• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.873-879
• /
• 2000

Experimental investigation was conducted to study the effects of pitch angle maximum camber on the performance and noise of an axial-flow fan used in outdoor-unit of air -conditioner. For this study the axial-flow fan whose pitch angle can be varied was made and the Specific sound Pressure Level and other coefficients were measured using the anechoic fan tester. It is found that pitch angle affects more severly than the maximum camber on the fan performance. On the while the maximum camber affects much on the specific sound power level. Present results show that it is important to choose the optimum pitch angle and maximum camber to design the high-performance and low-noise axial-flow fan and specific noise measured in the anechoic fan tester can be sued effectively for the design of low-noise fan.

• Phonetics and Speech Sciences
• /
• v.5 no.1
• /
• pp.19-26
• /
• 2013

The aerodynamic characteristics (subglottal pressure (Ps) and mean airflow rate (MFR)), fundamental frequency (Fo), intensity (I), vocal efficiency (VE), and closed quotient (CQ) were compared during a sustained vowel /o/ sound under three conditions: in a comfortable loudness and pitch level (condition 1), in a maximum loudness level with a fixed pitch (condition 2), and in a maximum loudness level without a fixed pitch (condition 3). Also, multiple regression analyses were done to measure the aerodynamic characteristics affect on the VE and the CQ in each condition. The results showed the Fo, Ps, MFR, VE, and CQ increased as I increased with and without fixed pitch. Most notably, VE in condition 3 was the highest of all the conditions, but CQ was not very high. By the results of multiple regression analysis, VE was significantly affected by I and Ps in all conditions; Fo was the other main key for affecting VE in high pitch. However, none of the aerodynamic characteristics significantly affected CQ. As I increases, Fo should be increased by increasing Ps and VE. Therefore, researchers should consider and specify an a priori to Fo, Ps, and I when measuring VE to examine the complex and delicate vocal mechanism.

• Phonetics and Speech Sciences
• /
• v.3 no.2
• /
• pp.11-22
• /
• 2011

The purpose of this study is to find the influence of Chinese falling-rising tone on the pitch pattern of corresponding Sino-Korean words delivered by Chinese learners of Korean and to examine how the falling-rising tone of corresponding Chinese words affect the pitch patterns of Sino-Korean words. The scope of this research is limited to Chinese learners of Korean, especially when they pronounce same-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. Learners' pitch patterns were recorded and analyzed using software and compared with the tone of corresponding Chinese words. Experimental results showed that Sino-Korean words were affected by Chinese 'falling-rising tone - high and level tone' when they started with lenis sounds. On the other hand, when Sino-Korean words started with aspirated sounds they were affected by Chinese 'falling-rising tone - high and level tone', 'falling-rising tone - falling-rising tone', and 'falling-rising tone - falling tone'. In conclusion, the Chinese learners' pitch patterns of Sino-Korean words are affected by Chinese falling-rising tone, especially when Sino-Korean words start with aspirated sounds.

• Phonetics and Speech Sciences
• /
• v.6 no.3
• /
• pp.131-138
• /
• 2014

A close-copy stylization of intonation curve was used for an acoustical analysis of emotional speech. For the analysis, 408 utterances of five emotions (happiness, anger, fear, neutral and sadness) were processed to extract acoustical feature values. The results show that certain pitch point features (pitch point movement time and pitch point distance within a sentence) and sentence level features (pitch range of a final pitch point, pitch range of a sentence and pitch slope of a sentence) are affected by emotions. Pitch point movement time, pitch point distance within a sentence and pitch slope of a sentence show no significant difference between male and female participants. The emotions with high arousal (happiness and anger) are consistently distinguished from the emotion with low arousal (sadness) in terms of these acoustical features. Emotions with higher arousal show steeper pitch slope of a sentence. They have steeper pitch slope at the end of a sentence. They also show wider pitch range of a sentence. The acoustical analysis in this study implies the possibility that the measurement of these acoustical features can be used to cluster and identify emotions of speech.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.9
• /
• pp.565-571
• /
• 2000

SRM has been applied to many commercial applications that require economical advantages and high performance abilities. But it has some drawbacks such as acoustic noise due to the abrupt change of mmf level when commutation. The abrupt change of a phase excitation produces mechanical stresses and it results in torque ripple and noise. This paper deals with an analysis of vibration and noise in SRM drive. Several types of excitation method are taken into account. The 1-phase and 2-phase excitation technique of short-pitch winding 2-phase excitation technique of full-pitch winding are tested. The acoustic noise is reduced remarkably through the sequential phase excitation in the 2-phase excitation. It is because that the scheme reduces abrupt change of excitation level by distributed balanced excitation with free-wheeling during commutation.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.5 no.1
• /
• pp.11-21
• /
• 1994

The vocal pitch is controlled by the tension, mass, and length of the vocal fold. It is well known that cricothyroid approximation raises the vocal pitch by simulating the contraction of the cricothyroid muscle, and there were so many reports that have noted a relationship between cricothyroid distance and pitch control, but there does not seem to be any single generally accepted theory to account for this connection. It is generally known that the strap muscles are active during low and falling Fo, and the suprahyoid muscles are active during high and raising Fo. These findings can be related to a general picture of the motion of the larynx during changes in Fo, the cricothyroid joint would tend to lengthen the vocal folds, as the larynx moves up and forward, and relax them as it moves back and down. In this study, we suggest that the relationship between anterior cricothyroid distance and fundamental frequency of the larynx was so complex according to the level of larynx and vertebral curvature. The higher the level of larynx, the wider the cricothyoid distance, but there is more greater fundamental frequency even though more wide cricothyroid distance. This phono-menon seems to be due to the multifactors, especially the vertical tension of the conus elasticus or the change of cricothyroid articulation. It is generally known that the crocothyoid and vocal is muscles are very closely related to pitch elevation, but sternohyoid muscle seems to be more closely related to pitch lowering. By this electromyographic studies, the sternohyoid muscle have dual activity to pitch control, increased activity during the low fundamental frequency and falling pitch, but also increased activity during the higher fundamental frequency and raising pitch at least in this study.

