• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.23-27
• /
• 1997

Alkali-soluble extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelineii) and Radiata pine(Pinus radiata) The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extracts yield was investigated. Particle sizes affected the alkali-soluble extracts; the finer the particle size, the higher extracts and extract efficiency. High temperature and high liquor ratio were more effective. In the range of 0.25% to 1% NaOH concentration, alkali extracts were increased with the increasing alkali concentration. However, extract yields were leveled off above 0.5% alkali concentration. Extractions with NaHCO3 were almost equivalent to those of NaOH extraction. 1% NaOH and 1% NaHCO3 resulted in the highest yields of alkaline extracts. Extracts from Japanese larch were lower than those from Siberian larch and Radiata pine barks. Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks. Concerning pH of alkaline media during extraction, small increases of the extract yields were resulted at range of pH 7 to pH 9, while a large increases from pH 9.0 to pH 12. This phenomenon is attributed to higher alkalinity.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.29-37
• /
• 1998

Alkali-soluble extracts were prepared from medium-sized barks of Radiata pine(Pinus radiata). There are difficulties in the production of extracts with uniform quality and in the preparation of adhesives with suitable viscosity. Ultrafiltration using an Amicon cell was subjected to fractionate extracts according to molecular sizes in order to overcome the above problem. The filtration efficiency was studied by using thin channel filtration systems. Adhesive manufacturing was also examined. Removal of particles greater than 0.45m from the extracts increased both filtration speed (flux) and yields of solids in the filtrates. Ultrafiltration with PM 10 membrane was very effective to fractionate and concentrate the extracts. Stiasny precipitates from the filtrates obtained by PM 10 membrane were very lower than that(83%) of the retentates. This ultrafiltration method was efficient for obtaining high yield purified phenolic compounds(mainly polyflavanoids) and thus important for preparing wood adhesives from barks. The extracts were shown excessive high viscosities at the concentrations required for adhesive formulation, but this high viscosity and short gelation time was reduced by lowering pH of the extracts and addition of urea. The highest bonding strength of plywoods(340g/$m^2$ of adhesive spreads) was achieved with adhesive formulated by 100parts of mixed alkali extracts and urea(70/30,w/w), 10parts of p-formaldehyde and 3.5parts of wheat flour at pH 6, and by hot pressing at the conditions of 12kg/$cm^2$ at $120^{\circ}C$ for 10 minutes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.12
• /
• pp.1477-1485
• /
• 2011

Dyeability and colorfastness of the blended knits of cotton/rayon (40/60; C/R) and wool/tencel (10/90; W/T) are examined using the natural dyestuff ($Pinux^{TM}$) manufactured from Pinus radiata pine bark extract. In addition, pre-treatments (such as bleaching, mercerization and cationization) are performed to improve dyeability and colorfastness. The $Pinux^{TM}$ powder dyestuffs produced by Pinux Co., Ltd. are used as dyestuffs and their properties are examined for dyeing concentration (0.5-2% (owb)), dyeing time (30-120 minutes) and dyeing temperature (30-$90^{\circ}C$). Dyeability is evaluated with K/S value at 400nm, which is the maximum absorption wavelength for $Pinux^{TM}$. The results show the dyeability of W/T sample containing protein fiber with $Pinux^{TM}$ is superior to all cellulose fiber C/R. A concentration of dyestuff greater than 1.5% (owb), dyeing time 120 minutes and dyeing temperature of $90^{\circ}C$ are the most optimized conditions. It shows that the dyeability of C/R and W/T samples are high in the condition of an acid-dyeing bath and that dyeability highly declined in alkaline bath due to the instability of the proanthocyanidin pigment. After analyzing the effect of bleaching, mercerizing and cationizing (as pre-treatments on dyeability) it was concluded that the dyeability of the C/R sample was enhanced by mercerization but no significant effect by cationization. However, the simultaneous treatment of cationizing and dyeing resulted in far improved dyeability compared to dyeing after cationizing pre-treatment. As for the W/T sample, the effect of cationization was more prominent than the C/R sample. Colorfastness to color changes in the control W/T sample was higher than that of C/R's level 1-2, and it increased to Level 2 when bleaching pre-treatment was given and when a simultaneous cationizing treatment was adopted to the dyeing process. Colorfastness to light in W/T control sample resulted in Level 3 and further increased to an excellent Level of 4 with bleaching and simultaneous cationizing during dyeing process.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.5
• /
• pp.548-557
• /
• 2017

