• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.666-674
• /
• 2014

In this study, we investigated mechanical properties of Korean softwoods after applying thermal compression. Density of compressed woods was notably increased with thermal compression. In case of 50% compression set, density of Korean pine (Pinus koraiensis), Japanese red pine (P. densiflora), and Larch (Larix kaempferi) wood was increased by 71%, 74%, and 76%, respectively, when compared to the control group. The strength of woods was increased and quality of the woods became homogeneous with an increases in the compression set. On the 50% compression set, the compressive strength, bending strength, and hardness of Korean pine wood was increased by 76%, 83%, and 55%, respectively compared to the control group. Longitudinal compressive strengths of Japanese red pine wood increased by 69%, 130%, and 76%, respectively and those of Larch wood increased by 77%, 120%, and 44%, respectively. In thermal compression wood, mechanical properties of Larch wood was the highest, while those of Korean pine wood were the lowest. However, Japanese red pine wood showed the highest in the increase rate of mechanical properties after the thermal compression.

• Journal of the Korea Furniture Society
• /
• v.22 no.4
• /
• pp.270-277
• /
• 2011

This study aims to find new solutions to the problem of utilization of materials and techniques represented in the development of modern lighting design. LED is an important component in modern lighting design and pine tree is one of the most popular domestic wood in furniture design in Korea. In this study, design is developed into various types of furniture such as a table, a chest, and a lighting, by researching manufacturing process and examining the use of slicing pine tree. The technique of slicing pine tree is a simple linear arrangement that was traditionally used in wooden furniture in Lee dynasty, with an emphasis on repetitive rhythm. The slicing technology is used to expand the usage of domestic pine tree. The beauty of natural wood is expressed with the transmission of light by applying this technique to the lighting design. It also brings new communication in between artificial lighting and natural wood combining this traditional technique and LED lighting in design. Finally, this study suggests particular value through the convergence of analog and digital by using the traditional wooden technique that keeps natural wood prints and new digital technology by using LED lighting. More discussions and research about this subject are expected continuously through this study.

• 한국균학회소식:학술대회논문집
• /
• 2006.10a
• /
• pp.13-15
• /
• 2006

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.71-73
• /
• 2008

Different biosolid fuel (wood pellet) properties between trunk and root of pine (Pinus densiflora) biomass were investigated. Trunk has more organic solvent extracts and Klason lignin content which has higher heating values than root biomass component. In root biomass, polysaccharides content was higher than trunk biomass. Based on Higher Heating Value (HHD) analysis and ash content, trunk biomass showed better solid fuel characteristics than root biomass. But pine root biomass had lower HHD than trunk biomass, its HHD values were higher than other hardwood or annual plant lignocellulosic biomass.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.34-42
• /
• 1998

Three hardwood (ash, alder and black locust) and three softwood (Japanese red pine, radiata pine and Western hemlock) specimens were dried in microwave(MlW) oven and their drying rates were obtained. Their specific permeabilities were also measured by using a modified liquid permeability measuring device. The correlation between the M/W drying rates and permeabilities of six species were statistically analyzed. It was revealed that within a species there is a logarithmic relationship between the M/W drying rates and average moisture contents and that among species there is a linear relationship between the M/W maximum drying rates and the average specific permeabilities. A exception was Western hemlock, which was of low permeability and of high drying rate. A Me-time equation, which showed a good agreement with the actual data, was derived. Thus using this equation the moisture contents of wood and the drying end points of M/W drying could be predicted. Infrared images of the thermal distribution in wood were illustrated.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.19-26
• /
• 1991

This study was carried out to investigate the solid wood bending properties of red pine(Pinus densiflora S. et Z.)naturally grown in Korea by boiling treatment The specimens were green and their dimension was $15\times15\times350mm$. The optimum conditions for solid wood bending processing of pine lumber are shown in Table 6 and the minimum solid bending radius was 240 mm in boiling treatment. The effects of knot on the degradation of bending processing properties were very severe and the failures of diagonal and torn grained wood were 20% and 30% respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.896-906
• /
• 2020

Wood deterioration experiments were carried out for 6 months in an intertidal zone of South Korea to monitor the changes in the chemical properties of two types of species, Korean red pine and sawtooth oak. The results of FT-IR spectra and XRD patterns have shown that the chemical properties of the wood did not change significantly during the 6-month burial period. However, the brightness of the surface decreased after burial; the value of the sawtooth oak sample was lower than that of the Korean red pine sample owing to an accumulation of inorganic compounds in cell lumen as observed by ICP analysis. Among the inorganic compounds, sodium and sulfur concentrations increased significantly over the burial period compared with the control. Further, the maximum moisture content decreased from 199% to 136% in the Korean red pine and 62% to 60% for the sawtooth oak. Nevertheless, the major chemical composition of both the wood species did not change significantly during the 6-month burial period, whereas, the crystallinity decreased with an increasing burial period owing to an accumulation of inorganic compounds in the lumen.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.221-233
• /
• 2013

This study was performed to identify the effect of end-coating around pith of heavy timbers of Red pine and Korean pine on high temperature and low humidity drying characteristics. Total drying times were 268 hours, and ranges of final moisture content was investigated that Red Pine 9.2% to 10.8% MC for square and round timber, in case of Korean Pine 15.0% to 22.0% MC for square timber, 12.8% to 20.4% MC for round timber. Moisture content distribution of Red Pine was a uniform, but part of high moisture content was found in Korean Pine. In case of Korean pine, the surface checks were occurred more severe than in case of Red pine, and end-coating treatment were investigated to be ineffective on surface check. The internal checks were only formed on the two timbers. The value of the case hardenings was investigated that the ranges 3.7% to 9.1% for Red pine. In case of Korean pine, on the other hand, the case hardenings presence a few as 20.9% to 35.8%.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.1
• /
• pp.23-37
• /
• 2023

One type of biomass that has promising potential for bio pellet production is spent coffee grounds (SCGs). However, previous studies have shown that SCGs in bio pellets cause a lot of smoke. Therefore, they need to be mixed with a material that has a higher calorific value to produce better quality pellets. One material that can be used is pine wood because it has a natural resin content that can increase the calorific value. The aim of this study was to examine the quality of bio pellets produced with SCGs and pine wood charcoal at different particle sizes. The charcoal was ground using either a hammer mill (HM) or a ball mill (BM). Pine wood charcoal was mixed with SCGs at ratios of SCGs to pine wood charcoal of 4:6 and 6:4 by weight, respectively, and the adhesive used a tapioca with a composition ratio 5% of the raw material. The bio pellets were produced using a manual pellet press. The quality of the bio pellets was assessed based on Indonesian National Standard (SNI) 8021-2014, and the physical observations include flame length, burning rate, and compressive strength. The average water content, ash content, and calorific value of the bio pellets were in accordance with SNI 8021-2014, but the density and ash content values were below the standard values. The BM variation of bio pellets had a higher compressive strength than the HM variation, and the 4:6 BM variation had the longest burning time compared with 4:6 HM.