• 한국결정성장학회지
• /
• 제10권6호
• /
• pp.373-377
• /
• 2000

승화 성장법으로 성장된 6H-SiC 단결정에 대하여 etching을 행하여 형성된 etch pit의 형상과 결함과의 관계에 대하여 고찰하였다. (0001) 기저면에서는 육각형의 전형적인 etch pit이 형성되었다. micropipe에 의해서도 유사한 형태의 pit이 형성되었으며, 면결함에 형성된 etch pits을 통하여 SiC 결정의 내부에 형성된 planar defects도 성장 결정과 동일한 구조를 가지면서 형성됨을 알 수 있었다.

• Fisheries and Aquatic Sciences
• /
• 제2권1호
• /
• pp.25-31
• /
• 1999

Developmental morphology of the red alga, Osmundea crispa (Hollenberg) Nam from California was studied on the basis of liquid-preserved and herbarium specimens. Vegetative axial segment of the species produces two pericentral cells and one trichoblast. Spermatangial filaments (branches) are derived from apical and epidermal cells in pocket-shaped apical pit with an ostiole-like upper opening. Procarp-bearing segment of female trichoblast produces five pericentral cells, of which the fifth functions as supporting cell of carpogonial branch. Tetrasporangial production occurs in random epidermal cells in apical pit of branchlets, and two presporangial cover cells show parallel arrangement to stichidial axis. As this vegetative and reproductive development is included in the generic delineation of Osmundea Stackhouse, O. crispa among the known Osmundea species is characterized by habit forming compact cushion-like clump with angular to terete thallus. It is also distinguished from O. hybrida (AP. de Candolle) Nam without the compressed thallus by the number of pericentral cells in procarp-bearing segment and shape of spermatangial pit. Taxonomic implication of the shape of spermatangial pit is also included.

• 한국과학교육학회지
• /
• 제27권9호
• /
• pp.919-929
• /
• 2007

본 연구는 우리나라 대학의 식물형태학 분야에서 사용하는 유관속조직의 구조에 관한 용어들 가운데,교재 또는 저술자에 따라 다르게 번역되어 쓰이고 있는 한글 용어들의 합리적인 표기를 제안하기 위한 것이다. 대학에서 교재로 사용되는 일반생물학,일반식물학,식물형태학 등 14종의 교재에서 서로 다르게 표기되어 있는 대표적인 12개 용어의 어원과 정의를 조사 분석한 결과 제시된 한글 용어의 표기는 다음과 같다. 즉 목부(木部,물관부)의 구조에 관한 용어로서 "apotracheal parenchyma"는 "도관분리형유조직(導管分離形柔祖熾)" 으로 표기하고, "paratracheal parenchyma"는 "도관연접형유조직(導管連接形柔組織)"으로,"tylose"는 "전충체(塡充體)"로 표기하는 것이 적합하다. 벽공(壁孔)의 구조에 관한 용어로서 "simple pit"는 "단순벽공(單純壁孔)"으로 표기하고, "bordered pit"는 "유연벽공(有緣壁孔)"으로,"aspirated bordered pit"는 "흡착유연벽공(吸着有緣壁孔)"으로,"pit aperture"는 "벽공구(壁孔口)"로 표기하는 것이 합당하다. 그러고 중심주(中心柱)의 구조에 관한 용어로서 "haplostele"은 "단순중심주(單純中心柱)"로 표기하고, "actinosteIe"은 "방사중심주(放射中心柱)"로, "plectostele"은 "습곡중심주(褶曲中心柱)"로,"solenosteIe"은 "통로중심주(通路中心柱)"로 표기하는 것이 합리적이다. 이러한 연구를 통해서 식물학 분야를 가르치는 교수자와 배우는 학습자들 사이에 생물학적 개념을 올바르게 전달하고 이해를 증진시킬 수 있을 것으로 기대된다.

• 대한토목학회논문집
• /
• 제32권1B호
• /
• pp.53-57
• /
• 2012

본 연구에서는 하천에서 준설 웅덩이의 발달과정을 모의할 수 있는 수치모형을 제시하였다. 제시된 수치모형은 준정류 가정에 기초하는데, 이는 흐름은 정상류이고 하상은 시간에 따라 변한다고 가정하는 것이다. 준정류 모형은 흐름에 비해 하도 변형이 장기간에 걸쳐 진행된다는 사실에 근거한다. 총유사량 공식으로 Engelund and Hansen 공식과 Ackers and White 공식을 이용하여 수치실험을 실시하였다. Engelund and Hansen 공식을 사용하였을 때, Parker(2004)에 제시된 준설웅덩이의 되메움 과정을 정량적으로 유사하게 모의하는 것으로 나타났다. 제시된 모형의 적용성을 검토하기 위하여 선행 실내실험에 적용하였다. 전반적으로 준정류 모형이 실험수로에서 웅덩이의 발달과정을 잘 모의하는 것으로 확인되었다. 그러나 수치모형이 웅덩이 상류측으로 전파되는 두부침식 현상을 재현하지 못하며, 되메움 이후 하류로 전파되는 하상파를 과소 산정하는 것으로 나타났다.

