• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.407-426
• /
• 2008

The bentonite slurry has been used as the stabilize suspension for wet process bored pile construction in Thailand. The bentonite suspension has benefit on filtration in the sand layer, but it creates thick cake film along pile shaft and loose sedimentation at pile toe. The base grouting technique was widely used to rectify the soft base or loose sedimentation problem of bored pile. The base grouting technique was not increased only end bearing capacity, but was also more increase in skin friction capacity of the bored piles. The comprehensive researches on base grouting was carried out by installing PVC casing inside the shaft to allow the drilling through the pile base in order to collect the soil sample below the pile tip. The polymer based slurry recently was used to replace the bentonite slurry to overcome the thick cake film along pile shaft as well as loose sedimentation at pile toe. The extent research on polymer slurry by physical model was performed to verify the real behavior of polymer. The appropriate mixing ratio of polymer was proposed. The design skin friction coefficient, $\beta$ and end bearing coefficient, Nq, for sand layer base on fully instrumented tested pile were proposed. The application on remedial of the lose capacity bored pile with large displacement in Bangladesh was proposed and discussed.

• Coupled systems mechanics
• /
• 제1권1호
• /
• pp.1-7
• /
• 2012

The problem of laterally loaded piles is particularly a complex soil-structure interaction problem. The flexural stresses developed due to the combined action of axial load and bending moment must be evaluated in a realistic and rational manner for safe and economical design of pile foundation. The paper reports the finite element analysis of pile groups. For this purpose simplified models along the lines similar to that suggested by Desai et al. (1981) are used for idealizing various elements of the foundation system. The pile is idealized one dimensional beam element, pile cap as two dimensional plate element and the soil as independent closely spaced linearly elastic springs. The analysis takes into consideration the effect of interaction between pile cap and soil underlying it. The pile group is considered to have been embedded in cohesive soil. The parametric study is carried out to examine the effect of pile spacing, pile diameter, number of piles and arrangement of pile on the responses of pile group. The responses considered include the displacement at top of pile group and bending moment in piles. The results obtained using the simplified approach of the F.E. analysis are further compared with the results of the complete 3-D F.E. analysis published earlier and fair agreement is observed in the either result.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.287-294
• /
• 2019

The finite element method (FEM) is widely used to evaluate the seismic performance of pile-supported buildings. However, there are problems associated with modeling the pile end resistance using the FEM, such as the dependence on the mesh size. This paper proposes a new method of modeling around the pile tip to avoid the mesh size effect in two-dimensional (2D) analyses. Specifically, we consider the area of influence around the pile tip as an artificial constraint on the behavior of the soil. We explain the problems with existing methods of modeling the pile tip. We then conduct a three-dimensional (3D) analysis of a pile in various soil conditions to evaluate the area of influence of the soil around the pile tip. The analysis results show that the normalized area of influence extends approximately 2.5 times the diameter of the pile below the pile tip. Finally, we propose a new method for modeling pile foundations with artificial constraints on the nodal points within the area of influence. The proposed model is expected to be useful in the practical seismic design of pile-supported buildings via a 2D analysis.

• 국제초고층학회논문집
• /
• 제4권4호
• /
• pp.271-281
• /
• 2015

This paper introduces detailed three-dimensional numerical analyses on a bored pile foundation for a high-rise building. A static load test was performed on a test pile and a numerical model of a single pile, which was calibrated by comparing it with the test result. The detailed numerical analysis was then conducted on the entire high-rise building foundation. Further study focused on soil pressures under the base slab of a piled raft foundation. Total seven cases with different pile numbers and raft-soil contact conditions were investigated. The design criteria of a foundation, especially settlement requirement were satisfied even for the cases with fewer piles under considerable soil pressure beneath the base slab. The bending moment for the structural design of the base slab was reduced by incorporating soil pressures beneath the base slab along with bored piles. Through the comparative studies, it was found that a more efficient design can be achieved by considering the soil pressure beneath the slab.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.309-323
• /
• 2016

As the forefront of structural design method, capacity spectrum method can be applied conveniently, and through this method, deformation demand of structure can be considered. However, there is no research for the seismic application in the structure of sheet pile retaining wall to report. Therefore, focusing on laterally loaded stabilizing sheet pile wall, which belongs to flexible cantilever retaining structure and meets the applying requirement of capacity spectrum method from seismic design of building structure, this paper studied an approach of seismic design of sheet pile wall based on capacity spectrum method. In the procedure, the interaction between soil and structure was simplified, and through Pushover analysis, seismic fortification standard was well associated with performance of retaining structure. In addition, by comparing the result of nonlinear time history analysis, it suggests that this approach is applicable.

