• 펄프종이기술
• /
• 제44권3호
• /
• pp.1-8
• /
• 2012

The effects of several factors including organic pigment blending and calending conditions on the surface and optical properties of coated paper were investigated. When clay and calcium carbonate are blended in the ratio of 7 to 3, highest smoothness and relative sediment volume were obtained. When organic pigments were added to the mixture of clay and calcium carbonate, the relative sediment volume did not changed significantly. However, when organic pigments were added to calcium carbonate, sheet gloss and smoothness were improved, and showed the better results than that obtained from the mixture of organic pigment and clay. When organic pigment is blended with clay, the particles of organic pigment are buried in the packing structure of coating layer. However, the particle shape of calcium carbonate is quite different from that of clay, and the aspect ratio of calcium carbonate is similar to that of organic pigment. Thus organic pigment particles are not buried and improved effectively the physical characteristics of coating layer. When the hollow sphere pigment was blended, opacity and sheet gloss were improved significantly. Even though the coating color applied was reduced, the similar level of opacity was maintained. Also, if particle size and void volume are increased, gloss is improved, because coating layer is easily transformed in calendering. Therefore, even though lower pressure was applied during calendering, the smoothness of surface of coating layer was improved, and the decrease of void volume in coating layer was reduced, and the quality of coated sheet can be improved.

• Journal of Forest and Environmental Science
• /
• 제18권1호
• /
• pp.97-105
• /
• 2001

The main objective of this study was to investigate effects of pigment mixed with different ratio on the double coated paper. Mineral pigments such as clay and ground calcium carbonate(GCC) as well as hollow sphere plastic pigment were used to evaluate the physical, optical properties and printabilities of double coated paper. The physical properties such as gloss and smoothness, and the printability(ink gloss) of double coated paper were measured to evaluate the effects of the bottom layer on improving the properties of top layer. The data indicated that the usage of hollow sphere plastic pigment for the bottom layer coating improved the surface properties of double coated paper, and that ink gloss was significantly influenced by the structure of bottom layer even when hollow sphere plastic pigment was used for the bottom layer coating.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.47-53
• /
• 2004

In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.

• 보존과학연구
• /
• 통권21호
• /
• pp.119-143
• /
• 2000

The pigments composition and structure of the mural painting at Pongjongsa Kuknakjon is discussed. The structure of inner wall is consisited of Paint layer, Ground divided two layers of yellow and white pigments, Support. In case of outer wall, it is consisted of Paint layer, Ground divided three layers of yellow and green pigments, a layer mixed green pigments and paint layer, Support. As a result of compositon analysis of mural painting pigments at Pongjongsa Kuknakjon using Micro-area X-ray diffraction system, the red pigment on inner wall is consisted of Heamatite($Fe_2O_3$), Magnetite($Fe_3O_4$)of deep black pigment, and Chalcocite($Cu_2S$) of light black pigment. The white pigment on outer wall is consisted of Anglesite($PbSO_4$) and Atacamite($Cu_2CI(OH)_3$) of green pigment. We found out that natural pigments painted in the mural painting at Pongjongsa Kuknakjon has kept up its own color for a long time due to using the natural pigment not to artificial synthetic pigment.

• 한국미생물·생명공학회지
• /
• 제7권1호
• /
• pp.31-36
• /
• 1979

배양된 색소액으로부터 조색소의 생산, 물리적 성질, 생리적 성질을 조사하여 다음과 같은 결론을 얻었다. 1) 유기용매를 이용하여 Petroleum ether에서 황색계 조색소, 60％ ethanol에서 적색계 조색소를 얻었으며 배양액 100ml당 적색조색소 400mg, 황색조색소가 80 mg 정 도 생산되었다. 2) 배양된 색소액의 흡광도곡선은 495∼500nm에서 최대 흡광도를 나타내었고 균사체를 파괴하여 추출한 균체내 색소의 최대 흡광도는 394∼403nm이었다. 3) Thin layer Chromatography에 의한 적색계 색소는 5가지 색소물질로 구성되어 있었고 황색계 색소는 1가지였으며 pH 안정성은 pH 3에서 pH 9까지 비교적 안정하였다. 4) 추출한 색소액의 용혈반응시험은 음성이었고 적색조색소의 항균력시험은 감수성이 없었으며 급성 시험의 결과에서는 독성이 없었다.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.61-67
• /
• 2016

