• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.102-112
• /
• 1997

This paper describes the method that can construct kinematically admissible velocity fields for forging of gear-like components which have tooth shape around the cylinder. The kinematically admissible velo- city fields for the various gear-like components, involute spur gear, trapezoidal spline, square spline, ser- ration and trochoidal gear, were constructed by pilling up the velocity components according to the shape of tooth and billet. The billets, of hollow and solid, were Al 2218 and 2024. To verify the method, the analyses and experiments were carried out and compared with each other. For analyses, the half pitches of com- ponents were divided into several deformation regions based on their tooth profile. A neutral surface was used to represent the inner flow of material during forging. Its location varied with the energy optimazation and its contour varied with the number of teeth. In experiment, the contour of material filling up the tooth zone is hyperbolic curve caused by the frictional drag on the interface of die-wall/workpiece but, in the analysis, it is an arc which retains the same contour during all forging operation.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.629-634
• /
• 2012

Knitted fabric using acrylic/wool blended yarn (A/W) is increasingly used in the knit industry; subsequently, research on knitted fabric using A/W has increased. This study presents an scientific database from evaluating physical properties of $1{\times}1$ rib stitch using A/W. In this study,$1{\times}1$ rib stitch using A/W were made at various knitting tensions (dial no. 2-6) and the number (4-6) of ply yarn. The physical properties of $1{\times}1$ rib stitch using A/W were measured and analyzed. The density was in the range 5.5-6.4 wales/cm and 4.0-5.6 courses/cm, respectively. The density increased when less plying yarns and more knitting tension were added during knitting. The thickness was in the range of 1.592-2.362 mm and the tensile strength was in the range 32.75-53.63 Kgf/mm. The burst strength was in the range 107.8-139.2 $N/cm^2$. Thickness, tensile strength, and burst strength increased as the number of ply yarn and the knitting tension increased. The elongation and the recovery extension rate were in the range 102.29-112.13% and 96.4-97.7%, respectively. The heat retention rate was in the range 59.3-65.1%. There was no difference of the elongation and the recovery extension rate and the heat retention rate by the knitting tension and the number of the ply yarn. The permeability was in the range 170.5-396.3 $cm^3/cm^2/sec$. Air permeability decreased as the number of ply yarn and the knitting tension increased. The pilling properties were excellent for all $1{\times}1$ rib stitches.

• Korean Journal of Environment and Ecology
• /
• v.11 no.1
• /
• pp.126-132
• /
• 1997

Nanji-do is an island in Seoul, the area is 272ha, and in which gad was piled up waste discharged from Seoul metropolitan for 15 years(form March 1978 to March 1993). The volume of waste is 92, 000, 000m$^{2}$. The actual vegetation area of Nanji-do is 191ha, and the area of woody plant is 31ha. The rest area is covered by herbaceaus plant. In actual vegetation area of woody plant, Robinia pseudoacacia community and Salix pseudo-lasiogyne community are 83%. The soil pH is alkaline, though general soil pH is acid in Seoul. There is no relation with soil condition and actual vegetation. The result of this study, actual vegetation of Nanji-do don't help the establishment of vegetation restoration after soil stabilization construction. And so following a countermeasure is proposed. 1) Selection of adequate species by an experiment of planting pioneer species, native species, and dietary species 2) Establishment of an adequate planting plan and development of slope stabilization method by planting of native species 3) Establishment of a restoration plan of animal ecosystem by survey for animal ecosystem

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.519-526
• /
• 2010

The construction site for $\bigcirc\bigcirc$ transformer substation was located at a mountain valley. In order to prepare the site, the valley was first filled with crushed rock debris up to 63m. Since the main concern of this project is to minimize differential settlement of the foundation of transformer facilities, dynamic compaction was performed every 7m followed by reinforcement with EMP(Ez-Mud Piling). The EMP is one of bored piling methods, in which a hole is bored by means of air percussion and maintain by injecting Ez-Mud. Then a PHC pile (Pretensioned spun High strength Concrete pile) is embedded and finalized with a hammer. In this study, bearing capacities and long term behavior of a pile installed by EMP were investigated. To achieve these objectives, a series of tests such as static and dynamic load tests were conducted. In addition, a construction quality control standard was proposed based on the test results.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.261-268
• /
• 2012

The purpose of this study is to investigate problems of design, fitness, suitability for movement, and wearing comfort of jumper for Korean military tank drivers through analysis of actual wearing condition by questionnaire and field evaluation and to provide basic data for developing its improved design. The survey was done for 477 military tank drivers and evaluation was performed using thermal manikin to measure insulation. The overall satisfaction for design of jumper for military tank driver was over 3.5(likert scale). The overall satisfaction for fitness of jumper for military tank driver was also over 3.5. The satisfactions for material was between 2.39 and 3.13 and the satisfaction for pilling property was the lowest, followed by static property and shape stability after laundering. The satisfactions for movement suitability were standing(3.81), sitting(3,38), raising hand(forward: 2.90, sideward: 3.01), respectively. In insulation evaluation of jumper for military tank drivers and outwears(jacket, jumper), the insulation of jumper for military tank drivers was lower than outwear(jumper) and same with outwear(jacket). The insulation in dynamic and still condition(without wind) of jumper for military tank driver was 0.37clo and 0.31clo, respectively. Its decreation rate in dynamic condition comparing to still condition was 59% which was lower than jacket(0.73clo) and jumper(1.15clo).

