• Composites Research
• /
• 제29권5호
• /
• pp.256-261
• /
• 2016

본 연구에서는 습식공정을 이용한 Pitch계 활성탄소섬유와 바인더 섬유를 이용하여 필터 페이퍼를 제조하였다. 필터 페이퍼 내 바인더 섬유의 함량이 기공특성에 미치는 영향을 알아보기 위해 77 K에서 질소 흡착 등 온선과 주사 전자 현미경을 통해 흡착특성을 비교 분석하였다. Pitch계 활성탄소섬유와 바인더 섬유와의 최적 비율은 70:30 비율로 가장 균일한 기공 및 결합력이 좋은 페이퍼의 모습을 보였으며, 바인더 섬유의 함량이 적을수록 높은 비표면적 값을 확인하였다. Pitch계 활성탄소섬유와 바인더 섬유의 종류와는 상관없이 70:30 비율에서 최적의 페이퍼가 제조되었으며, $650.4m^2/g$의 비표면적 값과 86.9%의 유해가스 제거율을 확인하였다. 또한 필터 페이퍼의 평균 기공 크기 분포는 바인더 섬유의 영향을 받지 않는 것으로 관찰되었다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.276-283
• /
• 2018

For the first time, polyvinyl chloride (PVC) was used as an easily-handled chlorine source for preparation of isotropic pitch-based carbon fiber (IPCF) incorporating ethylene bottom oil (EO) as a raw material. Pitch precursors were prepared by the chlorination-dehydrochlorination triggered by chlorine radicals originated from PVC; aromatization and poly-condensation reactions occurred by polyene-type radicals from PVC. Radical production and co-carbonization were facilitated by pretreatments of EO through vacuum distillation, bromination, and additional heat treatment. Pitches were prepared by the co-carbonization of pretreated EO and EO containing 20 wt% PVC, and had higher yields and better spinnability than those by simple distillation.

• Carbon letters
• /
• 제8권2호
• /
• pp.127-133
• /
• 2007

In this study, commercially available pitch-based carbon fibers of general grade were post-heat-treated using a boxtype high temperature furnace at $1800^{\circ}C$, $2000^{\circ}$, $2200^{\circ}C$, and $2400^{\circ}C$, respectively. The fundamental characteristics of each heat-treated carbon fibers were investigated in terms of chemical composition, morphology, thermal stability, X-ray diffraction, single filament tensile test, and electrical resistivity. The result showed that the fiber properties were significantly influenced by the post-heat-treatment, indicating the greater effect with increasing treatment temperature. The carbon contents, thermal stability, and tensile properties of the carbon fibers used here were further increased by the post-heat-treatment, whereas the d-spacing between graphene layers and the electrical resistivity were reduced with increasing post-heat-treatment temperature.

• Composites Research
• /
• 제31권6호
• /
• pp.412-420
• /
• 2018

본 연구에서는 면상발열체 특성을 향상시키기 위해 피치계 탄소종이에 전도성 탄소필러로 석유계 코크스, 카본블랙, 흑연을 페놀수지와 함께 함침시켰으며, 탄소종이에 함침된 탄소필러가 물리화학적 성질에 미치는 영향을 전기적, 열적 특성 분석을 통해 고찰하였다. 그 결과, 면저항과 계면접촉저항이 선형적으로 감소하였으며, 탄소필러의 함량이 증가함으로써 전기전도도와 열전도도가 향상하였다. 또한, 탄소종이에 1~5 V 전압을 인가하였을 경우 탄소종이의 면상발열 특성을 관찰하였을 때 5 V 전압에서 최대 $125.01^{\circ}C$로 발열 특성을 나타내었다. 이러한 결과는 탄소섬유 사이에 존재하는 미세공극이 채워짐으로써, 전기적 네트워크가 형성되어 전기적 및 열적 특성이 향상되었기 때문이다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 춘계학술발표회 논문집
• /
• pp.323-327
• /
• 1997

• Carbon letters
• /
• 제16권2호
• /
• pp.121-126
• /
• 2015

Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile strength of 0.54 GPa for a similar fiber diameter. Elemental, Fourier-transform infrared spectroscopy, and thermogravimetric analyses indicate that E-beam irradiation is an efficient oxidation and dehydrogenation treatment for pitch fibers by showing that the intensity of the aliphatic C-H stretching and aromatic $CH_2$ bending (out-of-plane) bands significantly decrease and carbonyl and carboxylic groups form.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.99-106
• /
• 1991

Result of an experimental study on the manufacture, the mechanical properties and waterightness of pitch-based carbon fiber reinforced fly ash.cement composites are presented in this paper. The carbon fiber reinforced fly ash.cement composites using early strength cement, silica powder and a small amount of stylene butadiene rubber latex are prepared with carbon fiber, foaming agents and mixing conditions. As a result, the mechanical and plysical properties such as compresive, tensile and flectural strengths, watertightness and cement composites are improved by using a small amount of stylene butadiene rubber latex.

• Carbon letters
• /
• 제9권2호
• /
• pp.121-126
• /
• 2008

High modulus pitch based carbon fibers (HM) were exposed to isothermal oxidation using tube furnace in carbon dioxide gas to study the oxidation kinetics under the temperature of $800-1100^{\circ}C$. The kinetic equation $f=1-{\exp}(-at^b)$ was introduced and the constant b was obtained in the range of 1.02~1.42. The oxidation kinetics were evaluated by the reaction-controlling regime (RCR) depending upon the apparent activation energies with the conversion increasing from 0.2 to 0.8. The activation energies decrease from 24.7 to 21.0 kcal/mole with the conversion increasing from 0.2 to 0.8, respectively. According to the RCR, the reaction was limited by more diffusion controlling regime for the HM fibers with the conversion increasing. Therefore, it seems that the oxidation which is under the diffusion controlling regime takes place continuously from the skin to the core of the fiber.

• Carbon letters
• /
• 제5권1호
• /
• pp.27-33
• /
• 2004

Structural changes of high modulus carbon fiber by oxidation in carbon dioxide gas using SEM, TEM, and XRD have been observed. It was shown that the originally high modulus carbon fiber is composed of highly ordered graphitic crystalline area and non-crystalline area. It was observed that the La increases during the whole oxidation process. It was shown that the oxidation of high modulus carbon fiber initiates at the non-crystalline area and at the ends of fiber. The large pores developed in fiber by direction of fiber length at high temperature ($1,100^{\circ}C$), and the small pores developed on the fiber surface at low temperature ($900^{\circ}C$). In conclusion, it is found that the oxidation of the carbon fiber was progressed through the imperfection.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1989년도 가을 학술발표회 논문집
• /
• pp.31-34
• /
• 1989

In order to discuss the engineering properties of carbon fiber reinforced cement composites with silica fume and silica powder, experimental studies in the CFRC were carried out. The types of fiber used which are in CFRC are PAN-based carbon fiber and Pitch-based carbon fiber. To examine the effects of types, lengths, contents of carbon fiber and matrices, their properties of fresh and fardened CFRC were tested. According to the test results, the process technology of light-weight CFRC is developed and their potimum mix proportions are successfully proposed. Also, it can be concluded that the reinforcement of carbon fiber is considerably effective in improving tensile strenghth, flexural strength, toughness and loss of shrinkage of CFRC compared with conventional mortar.