• Journal of Ocean Engineering and Technology
• /
• v.29 no.3
• /
• pp.207-216
• /
• 2015

Amanifold is one of the essential subsea oil and gas production components to simplify the subsea production layout. It collects the production fluid from a couple of wellheads, transfers it to onshore or offshore storage platforms, and even accommodates water and gas injection flowlines. This paper presents the basic design procedure for a manifold frame structure with novel structural verification using in-house unity check codes. Loads and load cases for the design of an SIL 3 class-manifold are established from a survey of relevant industrial codes. The basic design of the manifold frame is developed based on simple load considerations such as the self weights of the manifold frame and pipeline system. In-house software with Eurocode 3 embedded, called INHA-SOLVER, makes it possible to carry out code checks on the yield and buckling unities. This paper finally proves that the new design of the manifold frame structure is effective to resist a permanent and environment load, and the in-house code is also adaptively combined with the commercial finite element code Nastran.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.98-103
• /
• 2007

Likelihood analysis was used for the revision of release probability/frequency in chlorine Injection facilities used in chlorine process. Typically these facilities consist of pressure cylinder, vaporizer, pipeline, measuring equipment and safety equipment. This paper described the incident scenarios considered, likelihood analysis procedure and the selection and application of basic events and for failure rates of mechanical components. Human errors were also considered. The major objective of this paper is to estimate the likelihood of each determined incident scenarios. We estimated failure rates of mechanical components based on likelihood analysis procedure. Human errors were also considered. It was estimated to have $5.73{\times}10^{-5}$ $Cl_2$ leak per year during the major $Cl_2$ handling process. The probability of failure in scrubber system was$4.11{\times}10^{-2}$/demand.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 1998.11a
• /
• pp.20-25
• /
• 1998

In order to support effective decision-making related to inter-sewage planning, this study proposes the spatial distribution method of inter-sewage treatement area using spatial analysis of GIS, Communication system of database, spatial interaction of Gravity model. Evalution Indexs are consist of economic, social/political and environmental condition value which are explained by the analysis of AHP algorithm ,based on opinion of related experts. Network module in Arc/Info is applied in order to find out minimum pipeline root in Miho river watershed, one of the sub-basin of Geum river basin. This value also is utilized for the construction of cost decay function in gravity model.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2017-2022
• /
• 2004

There are multistage preheaters in the power generation plan to improve the thermal efficiency of the plant and to prevent the components from the thermal shock. The energy source of these heaters comes from the extracted two phase fluid of working system. These two-phase fluid can cause the so-called Flow Accelerated Corrosion(FAC) in the extracting piping and the bubble plate of the heater for example, in case of point Beach Nuclear Power Plant and in the Wolsung Nuclear Power Plant. The FAC is due to the mass transport of the thin oxide layer by the convection. FAC is dependent on many parameters such as the operation temperature, void fraction, the fluid velocity and pH of fluid and so on. Therefore, in this paper velocity was calculated by FLUENT code in order to find out the root cause of the wall thinning of the feedwater heaters. It also includeed in the fluid mixing analysis model are around the number 5A feedwater heater shell including the extraction pipeline. To identify the relation between the local velocities and wall thinning, the local velocities according to the analysis results were compared with distribution of the shell wall thicknes by ultrasonic test.

• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.371-377
• /
• 2008

Recently the performance of GPU is increasing much faster compared to GPU and GPU is used for various application programs. In this paper, MPEG-2 Decoder is implemented based on a GPU programming language, CG. The proposed methodology is to perform block rendering with texture data according to video standard with very high parallelism by using the pipeline of GPU which is a stream processing structure. To reduce the data bandwidth between system memory and GPU, local memory is used for graphic card. According to the experiment, the proposed scheme shows performance improvement by more than 2 times compared to CPU based scheme.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1144-1147
• /
• 2017

It was reviewed about the pressure oscillation on the inlet of turbo-pump at the moment of engine startup and shutdown. Specially, This research was performed how much is the effect of PSD(Pogo Suppression Device) about the pressure oscillation on the inlet of turbo-pump at the moment of engine startup and shutdown. For analysis, propellant tank PSD and Engine are modelled with Flowmaster which is the commercial 1D program. As the analysis results, even though the PSD is installed in the pipeline, the pressure drop or rising at the moment of engine startup and shutdown is same compared to the case without PSD. However, it was confirmed that PSD reduces the pressure oscillation of the high frequency band as the original purpose of PSD.

• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.185-190
• /
• 2006

JPEG 2000 is used as an alternative to solve the blocking artifact problem with the existing still image compression JPEG algorithm. However, it has shortcomings such as longer floating point computation time and more complexity in the procedure of enhancing the image compression rate and decompression rate. To compensate for these we implemented with hardware the JPEG 2000 algorithm's filter part which requires a lot of floating point computation. This DWT Filter[1] chip is designed on the basis of Daubechies 9/7 filter[6] and is composed of 3-stage pipeline system to optimize the performance and chip size. Our implemented Filter was 7 times faster than software based Filter in the floating point computation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.3034-3055
• /
• 2014

Wireless Sensor Networks have extensively been utilized for ambient data collection from simple linear structures to dense tiered deployments. Issues related to optimal resource allocation still persist for simplistic deployments including linear and hierarchical networks. In this work, we investigate the case of dimensioning parameters for linear and tiered wireless sensor network deployments with notion of providing extended lifetime and reliable data delivery over extensive infrastructures. We provide a single consolidated reference for selection of intrinsic sensor network parameters like number of required nodes for deployment over specified area, network operational lifetime, data aggregation requirements, energy dissipation concerns and communication channel related signal reliability. The dimensioning parameters have been analyzed in a pipeline monitoring scenario using ZigBee communication platform and subsequently referred with analytical models to ensure the dimensioning process is reflected in real world deployment with minimum resource consumption and best network connectivity. Concerns over data aggregation and routing delay minimization have been discussed with possible solutions. Finally, we propose a node placement strategy based on a dynamic programming model for achieving reliable received signals and consistent application in structural health monitoring with multi hop and long distance connectivity.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.135-142
• /
• 2002

In this paper, we proposed the new structure of the Rake Finger using Walsh Switch, the shared accumulator and the pipeline FWHT algorithm for reducing the signal processing complexity resulting from the increase of the number of data correlators. The number of computational operation in the proposed data correlators is 160 additions when the number of walsh code channels is 4. As a result, it is reduced about 3.2 times other than the number of computational operation of the conventional ones. Also, the result shows that the data processing time of the proposed Rake Finger architecture is 90,496〔ns〕 and the conventional ones is 110,696〔ns〕. It is 18.3% faster than the data processing time of the conventional Rake Finger architecture.

• Computers and Concrete
• /
• v.20 no.6
• /
• pp.671-682
• /
• 2017

In this research, seismic response of pipes is examined by applying nanotechnology and piezoelectric materials. For this purpose, a pipe is considered which is reinforced by carbon nanotubes (CNTs) and covered with a piezoelectric layer. The structure is subjected to the dynamic loads caused by earthquake and the governing equations of the system are derived using mathematical model via cylindrical shell element and Mindlin theory. Navier-Stokes equation is employed to calculate the force due to the fluid in the pipe. Mori-Tanaka approach is used to estimate the equivalent material properties of the nanocomposite and to consider the effect of the CNTs agglomeration on the scismic response of the structure. Moreover, the dynamic displacement of the structure is extracted using harmonic differential quadrature method (HDQM) and Newmark method. The main goal of this research is the analysis of the seismic response using piezoelectric layer and nanotechnology. The results indicate that reinforcing the pipeline by CNTs leads to a reduction in the displacement of the structure during an earthquake. Also the negative voltage applied to the piezoelectric layer reduces the dynamic displacement.