• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.13-21
• /
• 1992

Standards concerning the determination of positioning accuracy and repeatability of numerically controlled(NC) machine tools have been published relentlessly over the last 20 years. Since the publication in 1988 of the International Standard 230-2 there has been a pronounced move, both at national and international standards level, to embrace further test procedures for a complete machine tool performance assessment. For example, measurements of angular (pitch, roll, and yaw) and straightness errors along linear axes are now commonplace and complement the existing positioning accuracy and repeatablity tests. More recently the subject of circularity evalutaion has also gained considerable interest. Here dynamic tests, using a kinematic ballbar or circular masterpiece, give an instant overview of the contouring ability of the machine in two axes at specific feedrates. This information is extremely important in optimising machining accuracy. This paper describes moves to complete the machine calibration package in national and international standardis- ation for the assessment of machine tool performance.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.185-192
• /
• 2004

The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall sound power level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental blade passing frequency (BPF) is reduced by about 6 dB (A) and the 2$\^$nd/ BPF is reduced about 20 dB (A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.79-88
• /
• 2003

The paper presented here covers the work associated with the flight control law design, ground based and in flight simulation and handling qualities assessment of the Fly-by-Wire type Aircraft (FBWA). The FBWA configurations are of the same generic form of the Korean advanced trainer. The normal acceleration (Nz) and pitch rate (q) feedback control system is employed for longitudinal axis and roll rate (p) and lateral acceleration (Ny) feedback flight control law is developed in lateral/ directional axis. The flight tests for the FBW A dynamics evaluation were executed for the target aircraft (FBWA) on the IFS (In-Flight-Simulator) aircraft . The test results showed that Level 1 handling qualities for the most unstable flight regime and Level 1/2 for the landing approach flight regime were achieved. And the designed FBWA flight control law has revealed acceptable CHR (Cooper-Harper handling qualities Ratings).

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.39-43
• /
• 2009

In this paper, the flow characteristics of underfill material driven by capillary action between flip-chip and substrate were investigated. Also, the effects of viscosity level and dispensing point of underfill on flow characteristics were investigated. Flip chip package size was $5mm{\times}5mm{\times}0.65^tmm$, the diameter of solder bump was 100 ${\mu}m$, and the pitch was 150 ${\mu}m$. It was full grid area-array type with 1024 I/Os. The glass substrate was used and the gap between the chip and substrate was 50 ${\mu}m$. For the experimental study, three different underfills with different viscous properties($2000{\sim}3700$ cps), and two different types of dispensing methods(center dot and edge dot) were used. The flow characteristics and filling time of underfill were investigated by using CCD camera. The results show that the edge flow was faster than center flow due to the edge effect, which was caused by the resistance of solder bumps. In case of edge dot dispensing type, the filling time was faster due to the large edge effect, compared to center dot dispensing type. Also, it was found that the underfill flow was faster and the filling time decreased as the viscosity level of underfill was decreased.

• Speech Sciences
• /
• v.9 no.3
• /
• pp.185-200
• /
• 2002

The current study confirmed the existence of an ip prosodic level in French intonation structure, as previously proposed by Sun-Ah Jun & $C\acute{e}cile$cile Fougeron (2000). However, in contrast to the previous suggestion of the plateau realized in an ip in several syntactic structures, the current study supposed that the plateau doesn't come from the different type of syntactic structures but arise from the unspecified syllables without any PA in an ip. Because if we limited ip phrasal tone to the syntactic structure, it would be difficult to find the more general reasons of ip level. Besides /Hi/ and /$H^*$/ we also used /$Hi^*$/ for the focused syllable in the current study. In emphasized sentences, in general, /$Hi^*$/ appeared in the first or second syllable of a leftward AP in an ip and /$H^*$/ in the final syllable of a rightmost AP of an ip, In contrast to these PAs, /$Hi^*$/ might appear in any syllable in an ip, but not to far from /$H^*$/ because the duration time and length t of plateau realized between /$Hi^*$/ and /$H^*$/ or /Hi/ and /$H^*$/ would make an essential harmonious rhythmic unit, Therefore, the current study determined the duration time and the number of syllables realized in each plateau in an ip level composed of more than one AP. As a phrase constituent structure, there is a practical need for intermediate prosodic units to allow for generalization over the many possible combinations of prosodic patterns that can occur. Further evidence is still needed to analyze and relate the different pitch ranges of the plateau of an ip according to the syntactic structure, to identify the considerable character in the French prosodic hierarchy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.376-379
• /
• 2006

