• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1034-1037
• /
• 1999

In this paper, we analyze the inductive interference in conductive material around power transmission line. To compute induced eddy currents as well as electromagnetic fields, finite element method(FEM) is used for numerical calculation. The characteristics of conductive material such as gas pipeline, overhead guide wires, conducting earth and so on are taken account of FEM analysis. This research also shows that mitigation wire reduces amount of eddy current in buried gas pipe line.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.9-11
• /
• 1999

3차원 그래픽 랜더링 파이프라인(3D Graphics Rendering Pipeline)은 크게 지오메트리 프로세싱(Geometry Processing)과 레스터라이제이션(Rasterization)으로 구성되어 있다. 본 논문에서는 래스터라이저와 프레임버퍼사이의 대역폭으로 인한 병목점을 분석하고, 그 한계를 극복해 낼 수 있도록 프로세서 메모리 집적구조를 이용하여 랜더링 시스템을 설계, 성능 분석한다. 프레임버퍼의 집적으로 인한 메모리 대역폭을 이용하기 위해, 각 픽셀 처리에 필요한 로직을 포함하는 SIMD 타입의 픽셀 처리 프로세서가 메모리 어레이와 밀결합(tightly coupled)된다. 제안하는 구조는 래스터라이저 로직과 프레임 버퍼가 단일 칩으로 구성되었고, 텍스쳐 매핑, 범프 매핑, 안티알리아싱, 깊이 버퍼를 지원하며 초당 5백만 이상의 삼각형을 처리할 수 있는 고성능 랜더링 시스템이다.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.150-157
• /
• 2005

Generally, the flow hunting is observed in almost all of the orifice meters but the intensity of the flow hunting is different at each metering system. So, we were getting some Questions as follows; why such a difference occurs and whether it influence to metering error rate or not. To investigate the flow hunting characteristics, we are trying to examine the flow characteristics around the orifice meter when the transient flow or pressure is generated at after the PCV(Pressure Control Valve) by 3D CFD method. And we have compared numerical results with experimental results at M - PCV station in order to clarify the relations with both the metering-pipeline diameter and flow rate. Finally, we can show some major factors influencing to the flow hunting and propose some correcting scheme of the flow hunting equation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1996.05a
• /
• pp.605-610
• /
• 1996

광역상수도의 수도시설 및 관로시설의 적지를 선정하기 위한 시스템에서는 GIS기법을 이용하여 공간정보를 입력하고, 분석하며 적정입지를 선정할 수 있는 기초를 마련하였다. GIS를 이용한 적지선정기법을 방대한 지형정보의 종합적인 관리와 분석능력 및 시각적인 표현능력을 갖추고 있어 광역상수도의 적정노선 결정에 적합하며, 그 이용도가 점차 증가하는 추세이다. 본 연구에서는 포항시를 대상으로 GIS를 이용한 광역상수도의 수도 및 관로시설의 적지선정 시스템에 대한 타당성을 검증하였다. 수치지도는 국가기본도와 주제도중 토지이용도와 도시계획도를 작성하였다. 구축된 지형정보에 관한 기술조건을 만족하는 공간분석항목을 바탕으로 가능대안을 마련하였다. 본 연구의 결과, 기존 수도시설 및 관로시설의 적지선정 방법에 비해 개발된 시스템을 이용할 경우 많은 시간과 비용이 줄었다.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.103-110
• /
• 2005

We present a powerful error control decoder which can be used in all of the commercial DVD systems. The decoder exploits the error information from the modulation decoder in order to increase the error correcting capability. We can identify that the modulation decoder in DVD system can detect errors more than $60\%$ of total errors when burst errors are occurred. In results, fur a decoded block, error correcting capability of the proposed scheme is improved up to $25\%$ more than that of the original error control decoder. In addition, the more the burst error length is increased, the better the decoder performance. Also, a pipeline-balanced RSPC decoder with a low hardware complexity is designed to maximize the throughput. The maximum throughput of the RSPC decoder is 740Mbps@100MHz and the number of gate counts is 20.3K for RS (182, 172, 11) decoder and 30.7K for RS (208, 192, 17) decoder, respectively

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.643-644
• /
• 2006

자기누설탐상시스템은 지하에 매설된 가스관에서 발생되는 부식이나 크랙 또는 기계적 변형을 탐지하기 위한 방법으로 비파괴검사 방법의 하나이다. 가스관은 Nd자석에 의해 착자가 되고, 가스관에 부식이 발생했을 경우 가스관의 단면적이 작아지게 되어 자기누설이 발생하며, 발생된 자기누설을 홀센서로 검출하여 부식의 유무, 크기, 모양 등을 판별하게 된다. 지하매설 배관은 배관의 직경은 같으나 배관의 두께는 다양하게 존재한다. 특히 30inch의 배관에는 배관의 두께가 11.1, 14.3, 17.5 mm 등이 있다. 자기누설탐상시스템은 배관의 단면적 변화를 감지하는 것이기 때문에 배관의 두께에 따라 그 특성이 변화하게 된다. 또한 두께에 따른 결함의 종류에 따라서 검출신호도 변화하게 된다. 따라서 본 논문에서는 배관의 두께 변화에 따른 검출신호를 분석하였으며, 두께 변화의 영향을 적용하여 검출신호를 보정하기 위한 방법을 제시하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.643-649
• /
• 2016

This paper presents a new image cache algorithm for real-time implementation of high-resolution color image warping. The cache memory is divided into four cache memory modules for simultaneous readout of four input image pixels in consideration of the color filter array (CFA) pattern of an image sensor and CFA image warping. In addition, a pipeline structure from the cache memory to an interpolator is shown to guarantee the generation of an output image pixel at each system clock cycle. The proposed image cache algorithm is applied to an FPGA-based real-time color image warping, and experimental results are presented to show the validity of the proposed method.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.21-24
• /
• 2002

This paper presents a new method for the motion detection of vehicles using hierarchical motion estimation and parallel processing. It captures the road image by using a CMOS sensor. It divides the captured image into small blocks and detects the motion of each block by using a block-matching method which is based on a hierarchical motion estimation and parallel processing for the real-time processing. The parallelism is achieved by using the pipeline and the data flow technique. The proposed method has been implemented with an embedded system. Experimental results show that the proposed method detects the motion of vehicles in real-time.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.6
• /
• pp.47-53
• /
• 2009

Ozone is a strong oxidant and a powerful disinfectant. In general, it has been used in drinking water treatment during last 100years. Ozone dissolution features are defined by the two categories of ozone contactors, bubble-diffuser and sidestream ozone contactor. Currently, sidestream-injection systems are gaining in popularity but operating cost might be slightly higher. Sidestream ozone system dissolve ozone into a sidestream flow via an injection setup or in the main process flow stream in some sidestream arrangements. The sidestream flow is subsequently mixed with the main process flow stream, which is directed to a reation tank or pipeline for oxidation and disinfection reactions. The purpose of this study is to suggest optimal operating pressure, to figure out the static-mixer effect and to understand the microbubble characteristics of ozone to improve dissolution efficiency.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.306-312
• /
• 2000

In this paper, the efficient architecture of small Reed-solomon architecture is suggested. Here, 3-stage pipeline is adopted. In decoding, error-location polynomials are obtained by BMA using fast iteration method, and syndrome polynomials, where calculation complexity is required, are obtained by parallel calculation using ROM table, and the roots of error location polynomial are calculated by ROM table using Chein search algorithm. In the suggested decoder, it is confirmed that 3 symbol random errors can be corrected and 124Mbps decoding rate is obtained using 25 Mhz system clock.