• The Korean Journal of Ecology
• /
• v.25 no.6
• /
• pp.389-393
• /
• 2002

Effects of environmental factors on in vitro pine pollen performance were investigated. Pinus densiflora and P. rigida pollen grains collected at Mt. Kwanak, Korea were used. Three environmental factors, such as pollen storage temperature, pollen culture temperature and nutrient condition in medium, were tested. To determine the storage temperature effects on pollen viability, pine pollen was stored at $-70^{\circ}C$, $-12^{\circ}C$, $4^{\circ}C$ and $22^{\circ}C$. Pollen viability was substantially extended at the storage temperatures of $-12^{\circ}C$ and $4^{\circ}C$ for more than 300 days. To elucidate the culture temperature effects on pine pollen germination and tube growth, pollen grains were cultured at the temperatures from $5^{\circ}C$ to $40^{\circ}C$ at $5^{\circ}C$intervals. The germination rate and tube growth were highest at $25^{\circ}C$ and decreased above $30^{\circ}C$. To investigate boron and sucrose effects on pollen tube growth, the pollen was cultured at different sucrose and boric acid concentrations. Germination rate was optimal in germination medium containing 3 or 5$\%$ sucrose with 0.01 $\%$ boric acid. These results indicate that the pine pollen can be stored for considerable length of time without noticeable loss of viability at storage temperature below or near $0^{\circ}C$. Optimal germination medium conditions were established for pine pollen. Therefore, pine pollen can be used for many biological and environmental monitoring researches.

• Journal of Korean Society of Forest Science
• /
• v.94 no.5 s.162
• /
• pp.302-306
• /
• 2005

Litterfall and nutrient inputs were measured in even-aged coniferous plantations (a 31-year-old Pinus rigida and a 31-year-old Larix leptolepis) on a similar site condition in the Forest Practice Research Center, Gyeonggi Province. Litterfall was collected monthly from circular littertraps (collecting area: $0.50m^2$) for three years between April 1997 and February 2000. Average total annual litterfall was significantly higher for pine (5,802 kg/ha/yr) than for larch (4,562 kg/ha/yr) plantations. Needle litter in both plantations accounted for about 63% of total litterfall. Litterfall in the larch was distributed as follows: needle > other leaf > branch > miscellaneous > bark, while it was needle > miscellaneous > other leaf > branch > bark in the pine plantation. There was no temporal variation in needle litter, other leaf and bark during the 3 year study period. The concentrations of all nutrients (N, P, K, Ca, Mg) in needle litter were significantly higher in the larch than in the pine plantations. The annual nutrient concentration of needle litter in the larch varied among the years, whereas no year variation of needle litter was in the pine except for phosphorus (P). Nitrogen (N) and P inputs by needle litter were significantly higher for larch than for pine plantations established on a similar soil. The differences in N and P inputs were attributed to lower nutrient concentration in pine needle litter compared with larch needle litter, not to total needle litter mass. Annual inputs of nutrient in both plantations were not significantly different among years except for K of the larch although there was yearly different in needlefall mass and nutrient concentration during the 3-year observed period. The results indicate that the mechanisms of litterfall and nutrient inputs vary considerably between pine and larch plantations established on a similar site condition.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.505-505
• /
• 2009

The object is to optimize the best condition of organosolv pretreatment process with sulfuric acid as a catalyst. As a material, Pitch pine (Pinus rigida) was ground and sieved through 40-mesh screen, and Celluclast and $\beta$-glucosidase were used as enzymes for enzymatic hydrolysis. Pretreatment processes were carried out in the minibomb, and 20 g of materials with 200 ml of 50% ethanol solution (v/v) with 1% sulfuric acid as a catalyst. Pretreatment temperature was varied from $150^{\circ}C$ to $190^{\circ}C$, and time was varied from 0 to 20 min. Then, residual materials were used for enzymatic hydrolysis. The best conditions were selected by estimating followed enzymatic hydrolysis rate and degradable rates after pretreatment process. The highest value of enzymatic hydrolysis rate was obtained as 55 - 60% at 160 and at $180^{\circ}C$, but the value decreased under more severe conditions. As the residual rates decreased under severe conditions, it infered that the decrease of sugar contents limits enzymatic hydrolysis rates. Combined with enzymatic hydrolysis rate, degradable rates and H-factors, the temperatures at $160^{\circ}C$ for 20 min and at $180^{\circ}C$ for 0 min were concluded as the optimized conditions where have the lowest H-factor value for considering energy input.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.13-19
• /
• 2015

