은 SEM과 EDS를 통하여 분석하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• 대한후두음성언어의학회지
• /
• 제16권2호
• /
• pp.140-145
• /
• 2005

Background and Objectives : Voice perturbation measures, such as jitter and shimmer has been importantly used for diagnosis and treatment efficacy of laryngeal dysfunction. This study was conducted to investigate validity of newly developed multi-channel voice analyzer program by comparing with MDVP, PRAAT, TF32. In addition, we compared the voice perturbation measures with different voice analyzer program by type of signals. Materials and Methods : Nineteen mild-severe dysphonic patients participated in our study. Fundamental frequency, jitter and shimmer values were obtained from different voice analyzer program using the same sustained/ah/phonation. Results : Fundamental frequency and shimmer were highly correlated whereas jitter was weakly correlated between newly developed multi-channel voice analyzer program and the others though different pitch computation algorithm except MDVP, In addition, Type 2 and 3 signals were weakly correlated than Type 1. Conclusion : In the clinical setting, clinician may have sufficient information of voice analyzer and control conditions properly for severity of pathologic voice before voice perturbation measure to obtain reliable results.

• 대한조선학회논문집
• /
• 제53권5호
• /
• pp.343-352
• /
• 2016

In this study, a pre-swirl duct for the 180,000 DWT bulk carrier has been designed from a propulsion standpoint using CFD. The stern duct - designed by NMRI - was selected as the initial duct. The objective function is to minimize the value of delivered power in model scale. Design variables of the duct include duct angle, diameter, chord length, and vertical and horizontal displacements from the center. Design variables of the stators are blade number, arrangement angle, chord length, and pitch angle. A parametric design was carried out with the objective function obtained using CFD. Reynolds averaged Navier-Stokes equations have been solved; and the Reynolds stress model applied for the turbulent closure. A double body model is used for the treatment of free-surface. MRF and sliding mesh models have been applied to simulate the actuating propeller. A self-propulsion point has been obtained from the results of towing and self-propelled computations, i.e., form factor obtained from towing computation and towing forces obtained from self-propelled computations of two propeller rotating speeds. The reduction rate of the delivered power of the improved stern duct is 2.9%, whereas that of the initial stern duct is 1.3%. The pre-swirl duct with one inner stator in upper starboard and three outer stators in portside has been designed. The delivered power due to the designed pre-swirl duct is reduced by 5.8%.

• 대한족부족관절학회지
• /
• 제24권3호
• /
• pp.113-119
• /
• 2020

Purpose: A flatfoot that fails to form a longitudinal foot arch is a common lower limb deformity in children. This study evaluated the structural and functional effects of the insole for pediatric flexible flat foot (PFFF). Materials and Methods: Twenty-nine PFFF patients (20 boys and 9 girls, 58 feet) with bilateral symptomatic flatfoot deformities between February 2017 and May 2019 were included in this study. Sixteen patients (32 cases, study group) were treated with a pressured based 3-dimensional printing insole, and 13 patients (26 cases, control group) were followed up regularly without any treatment. Flatfoot was diagnosed by a lateral talo-first metatarsal angle of more than 4° in convex downward and talocalcaneal angles of more than 30° and a calcaneal pitch of less than 20°. The foot pressures, including the midfoot pressure, total foot pressure, and the ratio of the midfoot pressure to the total foot pressure, were evaluated by pedobarography. The clinical scores were assessed using the visual analogue scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS), and Pediatrics Outcomes Data Collection Instrument (PODCI) scores. Results: The mean age of the study group was 9.16 years, and the mean age of the control group was 7.73 years. The mean follow-up period was 16 months. The change in the lateral talocalcaneal angle was -4.664°±1.239° in the study group and -0.484°±1.513° in the control group. A significant difference in the amount of change of the lateral talocalcaneal angle was observed between the two groups (p=0.034). The midfoot pressures were similar in the two groups. Conclusion: Pressure based customized 3-dimensional printing insole in PFFF may have some effect on the hindfoot bony alignment, but it does not affect the changes in midfoot pressure.