This study was carried out in order to investigate the effect of pigment properties in a pre-coating layer on the characteristics of a top-coating layer and the print mottle of the coated paper. Five different pigments were applied for this study as raw materials for the pre-coating layer. The properties and print mottle of the coated paper samples were evaluated according to the coating color formulation. Type of pigments appliied in a pre-coating layer was one of the most important factor to control the properties of pre and top coating layer. Surface properties of pre and top coated paper were improved by blending GCC which had smaller particle size, with clay. Properties of a top-coating layer was affected by the pigment properties used in the pre-coating layer. It was found that print mottle of coated paper can be improved by replacing part of GCC with smaller particle size GCC or clay in pre-coating layer.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.35-54
• /
• 1992

Direct electrostatic coating method is simple, low cost and environmentally useful method. We are investigated on the coating of carrier transfer polymer layer on the carrier generate inorganic pigment layer using direct electrostatic coating method. The sample was obtained electrostatic deposite layer by fusing and calendering on the copper phthalocyanine. we could be found several polymer thin film shows good bond properties between film and pigment layer.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.82-90
• /
• 1999

송광사 삼세불화는 조성년도가 확실하지 않지만 남아있는 서기(書記)와 재질 분석을 통해 19세기초에 제작된 것으로 추정 할 수 있었다. 그리고 공시불화의 보존처리를 위해 안료층과 바탕층, 지지층을 구성하고 있는 재질을 분석하고 이에 적합한 지지층인 배첩지를 초지하여 그 적합성을 시험한 바 다음과 같은 결론을 얻었다. 1. 삼세불화의 단면구조는 안료층과 명주로 된 바탕층 그리고 한지(韓紙)로 이루어진 지지층으로 구성되어 있어 19세기 당시의 불화는 기본적으로 안료층, 바탕층, 지지층으로 구성되어 있음을 알 수 있었다. 또한 안료층과 바탕층의 접착은 아교를 사용하였고 지지층의 sheet 배첩은 호료(糊料)를 사용했음을 알 수 있었다. 2. 삼세불화의 지지층은 5겹으로 구성되어 있고 두 종류의 종이가 사용되었는데 바탕층과 접해 있는 1~2층은 순수한 닥섬유로 제조한 한지(韓紙)를 사용하였고 나머지 3개 층은 폐마섬유(廢麻纖維)에 닥섬유가 혼합된 종이를 사용하였다. 더 많은 자료가 확보되어야만 단언할 수 있지만 재질을 통해 당시의 상황을 파악해 보면 19세기 당시의 사회는 경제적으로 어려움을 겪고 있었고 더욱이 사찰 제지업은 피폐해져 운영이 어려워 후면에 사용한 배첩지는 질이 떨어지는 폐마를 이용 했을 것으로 추측되었다. 3. 본 재료의 바탕층과 지지층간의 인장력을 고려하여 새롭게 제조해 보수용으로 사용한 바 본 공시재료의 보수용 배첩지로서 적합했음을 알 수 있었다.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.53-61
• /
• 2001

This study was carried out to evaluate the effect of coating pigments on the printability by investigating the pore structure of casting layer such as the number, size and distribution of pores and the pore rate. The coating structure was mainly determined by the interaction between pigment and binder. It means that the structure of pores was chiefly affected by the shape and size distribution of pigments and their packing rate. The physical properties of pore have close relationships with ink set-off, the speed of ink penetration and printing gloss. The results suggested that the rate and number of pores were greatly affected by the particle size distribution and shape of pigments. The rate of pore increased with the reduction of particle size distribution of pigments. Calcite was effective to improve greatly the printability of coated paper.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.62-73
• /
• 1998

The aim of this work was to investigate the effects of pigment composition on the calendering response and structure of the coated paper. Calendering response of the coated paper was determined from the gloss values of the uncalendered and calendered coated papers, and the relationship between gloss and coating structure was discussed. The surface and cross section of the coating layer was observed using a scanning electron microscope to examine the coating structure. Coating layers were hardened in epoxy resin and polished with carbimet paper disc for preparing SEM samples. Maximum calendering response was obtained for the coated paper prepared from 80pph of clay and 20pph of ground calcium carbonate (GCC) as pigments. Photomicrographs of the surface and cross section of the coating layer show that clay tends to form dense coating structure, while GCC tends to form bulky coating layer.