This study was performed to test the combustive properties of Pinus rigida specimens treated with phosphorus (P) and nitrogen (N) additives. Each Pinus rigida specimen was painted three times with 15 wt% P-N additive solutions at room temperature. After drying the treated specimens, the combustion properties were examined using a cone calorimeter (ISO 5660-1). The time to ignition (TTI) for the treated specimens was 90 to 148 s except for the specimen treated with PP/$4NH_4^+$, and the time to flameout (TF) was 556 to 633 s, which was longer than that of virgin plate. While the The specimens treated with P-N additives showed 12.5 to 43.4% higher mean heat release rate ($HRR_{mean}$) and 11.8 to 43.1% higher total heat release (THR) than virgin plate. The effective heat of combustion (EHC) was by 2.9 to 17.5% lower than that of virgin plate. It can thus be concluded that the combustion-retardation properties were partially improved compared to those of virgin plate.

• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.43-46
• /
• 1963

1. Almost complete death of pitch pine seeds resulted when presoaked in 0.5 per cent ethyleneimine solution without neutralization. When neutralized with 1 N HCL, quite high germination percentages were obtained even with 2 per cent solution. 2. When presoaked in 0.25 or 0.50 per cent ethyl methanesulphonate, there was a delay in germination, but the germination per cent rapidly increased from about the 10 th day from sowing. 3. Basing upon the time when the germinative energy of control seeds was reached, the comparative lethal doses (concentrations) among mutagenic chemicals and radiations were investigated (Table 1).

• Journal of the Speleological Society of Korea
• /
• v.56
• /
• pp.15-38
• /
• 1998

Biomass and soil properties of plant communites was investigated in the limestone ares, Tanyang, Ch'ungbuk Province in Korea. Plants was classified in calcicoles and calcifuges within plant communities occurring in the limestone area. Biomass of plant populatins in the limestone area was measured that Stellaria aquatica was the lowest(0.58g/plant), Chrysanthemum boreale was the highest(8.87g/plant) and that Pennisetum alopecuroides, Miscanthus sinensis was 6.67g/plant, 5.76g/plant, respectively. Diameter of breast height among the tree layer communities was investigated that Pinus densiflora was the widest(20cm), Juniperus rigida was the narrowest(6cm) and that Quercus aliena, Populus ${\times}$ tomentiglandulosa was 10cm, 12cm, respectively. The high of density in the tree layer was found out Populus ${\times}$ tomentiglandulosa, Juniperus rigida, Quercus aliena, Pinus densiflora in this order. Dominant species in the study area were Pinus densiflora, Quercus aliena, Juniperus rigida, Quercus dentata in the tree layer, Lespedeza bicolor, Buxus microphylla, Rhus chinensis in the shrub layer, Humulus Japonicus, Erigeron canadensis, Xanthium strumarium, Oenothera odorata Persicaria hypropiper on the riverside, Pennisetum alopecuroides, Vicia amoena, Chrysanthemum boreale on the roadside. Soil properties of the limestone area was investigated around the protrusion of rock in the upper region, around the cave and underlayer accumulated by corrosion in the study area. Lime-chlorosis was observed in the upper region, underlayer and around the cave. It was observed that biota of kum-gul and dungbong-gul was Rhinolophus ferrumequinum korai, Epanerchodus kimi, Antrokoreana gracilipes, Diestrammena japonical. Dominant species were Humulus japonicus, Stellaria aquatica, Hydrocotyle maritima, Phragmites communis, Miscanthus sinensis around the inlet of a kum-gul. It was classified that plants in the study area was 34 order, 53 family, 135 species in all. Calcicoles were 11 order, 16 family, 18 species and calcufuges were 6 order, 8 family, 11 species of them all.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.382-388
• /
• 1988

Improvement of productivity by forest tree breeding work in Korea was estimated for a few important tree species. Progenies of 17 plus trees of red pine (Pines densiflora) outgrew by 57 percentage compared with progenies of unselected trees at age 15. If best three families are selected among the 17, more than double in volume grow-th is expected. The hybrid Pinus rigida ${\times}$ P. taeda showed more than double volume growth compare to P. rigida at a southern plantation at age 15. However, the superiority of the hybrid decreased at northern plantations, mainly because of low coldhardiness of the hybrid. At a northern plantation, the hybrid grew less than the P. rigida on upper hill, while the hybrid grew much better than the P. rigida on flat area. Another hybrid Populus alba ${\times}$ P. glandulosa grew faster than both parents by two to two and half times according to planting sites at age 10. Introduction of Pinus rigida also showed increased volume growth. Volume increase by selection of best five provenances among 45 at age 12 was estimated as 53 percent compare to progenies of plus trees in Korea, Additional 19 percent of volume increase was expected by selection of the best families within the best provenances. Annual production of chestnuts reached about 70,000 M/T by planting resistant clones to chestnut gall wasp (Dryocosmus kuriphilus), which killed almost all susceptible trees. Although polyploid trees and mutants have been produced by colchicine treatments in over 10 tree species, none of them is economically important Remarkable improvement of productivity is expected by biotechnology in future through selection, hybridization, introduction of foreign genes at cell, cell organelle and gene level, and gene transformation. At present, mass propagation of superior planting materials by tissue culture will increase the productivity.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.578-586
• /
• 2013