This study investigated the effects of insoluble dietary fibers from pine (Pinus radiata D. Don) inner bark powder (PIBP) on loperamide constipation in rats. Male Sprague-Dawley rats were administered PIBP in their diets at concentrations of 5% and 10% for 4 weeks. Rats were divided in to four groups, normal diet group (Cont), a normal diet and loperamide group (Lop), 5% PIBP experimental diet and loperamide group (Lop+PIBP 5%), and 10% PIBP experimental diet and loperamide group (Lop+PIBP 10%). Constipation was induced by oral administration of loperamide (2 mg/kg, twice per day) for the last three days of the experiment. Food intake, body weight, properties of feces, gastrointestinal transit time, and serum lipid profiles were measured. When compared with the normal diet and loperamide group (Lop), there were increases in fecal pellet number (p<0.05), wet weight (p<0.001), and water content (p<0.001). Positive results were derived from relevant indicators to improve constipation. In addition, the number of fecal pellets in the colon was not significant, and decreased as PIBP content increased. PIBP had a concentration-dependent effect on reduction of total cholesterol, LDL-cholesterol, and triglycerides and elevation of HDL-cholesterol. These results indicate that PIBP may effectively prevent constipation.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.4
• /
• pp.311-322
• /
• 2017

This study examined the traditional edible basis and ingredients of Song-gi used for Pyeon of Jong-ga ancestral ritual food. Through an investigation of references, a case study, and ingredient analysis for traditional edible basis of Song-gi, the nutritional value and availability as food material were reviewed. Among the 4 kinds of pine trees from 4,705 types of edible materials usable as food listed in the ${\ll}$Korea Food Standards Codex${\gg}$, 'Pinus radiata D. Don', in which the husk is acknowledged as an edible food, was applied in this study. This study processed the Song-gi following the method of jong-ga and divided into pine inner bark (PIB) and pine inner bark powder (PIBP) to analyze the general composition and dietary fiber. The main composition of PIB was carbohydrate, in which the content was 88.7% per 100 g. The content of dietary fiber was 73.7% per 100 g and the insoluble dietary fiber reached 92.3% in total dietary fiber. In conclusion, the edibility of Song-gi, which has a considerable amount of insoluble dietary fiber caused constipation because it absorbed the moisture in the intestine due to the lack of nutrients but may be developed as a functional food that helps the digestive activation of the intestine and improve the health of the intestine if taken with balanced nutrition.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.507-518
• /
• 1982

Biogeochemistry of a 34-year-old red pine plantation on a Typic Udipsamment was investigated in the central sand plains of Wisconsin Biomass and net primary production were $106Mg\;ha^{-1}$ and $11.0Mg\;ha^{-1}y^{-1}$ respectively. Concentrations of elements in the vegetation were greatest in the 2- to 3-year-old needles, followed by current needles, current twigs, bole bark, live branches, dead branches, bolewood production, and bolewood. For a given tree component (excluding the current twigs), elemental concentrations were greatest in the upper one- third and least in the lower one- third of the tree. Total elements in the vegetation are ranked: N($222kg\;ha^{-1}$), Ca(217), K (85), Mg(38), S(31), and p. The soil contained from 60 to 89% of the readily available P, K, Ca, Mg, and S in the ecosystem. Whereas precipitation was the major source of N and S, weathering supplied the bulk of the Ca, Mg, P, and K. Output of a given element by leaching was less than $7kg\;ha^{-1}y^{-1}$ except for S which was $12kg\;ha^{-1}y^{-1}$ Whereas throughfall returned the greatest amounts of N, K, and S to the forest floor, litterfall accounted for the greatest returns of Ca, Mg, and P. Because of foliar leaching, net loading of all elements studied in the throughfall exceeded that of the precipitation. Ammonium in net precipitation was reduced by a factor of three within the upper 7.5cm due to uptake by fine roots.