• Annual Conference of KIPS
• /
• 2008.11a
• /
• pp.1477-1480
• /
• 2008

주민번호대체수단은 주민번호를 대체하기 위한 본인확인정보로서, 5 개의 민간기업이 운영하는 민간 i-PIN과 행정안전부가 운영하는 공공 i-PIN이 서비스를 제공하고 있다. 하지만 주민번호대체수단이 더욱 활성화되기 위해서는 기존에 제시된 보안성, 편의성 문제를 해결해야 한다. 본 논문은 신원 선택기를 추가하여, i-PIN의 프로토콜을 변경하지 않는 범위 이내에서 i-PIN의 단점으로 지적되는 로그인 번거로움, i-PIN 사이트 기억 문제, 피싱을 비롯한 보안 문제를 해결하는 방안을 제시하였다. 제안하는 방법은 사용자가 가입한 i-PIN 제공자에 접근하는 단계, i-PIN 제공자에 id 와 비밀번호를 입력하는 단계를 없애고, 신원 선택기를 통해 사용할 신원 정보를 선택하는 것만으로 처리되도록 하였다. 본 기술은 ETRI 에서 개발중인 전자 ID 지갑 솔루션을 통해 구현되었으며, 해당 서비스는 2009 년 중에 민간 i-PIN 제공자를 통해 시범 도입될 예정이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.322-330
• /
• 2014

New effective techniques to repair "small" design errors in integrated circuits are presented. As semiconductor chip complexity increases and the design period becomes tight, errors frequently remain in a fabricated chip making revisions required. Full mask revision significantly increases the cost and time-to-market. However, since many "small" errors can be repaired by modifying several connections among the circuit blocks and spare cells, errors can frequently be repaired by revising metal layers. Metal only revision takes significantly less time and involves less cost when compared to full mask revision, since mask revision costs multi-million dollars while metal revision costs tens of thousand dollars. In our research, new techniques are developed to further reduce the number of metal layers to be revised. Specifically, we partition the circuit blocks with higher error probabilities and extend the terminals of the signals crossing the partition boundaries to the preselected metal repair layers. Our partitioning and pin extension to repair layers can significantly improve the repairability by revising only the metal repair layers. Since pin extension may increase delay slightly, this method can be used for non-timing-critical parts of circuits. Experimental results by using academia and industrial circuits show that the revision of the two metal layers can repair many "small" errors at low-cost and with short revision time. On the average, when 11.64% of the spare cell area and 24.72% of the extended pins are added to the original circuits, 83.74% of the single errors (and 72.22% of the double errors) can be corrected by using two metal revision. We also suggest methods to use our repair techniques with normal commercial vender tools.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1079-1087
• /
• 2021

NTP-ERSN is a package developed for solving the multigroup form of the discrete ordinates, characteristics and collision probability of the Boltzmann transport equation in one-dimensional cartesian geometry, by combining pin cells. In this work, C5G7 MOX benchmark is used to verify the accuracy and efficiency of NTP-ERSN package, by treating reactor core problems without spatial homogenization. This benchmark requires solutions in the form of normalized pin powers as well as the vectors and the eigenvalue. All NTP-ERSN simulations are carried out with appropriate spatial and angular approximations. A good agreement between NTP-ERSN results with those obtained with OpenMC calculation code for seven energy groups. In addition, our studies about angular and mesh refinements are carried out to produce better quality solution. Moreover, NTP-ERSN GUI has also been updated and adapted to python 3 programming language.

• Journal of Mushroom
• /
• v.9 no.2
• /
• pp.69-73
• /
• 2011

We have researched on methods which can reduce fruit-body malformations of king oyster mushroom(Pleurotus eryngii). We collected many pathogens from diseased fruit-body or malformated fruit-body and identified with chemicobiological test and microscope. The factors of fruit-body malformations and increment of contamination during the pin-heading induction time were researched with ventilation amounts in growing room. When the pathogens having high pathogenicity were inoculated in spawn running bottle and at pin-heading induction time, symptom appeared or not appeared in according to air ventilation amounts in growing room. During the pin-heading induction time, humidity degree in growing room have kept of high level and air ventilation amounts were so little that fruit-body malformations ratio was high. But, even though pathogens were inoculated at the surface of bottle factitiously, if air ventilation amounts were enough, fruit-body malformation ratio was low.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.430-439
• /
• 2009

Posterior Cruciate Ligament (PCL) plays an important role in knee extension. Rotational instability due to injured PCL can be restored by various PCL reconstruction methods. In this study, the initial lengthening affected by fixation device and location was demonstrated, and furthermore, the slippage and the relationship between lengthening ratio and slippage ratio in the calcaneus and soft tissue fixation methods was newly suggested. Eight specimens of proximal tibia and Achilles tendon grafts were harvested from four cadavers and divided into four groups in regard to the four different types of transtibial fixation techniques. The cyclic load ranged from 50 N to 250 N applied to each graft fixed to proximal tibia in 55 degrees. The initial lengthening ratio to the total elongation has been approximately constant regardless of the fixation methods. The soft tissue fixation method with an interference screw showed about 56.4% slippage ratio to the total elongation and the same method with a double cross-pin presented about 45.4% slippage ratio. The soft tissue fixation method with an interference screw demonstrated approximately 2 mm less total elongation and about 13% more slippage than lengthening because of poor fixation compared to the same method with a double cross-pin.