This study was performed in Pinus rigida and Larix kaempferi plantations which occupy approximately 60% of artificial forest area in Korea. The objective of this study was to know the differences in soil physical and chemical properties between both plantations. Soil physical and chemical properties from published literature and analyzed soil data in national forest in 2010 and 2011 were analyzed by plantation regions and stand age of 5 years unit. Jeollanamdo in Pinus rigida plantations and Gyeongsangbuk-do in Larix kaempferi plantations showed higher soil chemical properties than those of other regions. Soil texture in both plantations was almost loam and sandy loam. Mean soil pH in Pinus rigida and Larix kaempferi plantations were 4.86 and 4.87, respectively and there was no relationship between soil pH and stand age. The mean concentrations of total nitrogen (%) and available phosphorus (mg $kg^{-1}$) were 0.21 and 11.00 for Pinus rigida plantation and 0.28 and 13.32 for Larix kaempferi plantation. In Larix kaempferi plantation, total nitrogen, available phosphorus and organic matter concentrations and C.E.C. were higher than those in Pinus rigida plantation and showed positive relationship with stand age. This positive relationship was also revealed between the exchangeable cations and soil pH. The results of this study provide an informative data in selecting tree species for planting and contribute to the establishing forest management plan for the maintenance of sustainable forests resources.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.70-76
• /
• 2013

Four kinds of new piperazinomethyl-bis-phosphonic acid $M^{n+}$ ($PIPEABPM^{n+}$) were synthesized and their combustive properties of Pinus rigida plates treated with $PIPEABPM^{n+}$ were tested. Pinus rigida specimens were painted in three times with 15 wt% $PIPEABPM^{n+}$solutions at the room temperature. After drying specimen treated with chemicals, com-bustive properties were examined by the cone calorimeter (ISO 5660-1). As a result, the combustion-retardation proper-ties were increased by due to the treated $PIPEABPM^{n+}$ solutions in the virgin pinus rigida. Especially, the specimens treated with $PIPEABPM^{n+}$ showed both the lower peak heat release rate ($HRR_{peak}$) (162.02~145.36) s and total heat release rate (THRR) (73.0~67.4) $MJ/m^2$ than those of virgin piperazinomethyl-bis-phosphonic acid (PIPEABP)-plate. Compared with virgin PIPEABP-plate, the specimens treated with the $PIPEABPM^{n+}$ showed low combustive properties. However the specimens treated with $PIPEABPM^{n+}$ showed both the shorter time to ignition (TTI) (67~23) s and the time to flameout (Tf) (472~433) s than those of virgin PIPEABP-plate by increasing the thermal conductivity.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.1-12
• /
• 2014

This study carried out life cycle assessment for evaluating environmental impacts of timber Arch-Truss bridge by using domestic Pinus rigida Miller glued-laminated timber throughout life cycle such as extraction, manufacturing, transportation, construction, use, dismantlement, transportation of waste, disposal and recycling. The life cycle GHG (GreenHouse Gas) emissions of the target bridge are 192.56 ton $CO_2$ eq. in 50 years. Especially, the life cycle GHG emissions of concrete used in the target bridge are 82.84 ton $CO_2$ eq. which accounts for 53.02% of the GWP (Global Warming Potential) in extraction and manufacturing stages. The target bridge is constructed of $116.57m^3$ of domestic Pinus rigida Miller glued-laminated timber and used timber has stored 104.72 ton $CO_2$. If an effect of carbon storage in timber is applied to the total GHG emissions of the target bridge, the GHG emissions can be reduced by 54.38%. In the case of substitution effect, if domestic Pinus rigida Miller glued-laminated timber replaces steel manufactures used in other bridge which has the same structure and life span as the target bridge, the GHG emissions in extraction and manufacturing stages can be reduced by 10.26% to 23.91%.