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.261-264
• /
• 2012

본 연구에서는 HVPE법으로 사파이어 기판(0001) 위에 성장시킨 GaN epilayer의 etching에 따른 표면변화 특성을 조사하였다. 주사전자 현미경(SEM) 관찰 결과, 3가지 형태를 갖는 육각형 모양의 etch pit(edge, screw, mixed) 들이 GaN epilayer의 두께 변화에 따라서 형성되었다. 이러한 관통전위들은(TDs) epilayer의 두께가 얇고, etch pit density가 높을수록 screw and mixed type TDs이 많이 관찰되었고, 두께가 증가할수록 etch pit density가 낮아지면서 edge and mixed type TDs들이 주로 존재하는 것을 관찰 할 수 있었다.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.385-401
• /
• 2023

Steel is becoming increasingly popular due to its high strength, excellent ductility, great assembly performance, and recyclability. In reality, steel structures serving for a long time in atmospheric, industrial, and marine environments inevitably suffer from corrosion, which significantly decreases the durability and the service life with the exposure time. For the mechanical properties of corroded steel, experimental studies are mainly conducted. The existing numerical analyses only evaluate the mechanical properties based on corroded morphology at the isolated time-in-point, ignoring that this morphology varies continuously with corrosion time. To solve this problem, the relationships between pit depth expectation, standard deviation, and corrosion time are initially constructed based on a large amount of wet-dry cyclic accelerated test data. Successively, based on that, an in-situ pitting evolution method for evaluating the residual tensile strength of corroded steel is proposed. To verify the method, 20 repeated simulations of mass loss rates and mechanical properties are adopted against the test results. Then, numerical analyses are conducted on 135 models of corrosion pits with different aspect ratios and uneven corrosion degree on two corroded surfaces. Results show that the power function with exponents of 1.483 and 1.091 can well describe the increase in pit depth expectation and standard deviation with corrosion time, respectively. The effect of the commonly used pit aspect ratios of 0.10-0.25 on yield strength and ultimate strength is negligible. Besides, pit number ratio α equating to 0.6 is the critical value for the strength degradation. When α is less than 0.6, the pit number increases with α, accelerating the degradation of strength. Otherwise, the strength degradation is weakened. In addition, a power function model is adopted to characterize the degradation of yield strength and ultimate strength with corrosion time, which is revised by initial steel plate thickness.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.217-225
• /
• 1999

The effect on the pitting corrosion resistance of laser welding and surface treatment developed as a repair method of stream generator tubing material that was a major component of primary system at nuclear power plant was observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface melted and the microstructural characteristics were examined. The pitting corrosion resistance was examined through Ep(pitting potential) and degree of pit generation by means of the electrochemical tests and the immersion tests respectively. The pit formation characteristics were investigated through microstructural changes and the pit initiation site and pit morphology. The test results showed that the pitting corrosion resistances was increased in the order of the followings; sensitized Alloy 600, solution annealed alloy600, and laser surface melted Alloy 600. Pits were initiated preferably at Ti-containing inclusions and their surroundings in all tested specimens and it is believed that higher pitting resistance of laser-surface treated Alloy 600 was caused by fine, homogeneous distribution of non-soluble inclusions, the disappearance of grain boundary, and the formation of dense, stable oxide film. The major element of corrosion products filled in the pit was Cr. On the other hand, Fe was enriched in the deposit formed on the pit.

• 전기화학회지
• /
• 제6권4호
• /
• pp.271-281
• /
• 2003

The present article is concerned with pitting corrosion of Inconel alloy 600 at elevated solution temperatures. This article first summarized the previous works on the characteristics and the growth models of oxide film grown on alloy 600 at elevated solution temperatures. Thereafter, this article reviewed previous works on the morphological study on pitting corrosion of alloy 600 as functions of solution temperature and such anion additives as thiosulphate, sulphate, nitrate and bicarbonate ions in terms of pit morphology and its fractal dimension.

• 환경생물
• /
• 제40권3호
• /
• pp.301-306
• /
• 2022

The vegetative and reproductive morphology of some parasitic Janczewskia Solms-Laubach species including the type species was examined based on specimens collected from various localities around the world. In J. gardneri Setchell et Guernsey on Osmundea spectabilis (Postels et Ruprecht) Nam from California, secondary pit connections are not found between epidermal cells and vegetative axial cells have two pericentral cells. As its host, J. gardneri also has a typical filament type male structure in an apical urn-shaped pit of branches rather than the trichoblast type in other species including the type J. verruciformis Solms-Laubach and tetrasporangial origin of epidermal cells rather than pericentral cells. These significant differences between the species suggest that J. gardneri should be separated from the genus Janczewskia. Based on this morphological data, the section Heterojanczewskia Setchell including J. gardneri, together with an emendation of the generic delineation of Janczewskia, is elevated to the genus level. Relevant nomenclatural changes for some Janczewskia species are also included here.

• Advances in materials Research
• /
• 제4권4호
• /
• pp.215-226
• /
• 2015

Experiment on roughness and micro pit defects of SUS 430 ferrite stainless steel was investigated in laboratory. The relation between roughness and glossiness with reduction in height, roll surface roughness, emulsion parameters was analyzed. The surface morphology of micro pit defects was observed by SEM, and the effects of micro pit defects on rolling reduction, roll surface roughness, emulsion parameters, lubrication oil in deformation zone and work roll diameter were discussed. With the increasing of reduction ratio strip surface roughness Ra(s), Rp(s) and Rv(s) were decreasing along rolling and width direction, the drop value in rolling direction was faster than that in width direction. The roughness and glossiness were obtained under emulsion concentration 3% and 6%, temperature $55^{\circ}C$ and $63^{\circ}C$, roll surface roughness $Ra(r)=0.5{\mu}m$, $Ra(r)=0.7{\mu}m$ and $Ra(r)=1.0{\mu}m$. The glossiness was declined rapidly when the micro defects ratio was above 23%. With the pass number increasing, the micro pit defects were reduced, uneven peak was decreased and gently along rolling direction. The micro pit defects were increased with the roll surface roughness increase. The defects ratio was declined with larger gradient at pass number 1 to 3, but gentle slope at pass number 4 to 5. When work roll diameter was small, bite angle was increasing, lubrication oil in micro pit of deformation zone was decreased, micro defects were decreased, and glossiness value on the surface of strip was increased.