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1020-1029
• /
• 2015

This paper investigated the wearing performance of knitted fabrics made of air vortex yarns using PTT/tencel/cotton fibres in comparison with ring and compact yarns for emotional garment. Wicking property of knitted fabric made of MVS yarns was worse than those by ring and compact yarns, however, drying property of knitted fabric made of MVS yarns was better than those by ring and compact yarns, which was explained as more water vapor transport due to larger openness between fibres in the MVS yarns than those in the ring and compact yarns. Thermal conductivity of knitted fabric made of MVS was lower than those of ring and compact yarns and maximum heat flow(Q_max) at the transient state of MVS knitted fabric was lower than those of ring and compact yarns, which may be attributed to MVS yarn structure that has parallel fibres in the core part of the yarn and fasciated fibre bundles on the sheath part with roughness on the yarn surface. However, pilling of MVS knitted fabric was better than those by ring and compact yarns, which was caused by less and shorter hairy fibres protruded from MVS yarn surface than those of ring and compact yarns. It was observed that tactile hand of MVS yarn knitted fabrics was stiffer than those of ring and compact yarns knitted fabrics. It was explained by low extensibility and compressibility and high bending and shear rigidities of the MVS yarn knitted fabrics, which resulted in bad wearing performance of MVS knitted fabric.

• The Research Journal of the Costume Culture
• /
• v.26 no.3
• /
• pp.450-470
• /
• 2018

This study examined the risk components and risk types perceived in the context of purchasing decisions of paper fashion products. This study also identified the levels of perceived risk by consumers and the differences between age groups in risk perception. First, qualitative data were collected through a focus group interview with 7 Korean females in their 20s to 50s. The interviewees were presented with two types of paper materials (undyed and dyed Jumchi-Hanji) and products (bags and wallets) made with the papers. The interviewees mentioned 11 risk components which were classified into five types of risks: performance (easily torn/lack of durableness, lint/pilling/wear-out, lack of water-resistant, no washability, and deformation and discoloration over time), social-psychological (old and traditional image), aesthetic (lack of design diversity, unsatisfactory appearance due to repair), financial (expensive price, lack of usability in daily life) and time/convenience (difficulty in handling) risks. Based on the results of the interview, a measurement for evaluating the risk perception of paper fashion products was developed. Second, quantitative data were collected from 64 Korean women in their 20s to 50s using the measurement. Respondents who were presented with the paper materials and the products perceived the performance risk more strongly than the social-psychological risk and aesthetic risk. In addition, differences between age groups were found: younger respondents perceived performance risk and social-psychological risk more strongly than older respondents, but older respondents perceived financial risk more than younger respondents. Based on this study, strategies for the risk reduction of paper fashion products were proposed.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.81-91
• /
• 1998

Studied on the changes of physical properties according to frequency of washing of sample such as cotton, ramie, wool, cotton knit, T/C. The results are as follows :1. The tensile strength in cotton, wool, and T/C was not changed by 5 times washing but in cotten knit was increased because hang-down phenomenon. 2.The crease resistance of cellulose fiber was decreased by repeated washing. In the case of wool, That was decreased considerably because of decreasing of elasticity and increasing of density caused by shrinking after washing. 3.The abrasion strength of wool was increased with increase in frequency of washing because of thickness caused by shrinking. 4.By repeated washing, the pills was generated in all of the samples and quantity of pills was increased with increase in frequency of washing, the pills was generated in all of the samples and quantity of pills was increased with increased in frequency of washing. Specially, in the case of cotton knit and wool, the pilling was remarkable. 5.The physical properties of dry cleaned wool was superior than that of wet cleaned wool.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.192-199
• /
• 1991

To manufacture a good organic fertilizer through rapid composting process, cow dung was mixed with bulking materials such as rice straws, shredded bark, wood chips, and saw dust. The mixing ratio of the cow dung and bulking material was two to one on volume basis and moisture content was adjusted to 60 to 70 percent, C/N ratio 25 to 30 and aeration forced with suction during the aerated pile fermentation. Aerated pile was established outdoors and curing pile was in vinylhouse and the experiment was conducted for 3 years from '88 to '90. After pilling, temperature in aerated pile was reached to the maximum level at 7 to 9 days and the temperatures of cow dung + shredded bark, cow dung + wood chips, and cow dung + rice straws were higher than that of cow dung, and cow dung + saw dust. Total carbon, and C/N ratio in aerated pile fermentation period were increased in the middle stage and then they were decreased with the process of days, and nutrient contents in curing pile period had the same tendency as in the aerated pile.

• Science of Emotion and Sensibility
• /
• v.10 no.2
• /
• pp.177-186
• /
• 2007

The purposes of this study were to investigate consumer's needs for golf wear and to suggest a direction of product development and planning, based on the analysis of golfer's needs. The subjects used for the research were 150 male and female golfers who were in golf practice fields. The data were analyzed by frequency analysis, factor analysis, ANOVA, t-test and Duncan test. In summary, the results of this study were as followers; Dimensions of consumer's needs for golf wear were extracted from factor analysis as following properties; fashion/design property, textile property, hygiene property, body-shaped property. The most important consumer's need for golf wear was "wearing comfort" and second one was "moisture absorbency" Respondents evaluated that wearing comfort, stretchability, tactile, size of golf wear were very important but price, pilling, shrinkage or color-fading after laundry of golf wear were relatively less important. The evaluation of consumer's needs for golf wear according to demographic information had significant difference. The female golfers were found to consider that fiber characteristics, easy-to-laundry, wrinkle resistance, stretchability, sewing quality were relatively more important, when compared with the male golfers. Also, There were significant differences on the evaluation of consumer's needs for golf wear on fiber characteristics, stretchability, brand name between age groups.