• 한국지반공학회논문집
• /
• 제35권9호
• /
• pp.29-36
• /
• 2019

직경 500mm 및 직경 600mm PHC말뚝 A종의 파괴 압축하중($P_n$)은 각각 7.7MN 및 10.6MN으로 계산할 수 있었다. 직경 500mm 및 직경 600mm 매입 PHC말뚝 A종에 대한 압축정재하시험 시 말뚝 두부에 재하된 최대 압축하중은 6.9MN 및 8.8MN으로 측정할 수 있었으며 따라서 이 측정하중은 각각 $P_n$의 90% 및 83% 수준이었다. 직경 500mm 및 직경 600mm PHC말뚝 A종의 장기허용압축하중($P_a$)은 각각 1.7MN 및 2.3MN이었다. 모든 사례 매입 PHC말뚝의 양방향재하시험 자료로부터 계산된 지반의 허용지지력은 국내 현행 설계에서 사용하고 있는 극한지지력 산정공식으로 계산한 지반의 허용지지력보다 높은 수준으로 계산되었다. 따라서 매입 PHC말뚝의 설계에서 사용하는 극한지지력 산정공식은 매입 PHC말뚝의 실제 지지력 거동을 모사할 수 있도록 개선하여야 할 것으로 판단되었다.

• 한국방재학회 논문집
• /
• 제1권3호
• /
• pp.103-110
• /
• 2001

흙의 비선형 변형 특성과 말뚝의 강성을 동시에 고려한 즉, 말뚝과 지반의 상호 거동을 고려한 말뚝 기초 구조의 해석을 수행하였다. 특히 비균질, 비탄성 재료인 철근 콘크리트 말뚝의 단면응력과 균열 발생등의 원인으로 변화되는 말뚝의 휨강성을 구조해석에 적용하였다. 흙의 비선형 특성치는 토질 종류에 따라 흙의 탄성한계를 넘어 항복을 고려한 P-Y curve를 이용한 방법 및 N치에 의한 내부마찰각 산정에 따른 방법으로 얻었다. 본 연구 결과는 말뚝의 강성변화에 의해 교량상부구조의 변위 및 일부단면력이 커짐을 알 수 있었다. 따라서, 최적설계를 위한 정확한 구조해석에서 말뚝의 강성변화에 따른 적합한 구속조건을 고려할 필요가 있음을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제19권7호
• /
• pp.5-11
• /
• 2018

Instead of a single pile, group piles are usually used for the pile foundation. If the earthquake occurs in the ground where group piles are installed, dynamic behavior of group piles are affected not only by interaction of piles and the ground movement but also by the pile cap. However, in Korea, the pile cap influence is not taken account into the design of group piles. Research on dynamic behavior of group piles has been performed only to verify interaction of piles and the ground and has not considered the pile cap as a factor. In this research, 1g shaking table model tests were performed to verify the thickness of the pile cap affects dynamic behavior of group piles that were installed in the ground where the earthquake would occur. The test results show that, as thickness of the pile cap increased, acceleration and horizontal displacement of the pile cap decreasd while vertical displacement of the pile cap increased. The results also showed that, among the group files tested, acceleration, horizontal displacement, and vertical displacement of the bearing pile are smaller than those of the friction pile.

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.33-43
• /
• 2011

본 연구에서는 등가 지반면 스프링 모델을 적용한 단일 현장타설말뚝의 간편해석(기둥-말뚝의 상호작용을 고려한 분리해석)을 수행하였다. 이 때 지반조건, 하중, 말뚝직경 등의 영향인자에 따라 검증하였으며, 단일 현장타설말뚝에 적용된 철근량을 분석하여 말뚝의 최소 철근비 적용성을 평가하였다. 본 연구결과, 기존 기둥과 말뚝을 단일부재로 모델링하는 일체해석과 기둥-말뚝의 상호작용을 고려한 분리해석의 결과에는 서로 차이가 없었으며, 이를 통해 가상,고정점을 통한 해석법은 단일 현장타설말뚝의 정확한 거동파악이 어려움을 알 수 있었다. 또한 재료의 비선형성을 고려한 해석결과, 말뚝부에서 발생하는 휨모멘트는 말뚝재료의 균열모멘트 이내에서 모두 발생하였으며, 수평변위도 허용 수평변위 기준을 만족하는 것으로 나타났다. 따라서 단일 현장타설말뚝의 말뚝부에는 최소철큰비 기준인 0.4% 철근량만을 배근하여도 안정성이 확보되는 것을 알 수 있었으며, 기둥-말뚝의 상호작용을 고려한 분리해석은 상하부 일체해석으로 가는 중간단계의 비교적 정확하고 경제적인 설계법임을 알 수 있었다.

• 한국지반공학회지:지반
• /
• 제8권2호
• /
• pp.21-30
• /
• 1992

말뚝의 주면마찰력은 전체 지지력중 상당한 하중을 지지할 수 있으나 실제 설계시에는 무시되는 경우가 많이 있다. 주면마찰력을 설계에 반영할 경우에도 계산결과의 신뢰도는 매우 낮은 것이 현실이다. 국내의 사정은, 설계 자료로 활용할 수 있는 것은 표준관입시험 결과뿐인 경우가 대부분으로 빈곤하며 특히 국내에 많은 화강암, 편마암의 풍화잔류토에 관해서는 설계자료가 극히 희박해 외국에 비해 열악하다. 최근에 국내에서 개발된 간편한 말뚝재하시험(simple pile loading test: SPLT)의 사용은 선단지지력과 주면마찰력의 별도 측정이 가능하도록 하였다. 본 연구에서는 풍화잔류토 지반에서의 SPLT 결과를 분석하여 N값에 의한 새로운 설계관계식을 제안하였다.