• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1E
• /
• pp.32-36
• /
• 1999

In the area of the speech synthesis techniques, the waveform coding methods maintain the intelligibility and naturalness of synthetic speech. In order to apply the waveform coding techniques to synthesis by rule, we must be able to alter the pitches of synthetic speech. In this paper, we propose a new pitch altering method that compensates phase distortion of the cepstral pitch alteration method with time scaling method in the time domain. This method can remove some spectrum distortion which is occurred in conjunction point between the waveforms. For performance test the spectrum distortion rate was used as objective criterion and the MOS(Mean Opinion Score) was used as subjective criterion. As a result, the spectrum distortion and MOS are obtained by 0.66% and 3.9, respectively.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.6
• /
• pp.211-215
• /
• 2003

Alternating current (AC) losses of two Bi-2223 ([Bi, Pb] : Sr : Ca : Cu :O = 2:2:2:3) tapes [one untwisted (Tape I, twist-pitch of $\infty$ mm) and the other with a twist-pitch of 8mm (Tape II) ] were measured and compared. These samples, produced by the powder-in-tube (PIT) method, are multi-filamentary and have a Ag/Au and Ag matrix, respectively. Susceptibility measurements were conducted while cooling in a magnetic field. Flux loss measurements were conducted as a function of ramping rate, frequency and field direction. The AC flux loss increases as the twist-pitch of the tapes decreased, in agreement with the Norris Equation.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.717-726
• /
• 2003

This paper presents the methods that design the Wavelet-based pitch detector for 2,4 kbps Harmonic-CELP Coder, and that achieve the effective waveform interpolation by decision window shape of the transition region, Waveform interpolation coder operates by encoding one pitch-period-sized segment, a prototype segment, of speech for each frame, generate the smooth waveform interpolation between the prototype segments for voiced frame, But, harmonic synthesis of the prototype waveforms between previous frame and current frame occur not only waveform errors but also discontinuity at frame boundary on that case of pitch halving or doubling, In addtion, in transition region since waveform interpolation coder synthesizes the excitation waveform by using overlap-add with triangularity window, therefore, Harmonic-CELP fail to model the instantaneous increasing speech and synthesis waveform linearly increases, First of all, in order to detect the precise pitch period, we use the hybrid 1st pitch detector, and increse the precision by using 2nd ACF-pitch detector, Next, in order to modify excitation window, we detect the onset, offset of frame by GCI, As the result, pitch doubling is removed and pitch error rate is decreased 5.4% in comparison with ACF, and is decreased 2,66% in comparison with wavelet detector, MOS test improve 0.13 at transition region.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.211-218
• /
• 2021

This paper addressed the problems of controlling the coupled pitch-roll motions in a marine vessel exposed to the regular waves in the longitudinal and transversal directions. Stabilization of the pitch and roll motions can be regarded as the essential task to ensure the safety of a ship's navigation. One of the important features in the pitch-roll motions is the resonance phenomena, which result in unexpected large responses in terms of pitch and roll modes in some specific conditions. Besides, owing to its inherent characteristics of coupled combination and nonlinearity of restoring terms, the vessel shows various dynamical behaviors according to the system parameters, especially in the pitch responses. Above all, it can be seen that suppression of pitch rate remains the most significant challenge to overcome for ship maneuvering safety studies. To secure the stable upright condition, a quasi-sliding mode control scheme is employed to reduce the undesirable pitch and roll responses as well as chattering elimination. The Lyapunov theory is adopted to guarantee the closed stability of the pitch-roll system. Numerical simulations demonstrate the effectiveness of the control scheme. Finally, the control goals of state convergences and chattering reduction are effectively realized through the proposed control synthesis.

