• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.375-376
• /
• 2007

In this work, we have simulated a 42-inch LED BLU which was based on 300 RGB LEDs. We have done an adjustment of LEDs' strip distance and a height of the top of the LED to the back of the LCD to get white color uniformity. So, we have changed simultaneously the distance between the top of the LEDs and the back of the LCD. Moreover, we set a fixed position for the horizontal of LED's pitch. And then, we have experimented and compared to our simulation data.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.63-69
• /
• 2001

A corpus-based lip sync algorithm for synthesizing natural face animation is proposed in this paper. To get the lip parameters, some marks were attached some marks to the speaker's face, and the marks' positions were extracted with some Image processing methods. Also, the spoken utterances were labeled with HTK and prosodic information (duration, pitch and intensity) were analyzed. An audio-visual corpus was constructed by combining the speech and image information. The basic unit used in our approach is syllable unit. Based on this Audio-visual corpus, lip information represented by mark's positions was synthesized. That is. the best syllable units are selected from the audio-visual corpus and each visual information of selected syllable units are concatenated. There are two processes to obtain the best units. One is to select the N-best candidates for each syllable. The other is to select the best smooth unit sequences, which is done by Viterbi decoding algorithm. For these process, the two distance proposed between syllable units. They are a phonetic environment distance measure and a prosody distance measure. Computer simulation results showed that our proposed algorithm had good performances. Especially, it was shown that pitch and intensity information is also important as like duration information in lip sync.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.565-571
• /
• 2001

The objective of this study was to investigate the characteristics of air flow and heat transfer caused by trapezoid rods array in impinging air jet system. In this study, trapezoid rods have been set up on front of flat plate to act as a turbulence promoter. Local Nusselt numbers were determined as a function of three parameters: (a) the space from rods to heating surface(C=1, 2, 4mm), (b) the pitch between each rods(P=30, 40, 50mm), (c) the distance from nozzle exit to flat plate(H/B=2, 6, 10). And this research compared the above with the experiment without trapezoid rods. As a result, heat transfer performance was best under the condition of C=1mm and as the pitch is 30mm. In this case, maximum rate of heat transfer augmentation is about 1.9 times greater compared to that without trapezoid rods.

• Journal of Sasang Constitutional Medicine
• /
• v.11 no.1
• /
• pp.137-157
• /
• 1999

The purpose of this study is to help classifying Sasang Constitution through correlation with sound characteristic. This study was done it under the suppose that Sasang Constitution has correlation with sound spectrogram. The following result were obtained about correlation between sound spectrogram and Sasang Constitution by comparison and analysis 1. Soeumin answered his voice low tone, smooth and quiet in the survey. Soyangin answered his voice high, clear, fast and speaking random. Taeumin answered his voice low, thick and muddy. 2. Taeyangin was significantly slow compared with the others in the time of reading composition. Taeyangin was significantly slow compared with the others in Formant frequency 1. Taeyangin was significantly discriminated from Soeumin in Formant frequency 5. Taeyangin was significantly low compared with the others in Bandwidth 2. Soeumln was significantly low compared with Taeyangin in Pitch Maximum and Pitch Maximum-Pitch Minimum. Taeyangin was significantly high compared with the others in Energy mean. 3. In list of specification, the discrimination rate was higher than that by lists of 13 in the results of Multi-dimensional 4-class minimum-distance. The discrimination rate of three disposition except Soyangin was higher than that of four disposition in the results of One way ANOVA and Analysis of dis crimination in SPSS/PC+. In CART, the estimate rate of Sasang Constitution discrimination was higher than any other method. It is considered that there is a correlation between sound spectrogram and Sasang constitution according to the results. And method of Sasang constitution classification through sound spectrogram analysis can be one method as assistant for the objectification of Sasang constitution classification.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.11 no.1
• /
• pp.13-22
• /
• 1991

In this paper, 3-dimensional fracture phenomena in the local area near a through notch tip located between the surface and the canter were investigated by using embedded dyeing grids with the pitch of $50.8{\mu}$. It was confirmed that displacement V and square root of distance from notch tip $y^{1/2}$ are not proportional in the local area of $\sqrt{{\mid}y{\mid}}\;<\;0.3mm^{1/2}$ and the maximum shea strain ${\varepsilon}_{xymax}$ near a notch tip occurred at the curvature beginning point of the notch curve. It was also noted that the maximum strain ${\varepsilon}_{xymax}$ in the thickness direction occurred at the interior, where the ratio of the distance measured from surface to the half of thickness of specimen is 0.3.