• Phonetics and Speech Sciences
• /
• v.4 no.4
• /
• pp.139-146
• /
• 2012

This study was designed to examine comfort levels of pitch and loudness with target matching and their effects on electroglottographic (EGG) and acoustic measures. Twelve speakers, six males and six females, were instructed to produce /a/ sustained vowel for three seconds at a comfortable pitch and loudness level without any instruction and with a target matching procedure of either a certain f0 or SPL separately with visual and auditory feedback. The range of pitch for females and males were presented by progressing up and down randomly at intervals of 5Hz from 150 Hz to 310 Hz (total 33 frequency targets) and from 85 Hz to 190 Hz (total 22 frequency targets), respectively. The loudness levels were 65, 75, 85, 95 dB (total of four intensity targets) for both males and females. Subjective estimations of comfortable levels were obtained using a 10-point equal-appearing interval rating scale following each phonation. The results showed that males and females demonstrated similar trends in loudness levels with greatest comfort at 75 dB, whereas pitch comfort ratings showed a greater variability with females having a wider range with target matching. In the comfort levels of individuals, most male and female speakers rated higher comfort at soft, rather than loud phonations. On the other hand, most male speakers perceived highest comfort levels below the comfort pitch levels they phonated under natural conditions. Higher frequency ranges, however, were perceived to be more comfortable than those of natural condition in most female speakers, although the comfortable pitch levels in spontaneous phonations were within the comfort level ranges determined by targeted phonations. When comparing acoustic (%jitter, %shimmer, SNR) and EGG measures (CQ%) between spontaneous comfortable phonations and targeted phonations produced by the same subject at similar f0 and intensity, no significant differences were observed (p>0.05). Thus, target matching procedures may be considered a compatible and alternative method to reduce the variability of comfortable pitch and loudness levels by eliciting consistent comfortable phonations.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.111-119
• /
• 2002

Gears are essential elements for mechanical power transmission. Geometric precision is the main factor for characterizing gear grade and qualify. Gear pitch is one of the crucial measurements, which is defined as a distance between two adjacent gear teeth. It is well-known that variability in gear pitches may causes wear-out and vibration noise. Therefore maintaining pitch errors at a low level plays a key role in assuring the gear quality to customers. This paper is concerned with a case study, which presents a computerized system for Inspecting pitch errors in a gear machining process. This system consists of a PC and window-based programs. Although the start and stop is manually accomplished, the process of measuring and analyzing pitch data is automatically conducted in this system. Our purpose lies in reducing inspection cost and time as well as Increasing test reliability. Its operation is briefly illustrated by example. Sometimes a strong autocorrelation is observed from pitch data. We also discuss a process monitoring scheme taking account of autocorrelations.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.981-989
• /
• 2020

In this study, a self-made customized phantom was used to quantitatively measure the change in CT number and noise according to the change of pitch. In order to acquire an image using the phantom, the inside of the phantom was filled with sterile distilled water. Inside the glass tube, a solution obtained by diluting the ratio of normal saline and contrast medium to 100%(NS), 400:1, 200:1, 100:1, 50:1, respectively, was placed and imaged. At this time, the pitch was divided into steps of 0, 0.35, 0.7, 1.05, and 1.4 for each dilution ratio of the solution and imaged, respectively. One-way ANOVA analysis were performed to verify whether the mean of the CT number and noise values measured in all ROIs by dilution ratio showed a significant difference according to the change in pitch. As a result of the experiment, there was no statistically significant difference in the change of the CT number according to the change in the pitch for each dilution ratio, but the noise value tended to increase with the increase of the pitch, and showed a statistically significant difference. In the spiral image acquisition of CT, noise can be changed to a significant level depending on the pitch. Therefore, it will be necessary to set the quality evaluation items and criteria for CT images using the spiral image acquisition method.

• Speech Sciences
• /
• v.14 no.2
• /
• pp.23-33
• /
• 2007

This study examined the aerodynamic functions (mean airflow rate MFR, subglottal pressure Psub) and closed quotients (CQs) in the fixed pitch (C3, E3, G3, C4) with the variable loudness (70 and 80 dB) as well as in the fixed loudness at 70 dB and 80 dB with the variable pitch (C3, E3, G3, C4) in five classic male singers (Baritone). Results showed that MFR significantly increased at C3, E3, and G3 and Psub significantly increased at C4 when the loudness increased from 70 to 80 dB. At 70 dB, MFR and Psub significantly increased and CQ significantly decreased when the pitch increased from C3 to C4. At 80 dB, MFR significantly decreased when the pitch increased from C3 to G3. However, Psub showed the significant decrease with the pitch increased at 80 dB. In conclusion, as the loudness increases, the aerodynamic loss is getting higher and vocal efficiency becomes lower at low pitch than at higher pitch. At a low loudness level, the main mechanism to control loudness is the amount of medial compression of the vocal folds rather than the aerodynamic function. In addition, the aerodynamic function and medial compression of the vocal folds have a significant role in increasing the loudness level.