• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.114-122
• /
• 2017

N-nitrosamines can be produced in the process of heating, processing, storage and packaging. Migration specifications for N-nitrosamines exist only for rubber baby bottle nipples, which are regulated by the Ministry of Food and Drug Safety (MFDS). There is no regulation for other food contact substances (FCS) and studies on N-nitrosamines migration from FCS are rather limited. A pilot study showed an increase in N-nitrosamines contents when cooking instant noodles. Thus, the migration from the packaging was suspected and it was necessary to monitor the migration of N-nitrosamines from food packaging materials and to examine the change in N-nitrosamines contents when cooking instant foods. Three N-nitrosamines, NDMA (N-nitrosodimethtlamine), NDEA (N-nitrosodiethylamine), NDBA (N-nitrosodibutylamine), were analyzed in migration test solutions from plastics such as polyethylene, polypropylene and polystyrene, papers and aluminium containers. In all test solutions, N-nitrosamines were detected less than method quantitation limits (MQLs). Food samples were also investigated to ensure that there is no effect from food contact substances when cooking instant foods. In retort sauces such as curry, black soybean sauce and tomato sauce, NDMA concentration was ranged from 0.54 to $3.81{\mu}g/kg$, but there were no significant differences between unheated and heated samples. However, the NDMA contents were significantly increased in most of the instant noodle samples tested when cooked (p < 0.05). No effects from the food contact substances or cooking water was observed. Only when the seasoning powder and noodles were cooked together was NDMA detected. Individual components (noodle, seasoning powder or dried vegetable) or other combinations such as noodles and dried vegetables did not generate N-nitrosamines. Therefore, it is speculated that NDMA may be formed from the precursors in noodles and seasoning powders when they are solubilized in a medium of water.

• The KIPS Transactions:PartD
• /
• v.16D no.1
• /
• pp.133-138
• /
• 2009

This paper introduces a pilot CDMA network-based wireless lap time measurement system set up on a ski slope of Yongpyong Ski Resort. The wireless lap time measurement system is one output of U-Sports Project of Gangwon Province, which is intendended for promoting local strategic business and preparation for hosting 2018 Winter Olympic Games at Pyeongchang. A pair of laser sensors is installed at the entry and exit points of a section requiring lap time measurement on a ski slope. Each laser sensor is connected to a sensor node via wire so that the sensor node can detect the time when a skier enters or exits the section. Also each sensor node is connected to a CDMA network via a modem and receives a standard time from a NTP server. Each node executes the NTP algorithm to synchronize its local time to the received server time. As a result of the time synchronization, the sensor nodes maintain its local time within a resolution of at least 10 miliseconds and transmit the time of detection to a central control center. While the wireless lap time measurement system introduced in the paper does not need expensive measurement equipment, the system allows the central control center to provide lap time records in a more convenient manner compared to conventional manual lap time measuremnt methods.

• Physical Therapy Korea
• /
• v.26 no.3
• /
• pp.57-66
• /
• 2019

Background: Visual and somatosensory integration processing is needed to reduce pusher behavior (PB) and improve postural control in hemiplegic patients with acute stroke. Objects: This study aimed to investigate the effects of game-based postural vertical training (GPVT) on PB, postural control, and activity daily living (ADL) in acute stroke patients. Methods: Fourteen participants with acute stroke (<2 months post-stroke) who had PB according to the Burke lateropulsion scale (BLS) (score>2) were randomly divided into the GPVT group ($n_1=7$) and conventional postural vertical training (CPVT) group ($n_2=7$). The GPVT group performed game-based postural vertical training using a whole-body tilt apparatus. while the CPVT group performed conventional postural vertical training to reduce PB (30 minutes/session, 2 times/day, 5 days/week for 3 consecutive weeks). The BLS was evaluated to assess the severity of PB. And each subject's postural control ability and ADL level were assessed using the postural assessment scale for stroke (PASS), balance posture ratio (BPR), and Korean-modified Barthel index (K-MBI). Outcomes were measured pre- and post-intervention. Results: Comparison of the pre- and post-intervention assessment results showed that both interventions led to the following significant changes: decreased severity of PB scores and increased PASS, BPR, and K-MBI scores (p<.05). In particular, statistical analysis between the two groups, the BLS score was significantly decreased in the GPVT group (p<.05). And PASS, BPR, and K-MBI scores were significantly improved in the GPVT group than in the CPVT group (p<.01, respectively). Conclusion: This study demonstrated that GPVT lessened PB severity and improved postural control ability and ADL levels in acute stroke patients.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.5
• /
• pp.121-131
• /
• 2015