• Korean journal of food and cookery science
• /
• v.30 no.3
• /
• pp.262-270
• /
• 2014

This study was conducted in order to investigate the properties of bread making and quality improvement when wheat flour is replaced with whole waxy sorghum flour. Sorghum flour, which was prepared with two types of milling methods of pin mill and ultra fine pulverization, was used at different levels ranging from 10, 20 and 30%, respectively. The pasting properties of peak viscosity, setback viscosity and pasting temperature of the composite flour containing pin-milled sorghum flour were higher than those of ultra fine pulverized sorghum flour. The volumes of sorghum bread were lower than that of wheat bread; moreover, they gradually decreased with increasing amounts of sorghum flour, which has inferior dough properties and therefore collapses in the oven. The use of vital gluten (12% based on sorghum flour weight) and emulsifier (SSL; sodium stearoyl lactylate) increased the extensibility and resistance to the extension of the dough, thereby improving its rheological properties. Thus, the oven spring of bread containing sorghum was improved, demonstrating as loaf volume increase up to 15%. However, in the case of breads containing 30% sorghum flour, the loaf volumes were still unacceptably low. Therefore, the formula and the bread making process were further modified as follows: An increase of vital gluten ($12%{\rightarrow}18%$) and shortening ($3%{\rightarrow}6%$), a decrease of mixing time and dough fermentation temperature, and the addition of sorghum flour after gluten development during mixing. The above modifications resulted in the improvement of sorghum bread quality. Therefore, we suggest that pin-milled sorghum flour is more appropriate than ultra fine pulverized sorghum flour for making bread.

• Journal of Mushroom
• /
• v.4 no.4
• /
• pp.135-143
• /
• 2006

We have investigated cultural circumstance and given condition of king oyster mushroom(Pleurotus eryngii) growing farmer. We collected many pathogens from King oyster mushroom growing farmer and identified with chemicobiological test and microscope. Most of investigated farmers neglected their's growing room cleaning and washing, after harvesting At pin-heading induction time, humidity degree in growing room was kept of high level and Air ventilation volume was so little that fruit-body formation ratio was low. The collected pathogens were twenty eight strains and identified with Pseudomonas sp., Trichoderma sp. mostly. During the spawn running time and pin-heading induction time, contamination by Trichoderma sp. occurred mostly, but during the fruit-body growing time, contamination by Pseudomonas sp., Erwinia sp. etc, occurred.

• Journal of Mushroom
• /
• v.10 no.4
• /
• pp.160-166
• /
• 2012

The effects of fixed and variable temperatures on fruiting body formation and characters of mushrooms were investigated with normal and thinning treatment plots. In fixed temperature, as temperature was lower, period of harvest was longer as well as days for pinheading in the both of normal and thinning plots. Harvest rate were 91.0, 90.3, and 95.8% at $13^{\circ}C$, $17^{\circ}C$, and $15^{\circ}C$. In the thinning plot, qualities of mushrooms were 7.5, 8.1, and 7.7, and yields were 86.0, 105.9, 104.0g at 13, 15, and $17^{\circ}C$ respectively. In variable temperature with a variable temperature plot, condition II($17^{\circ}C$ for pin-heading(before reverting, 7-8 days)${\rightarrow}16^{\circ}C$ for extending primodia(before thinning, 4-5 days)${\rightarrow}15^{\circ}C$ for extending (after thinning)) was the best for yield which was better than other conditions by 17.4% and 4.0% and quality of mushroom was highest 8.1 among all conditions.

• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2019

Agrocybe cylindracea was cultured in a bag, in which sawdust culture medium (1 kg) is put in a plastic bag (PE), with poplar sawdust, rice bran, wheat bran, and dried bean curd refuse in the ratio of 70:10:10:10 (v/v). 2% of the culture medium was inoculated with the liquid starter of Agrocybe cylindracea, and this was incubated at $25^{\circ}C$. After incubation, the A. cylindracea was further cultured by cutting the top vinyl portion of the bag down to the level of the culture medium surface of the first inoculation part. The cut culture medium was placed in a growth room at $25^{\circ}C$, and pin-heading was induced under light irradiation at 99% humidity and 1,000 ppm $CO_$ level for 3days. When the grow the environment was controlled at 95% humidity and $21^{\circ}C$, the bending of the stem was less as compared to that when the cap of the bag had been removed. The number of effective fruiting bodies per bag increased by 140% (28.8), the quantity per bag increased by 29.5%, and 148.5 g A. cylindracea could be potentially harvested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.539-546
• /
• 1997

In this paper, we proposed a new mehtod to analyze the performance degradation by timing jitters in the APD (avalanche photodiode) receivers of intensity modulation/direct detection digital optical communication systems where raised cosine pulse-shaping filters are used to reduce the effect of noise while minimizing intersymbol interferences. The proposed analytical method is an extension of an analytical method we have already developed for pin diode receivers, and incorporates the effects of APD's multiplication factor and resulting shot noise. Using the proposed analytical method, we derive an approximated power penalty due to timing jitters based on an assumption of Gaussian distribution for timing jitters, and compare with that of the conventional analytical method. The results obtained from the proposed analytical method show that conventional analytical methods underestimate the influence of timing jitters on the reciver performance. The results also show that APD's multiplication factor which optimizes receiver sensitivity is smaller than that obtained by the conventional analytical method.