• Proceedings of the KSPS conference
• /
• 2002.11a
• /
• pp.73-76
• /
• 2002

The purpose of this paper is to research Korean boundary tone of sentence type and perceptive speaker's attitude according to speech rate - three type. In view of the preceding study, Korean intonation's meaning is determined by boundary tone. Also, in my experimental results, Korean boundary tone of sentence type has preferential tone. However, Korean boundary tone of sentence type is not influential according to speech rate. The speech rate's change of three pattern is influential in auditor's perceptual response. The relationship between the pitch contour of boundary tone and speech rate is not significant.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1093-1101
• /
• 2020

This study was carried out numerically to investigate the air flow and thermal performance around single and parallel fin-tube heat exchangers and the cooling performance of the fluid inside the heat exchangers. In this study, the air velocity(1~7m/s), the pitch of fin(4, 6.1, 8, 11.3, 18.3, 44mm) and the diameter of fin(31, 33, 35, 37, 39mm) were varied. The flow rate of the water at the fin-tube heat exchanger inlet is 89cc/min and the water temperature is 353K. The air temperature at the upstream region of the heat exchanger is 300K. flow rate of the water at the fin-tube heat exchanger inlet is 80cc/min and the water temperature is 353K. It was found that the air pressure drop around single and parallel fin-tube heat exchangers was highly dependent on the air velocity and the fin pitch, but was independent of the fin diameter. Also, it was shown that pressure drop increased more the parallel arrangements than in single heat exchanger. The temperature difference of water at the inlet and outlet of the heat exchanger depended on the air velocity, the fin pitch and the fin diameter, and it was found that the parallel arrangement method further reduced the temperature of water. It was shown that the Nusselt number increased as the Reynolds number and the fin pitch increased, and decreased as the fin diameter increased.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.69-75
• /
• 2010

In this paper, the pitch is detected after the elimination of formant ingredients by flattening the spectrum in frequency domain. In order to remove impact of formant and transition frequency in the signal spectrum, formant envelop is made by linear interpolation with any points each sub-band and the spectrum of speech signal is compensated by the reverse of the envelop interpolated linearly after we divide frequency band into several segment based on LSP and detect the points. The experimental result showed the proposed method appeared an outstanding performance in compared with LPC, Cepstrum, Lifter methods. The method reduced the gross error rate 1.30% than the LPC method which appeared a good performance except the proposed method. Also, the proposed method showed low error rate in noise environment.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.402-406
• /
• 2013

In this study, a pitch for melt-electrospinning was prepared from naphtha cracking bottom (NCB) oil by the modification with heat treatment. The softening point and property of the modified pitch was influenced by modification conditions such as nitrogen flow rate, heat treatment temperature, and reaction time. Among these, the heat treatment temperature had a very strong influence on the distribution of molecular weight and softening point of the pitch. The C/H mole ratio and average molecular weight increased with increasing the heat treatment temperature due the decomposition and cyclization reaction of surface-functional groups. In addition, the values of benzene insoluble and quinoline insoluble also tends to decrease, and the width of molecular weight distribution seems to get more narrow. The carbon fiber with a diameter of $4.8{\mu}m$ was prepared from a modified pitch at the softening point of $155^{\circ}C$ by melt-electrospinning. It is believed that the melt-electro spinning method is much more convenient to get the thinner fiber than the conventional melt spinning method.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.178-185
• /
• 2005

This paper presents a new music identification method using probabilistic and dynamic characteristics of melody. The propo3ed method uses pitch and MFCC parameters as feature vectors for the characteristics of music notes and represents melody pattern by pitch histogram and temporal sequence of codeword indices. We also propose a new pattern matching method for the hybrid method. We have tested the proposed algorithm in small (drama OST) and broad (1.005 popular songs) search spaces. The experimental results on search areas of OST and 1,005 popular songs showed better performance of the proposed method over conventional methods. We achieved the performance improvement of average $9.9\%$ and $10.2\%$ in error reduction rate on each search area.

• Composites Research
• /
• v.33 no.6
• /
• pp.329-335
• /
• 2020

In this study, the thermo-rheological behaivors of petroleum pitches with different softening points were studied, and a B-stage phenolic resins/petroleum pitches blends were prepared by adding petroleum pitches to the phenolic resins. As a result, the petroleum pitch with different softening points decreased the fluidity of the petroleum pitch as the Quinoline insoluble (QI) content increased and showed the viscous properties of the solid. In addition, the effect of adding petroleum pitches having different softening points on the thermo-rheological properties of phenolic resins was investigated. When petroleum pitch with a high softening point was added, the fluidity of the phenolic resin was reduced, and the hardening behavior was fast. It was possible to control the curing rate and curing behavior of the phenolic resin by adding petroleum pitches of different softening points. Among them, the phenolic resin mixture to which P-Pitch 2 was added has a higher fluidity than other blends under the same curing temperature condition.