Village-concentrated agricultural regional development projects that aim for increased profits are now being aimed at core agricultural and fishing areas. These agricultural and fishing stimulus projects aim to not only increase the net profit of local citizens but also improve their living conditions. As the industry itself has changed, local rural areas have also changed in various ways. One such aspect is the emergence of rural-urban complexes known as "rurban" areas. These naturally occurring rurban regions are created by a combination of complex urban infrastructure while maintaining the insulated rural communities that agricultural areas are usually so readily identified by. "Jeongeupsi Naejangsnagdong", the target of this research, also specifies the unaltered surrounding natural environment of rural areas while at the same time containing complex central living areas typically found in urban areas. This research suggests that the direction of residents' participation in community-level rurban projects could solve the problems found in existing top-down government development projects. This research also suggests rurban area activation plans to improve living conditions through analysis of both local rurban agricultural characteristics and citizen demands. In order to encourage citizen autonomy and self-governing attitudes, citizen-strengthening workshop programs are proposed, such as citizen workshops or pilot activities. This research was carried out by target area analysis, rudimentary planning, development direction setting, detailed project planning, and finally project processing. This procedure established three goals, which are walking environment improvement, community infrastructure establishment, and good living environment establishments, based on actual site research and citizen demands. This research suggests plans to activate community groups that were already established and reflect citizen needs as the main avenues for local businesses. This research is predicted to promote more active and successful growth through autonomy in stimulating these increasingly emerging rurban agricultural regions.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.15-24
• /
• 2018

Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

• The Journal of Korean Academy of Sensory Integration
• /
• v.11 no.1
• /
• pp.11-27
• /
• 2013

Objective : This is a descriptive study using a program review collaborative group program by special educator and occupational therapist for supporting children's school tasks, and it is designed to explore how changed school performance skills and to analyze how applied intervention methods including sensory integrative approach. Methods : Participants were 6 male elementary students(5 = 1st grade, 1 = 2nd grade). Pilot program had reviewed and its results used as base for planning main program. Main program was implemented by collaborative process with teacher and occupational therapist for 1 year. School AMPS was used to assess school task participants, and informal motor and process skill observation was used to assess self-help activities. Description of records by professions about intervention strategies through assessments was described as qualitative way. Japanese sensory inventory was used by parents. Results : Through the collaborative process, assessing children, planning and modifying program, establishing intervention strategies were implemented. Self-help abilities in group program were increased much more independently. School task abilities were increased slightly but skills changed irregularly and unexpectedly and their reasons became considered more complex from sensory processing reasons to social and emotional reasons. Conclusion : Sensory integration had benefits for primary group program and more complex intervention strategies became to emerge demands for person- environment-task challenges. Collaborative practice with teacher and occupational therapist was supplement and synergic effect for children and group dynamics. More objective and comprehensive methods for measure collaboration and group effect would be needed in further study.

• Sleep Medicine and Psychophysiology
• /
• v.26 no.1
• /
• pp.44-48
• /
• 2019

Objectives: Insomnia is one of the most prevalent sleep disorders. Recent studies suggest that cognitive and physical arousal play an important role in the generation of primary insomnia. Studies have also shown that information processing disorders due to cortical hyperactivity might interfere with normal sleep onset and sleep continuity. Therefore, focusing on central nervous system arousal and normalizing the information process have become current topics of interest. It has been well known that neurofeedback can reduce the brain hyperarousal by modulating patients' brain waves during a sequence of behavior therapy. The purpose of this study was to investigate effects of neurofeedback therapy on electroencephalography (EEG) characteristics in patients with primary insomnia. Methods: Thirteen subjects who met the criteria for an insomnia diagnosis and 14 control subjects who were matched on sex and age were included. Neurofeedback and sham treatments were performed in a random order for 30 minutes, respectively. EEG spectral power analyses were performed to quantify effects of the neurofeedback therapy on brain wave forms. Results: In patients with primary insomnia, relative spectral theta and sigma power during a therapeutic neurofeedback session were significantly lower than during a sham session ($13.9{\pm}2.6$ vs. $12.2{\pm}3.8$ and $3.6{\pm}0.9$ vs. $3.2{\pm}1.0$ in %, respectively; p < 0.05). There were no statistically significant changes in other EEG spectral bands. Conclusion: For the first time in Korea, EEG spectral power in the theta band was found to increase when a neurofeedback session was applied to patients with insomnia. This outcome might provide some insight into new interventions for improving sleep onset. However, the treatment response of insomniacs was not precisely evaluated due to limitations of the current pilot study, which requires follow-up studies with larger samples in the future.