Reaction Wheel Assembly (RWA) is one of the major disturbance sources that have influence upon the Line of Sight (LOS) of payload. A micro-vibration induced by RWA is propagated through the satellite structure and decrease the LOS stability performance of payload. This effect shall be analyzed through the jitter analysis. If a requirement or specification of payload jitter level is found to be not satisfied according to the jitter analysis campaign, some modification or redesign should be done on the satellite structure or a couple of isolator should be attached on the RWA interface in order to reduce the transmitted vibration level of RWA. The purpose of ???RWA isolator test? is to roughly evaluate the performance of vibration suppression level with a passive RWA isolator made of rubber. For this test, actual RWA is used as a vibration source and a couple of cube-shaped rubber mount designed for satellite is used as a passive isolator. There may be several considerations in order to accommodate RWA isolator to spacecraft such as not only vibration reduction performance but also thermal conduction problem, mechanical size, RWA alignment problem, etc. But in this report the feasibility of RWA isolator is analyzed only in a vibration suppression point of view. As a result, high frequency vibration of RWA above 50Hz is perfectly attenuated with isolators, however, first harmonic components below 50Hz became larger due to the additional low frequency resonance modes of roll, pitch, yaw rigid body motion of RWA+bracket.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.148-154
• /
• 2009

In audio coding, SBR technology synthesizes the high-bands using patched time-frequency information from low-bands and the correction parameters, Since SBR transmits only correction parameters for high-bands, it provides a low-rate coding of high-bands, and is used as a core module of MPEG-4 HE-AAC, SBR was originally designed for audio signal and its performance for speech signal tends to decrease, and the major reason is an excessive noise floor in high-bands which is caused by incorrect tonality computation, In this paper, a new method to determine noise floor level in an adaptive fashion according to the speech characteristics is proposed in order to solve the problem of SBR for speech signal, The proposed method maintains the compatibility with the standard SBR, and the subjective performance evaluation shows that the proposed method improves the SBR performance especially for male speech signal compared with the standard SBR.

• Phonetics and Speech Sciences
• /
• v.12 no.4
• /
• pp.27-36
• /
• 2020

The aim of this study is to investigate the perceptive aspects of the polysemic sentence final ending "-(eu)lgeol" produced by Chinese Korean learners. "-(Eu)lgeol" has two different meanings, that is, a guess and a regret, and these different meanings are expressed by the different prosodic features of the last syllable of "-(eu)lgeol". To examine how Korean native speakers perceive "-(eu)lgeol" sentences produced by Chinese Korean learners and the most saliant prosodic variable for the semantic discrimination of "-(eu)lgeol" at the perceptive level, we performed a perceptual experiment. The analysed material constituted four Korean sentences containing "-(eu)lgeol" in which two sentences expressed guesses and the other two expressed regret. Twenty-five Korean native speakers participated in the perceptual experiment. Participants were asked to mark whether "-(eu)lgeol" sentences they listened to were (1) definitely regrets, (2) probably regrets, (3) ambiguous, (4) probably guesses, or (5) definitely guesses based on the prosodic features of the last syllable of "-(eu)lgeol". The analysed prosodic variables were sentence boundary tones, slopes of boundary tones, pitch difference between sentence-final and penultimate syllables, and pitch levels of boundary tones. The results show that all the analysed prosodic variables are significantly correlated with the semantic discrimination of "-(eu)lgeol" and among these prosodic variables, the most salient role in the semantic discrimination of "-(eu)lgeol" is pitch difference between sentence-final syllable and penultimate syllable.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.62-65
• /
• 2009

There have been strong demands for micro size screw with high precision due to miniaturization and integration trends for electronic products such as Hard Disk Drives. The thread rolling process for screw manufacturing are lower unit cost, reduced material utilization, and superior mechanical properties compared to the machining process. But little work has been done on the thread rolling of micro size screw. In this paper, we investigate thread rolling process using Finite Element Analysis (FEA) and parameter study for screw manufacturing. And we also carried out compression tests to obtain the material property and to implement into the FE tool for the numerical simulation. In case that parameter of relative position oldies is half length of pitch for maintaining the continuous thread profiles, we found that shear friction factor was 0.9 during the thread rolling process using FEA. We are trying to develop the thread rolling process using the FE-simulation to manufacture screws which have been commonly produced from the industrial level fabrication at present.

• Journal of Mechanical Science and Technology
• /
• v.14 no.8
• /
• pp.816-822
• /
• 2000

In the core of the nuclear power plant of PWR, several cases of fuel failure by unknown causes have been experienced for various fuel types. From the common features of the failure pattern, failure lead time, flow conditions, and flow induced vibration characteristics in nuclear fuel bundles, it is deduced that the fretting wear failure of the fuel rod at the spacer grid position is due to the fluidelastic vibration. In the past, fluidelastic vibration was simulated by quasi -static semi-analytical model, so called the static model, which could not account for the interaction between the rods within a bundle. To overcome this defect and to provide for more flexibilities applicable to the fuel bundle, Tanaka's unsteady model was modified to accomodate the geometrical differences and governing parameter changes during the operations such as the number of rods, pitch to diameter ratio (P/D), spring force, damping coefficient, etc. The critical velocity was calculated by solving the governing equations with the MATLAB code. A comparison between the estimated critical velocity and the test result shows a good agreement. Finally, the level of decrease of the critical velocity due to the reduction in the spring force and reduced damping coefficient due to the radiation exposure is also estimated.