• Steel and Composite Structures
• /
• v.9 no.2
• /
• pp.173-189
• /
• 2009

This paper presents a study on the behavior and design of bolted stainless steel plates under in-plane tension. Using an experimentally validated finite element (FE) program strength of stainless steel bolted plates under tension is examined with an emphasis on plate bearing mode of failure. A numerical parametric study was carried out which includes examining the behavior of stainless steel plate models with various proportions, bolt locations and in two different material grades. The models were designed to fail particularly in bolt tear-out and material piling-up modes. In the numerical simulation of the models, non-linear stress-strain material behavior of stainless steel was considered by using expressions which represent the full range of strains up to the ultimate tensile strain. Using the results of the parametric study, the effect of variations in bolt positions, such as end and edge distance and bolt pitch distance on bearing resistance of stainless steel bolted plates under in-plane tension has been investigated. Finally, the results obtained are critically examined using design estimations of the currently available international design guidance.

• Wind and Structures
• /
• v.28 no.3
• /
• pp.191-201
• /
• 2019

In this paper, the aerodynamic analysis of a vertical axis wind turbine was carried out by CFD approach to optimize the turbine performance. To perform numerical simulation, SST-Transition turbulence model was used, which demonstrated more precise results compared to non-transition models. A parametric study was conducted to optimize the VAWT performance based on the selected model. The investigation of pitch angle changes showed that the highest power produced by the turbine occurs at $2^{\circ}$ angle. Considering the effect of the rotor's arm junction to the airfoil showed that by increasing the distance of the junction from the edge of the airfoil from 25 cm to 40 cm, the power of the turbine increases by 60%. However, further increase in this distance results in power decrease. Based on the proposed numerical model, a case study was conducted to consider the installation of four VAWTs in the southwest corner of the medical science building at TMU campus with a height of 42m. The results of the simulation showed that 8.27 MWh energy is obtainable annually.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2020

If a dangerous situation arises in a place where out of reach from the human, UAVs can be used to determine the size and location of the situation to reduce the further damage. With this in mind, this paper sets the minimum value of the roll, pitch, and yaw using beta flight to detect the UAV's smooth hovering, integration, and derivative (PID) values to ensure that the UAV stays horizontal, minimizing errors for safe hovering, and the camera uses Open CV to install the Raspberry Pi program and then HSV (color, saturation, Brightness) using the color palette, the filter is black and white except for the red color, which is the closest to the fire we want, so that the UAV detects the image in the air in real time. Finally, it was confirmed that hovering was possible at a height of 0.5 to 5m, and red color recognition was possible at a distance of 5cm and at a distance of 5m.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.2
• /
• pp.121-129
• /
• 2013

Purpose: To evaluate the radiographic characteristics of the tarsometatarsal osteoarthritis with hallux valgus deformity and report the clinical results of the operative treatment. Materials and Methods: This is a retrospective study of 20 patients, 22 feet who had been operated for non-traumatic tarsometatarsal osteoarthritis with hallux valgus (TMT group) and control group of hallux valgus patients without tarsometatarsal osteoarthritis (26 patients, 28 feet) from April 2004 to July 2011. Radiographic characteristics were compared between the groups, using hallux valgus angle, $1^{st}-2^{nd}$ intermetatarsal angle, metatarsal length ratio, metatarsus adductus angle, talonavicular coverage angle, talus-$1^{st}$ metatarsal angle, calcaneal pitch angle and medial cuneiform height. Pre- and postoperative difference of $1^{st}-2^{nd}$ metatarsal declination angle and distance between the $1^{st}-2^{nd}$ metatarsal head were evaluated. The clinical results were evaluated by American Orthopaedics Foot and Ankle Society (AOFAS) midfoot scale and visual analogue scale (VAS). Results: Metatarsal length ratio was significantly larger in TMT group (p<0.001). Metatarsus adductus angle, talonavicular coverage angle, talus-$1^{st}$ metatarsal angle on lateral radiograph, calcaneal pitch angle and medial cuneiform height were different from control group (p<0.001, p<0.001, p=0.001, p=0.010, p=0.006). Postoperative declination of the $2^{nd}$ metatarsal and distance between the $1^{st}-2^{nd}$ metatarsal head were increased (p=0.009, p=0.001). The AOFAS and VAS score were improved (p<0.001, p<0.001). Conclusion: Non-traumatic osteoarthritis of the tarsometatarsal joints seems to be associated with long 2nd metatarsal length, metatarsus adductus and flatfoot deformity. Spur excision may be successful to relieve symptoms when the arthritis was diagnosed in early stage.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.4
• /
• pp.383-391
• /
• 2009

In speech signal processing, speech signal corrupted by noise should be enhanced to improve quality. Usually noise estimation methods need flexibility for variable environment. Noise profile is renewed on silence region to avoid effects of speech properties. So we have to preprocess finding voice region before noise estimation. However, if received signal does not have silence region, we cannot apply that method. In this paper, we proposed SNR estimation method for continuous speech signal. The waveform which is stationary region of voiced speech is very correlated by pitch period. So we can estimate the SNR by correlation of near waveform after dividing a frame for each pitch. For unvoiced speech signal, vocal track characteristic is reflected by noise, so we can estimate SNR by using spectral distance between spectrum of received signal and estimated vocal track. Lastly, energy of speech signal is mostly distributed on voiced region, so we can estimate SNR by the ratio of voiced region energy to unvoiced.