• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1159-1162
• /
• 2006

본 논문에서는 Adaptive Frequency Hopping (AFH) 알고리즘을 사용하는 블루투스로 이루어진 피코넷이 Wireless Local Area Network (WLAN) 과 공존할 때 피코넷(Piconet) 패킷(Packet)간의 충돌 (Interference) 과 통합 처리량을 분석하였다. 동일한 주파수 대역의 Unlicensed ISM(Industrial, Scientific, Medical) Band를 사용하는 WLAN은 22MHz대역을 사용하기 때문에 AFH 알고리즘을 사용하는 블루투스와 공존할 경우 WLAN의 개수에 따라 홉 수가 달라진다. 본 논문에서는 멀티플 슬롯(Multiple-slot) 패킷을 사용하는 피코넷 클러스터(Piconet Cluster)의 패킷 충돌 모델을 가지고 AFH 알고리즘에 의해 서로 다른 홉(hop) 수를 갖게 된 피코넷의 패킷 충돌 확률과 통합 처리량을 전체 피코넷의 수를 증가시키면서 분석하였다.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.414-417
• /
• 2003

In this paper, a performance of Bluetooth piconet is analyzed. Average cycle time, average waiting time, average transfer delay and average queue length are used for measure of performance (MOP). Simple round robin (RR) scheduling policy with exhaustive service is used for the analysis. Packet loss is considered because of noise environments of wireless communication. Numerical results have been presented. Simulation is performed to validate the correctness of analysis.y and its maximum operating frequency is 800MHz.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.4
• /
• pp.1-7
• /
• 2013

This paper presents the AMR (Automatic Meter Reading) system using the binary CDMA (Code Division Multiple Access) radio technology. The binary CDMA is the new radio technology in domestic research. Main implementation topics includes the binary CDMA remote meter reading system, the wireless piconet configuration for the wireless automatic meter reading, and the transmission scheduling for sending and receiving data. Also, the wireless packet data encryption is very important topics for the wireless automatic meter reading. The proposed AMR system is implemented as a pilot project in Jeju and Gangwon. It can be seen that the wireless remote reading using the binary CDMA wireless technology can be applied to the AMR system.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.399-403
• /
• 2009

In IEEE 802.15.1 (Bluetooth) Ad-hoc networks, the frequency is resolved by the specific part of the digits of the Device clock and the Bluetooth address of the Master device in a given piconet. The piconet performs a fast frequency hopping scheme over 79 carriers of 1-MHz bandwidth. Since there is no coordination between different piconets, packet collisions may occur if two piconets are located near one another. In this paper, we proposed a software/hardware co-design of an adaptive frequency decision mechanism so that more than two different kinds of wireless devices can stay connected without frequency collision. Suggested method was implemented with C program and HDL (Hardware Description Language) and automatically synthesized and laid out. The adaptive frequency hopping circuit was implemented in a prototype and showed its operation at 24MHz correctly.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.239-244
• /
• 2012

In this paper, we first introduce our own binary CDMA technology. Then we propose a wireless distribution automation system using the binary CDMA technology. The major research items are the binary CDMA distribution automation system, piconet configuration for remote control and monitoring, scheduling for the transmission and reception of data, and ways of applying encryption to protect wireless packet. To verify the possibility of applying wireless transmission to the distribution automation system, we experiment the implemented system in terms of the transmission rate by applying it to a real-world environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.3-11
• /
• 2017

Research and development are being conducted to apply low-power Bluetooth (BLE) technology to IoT (Internet of Things) applications. The characteristic of this application environment is that many piconets can operate in the same space. Therefore, interference between homogeneous networks is likely to occur. In the BLE data channel, adaptive frequency hopping (AFH) scheme is used among the 37 frequency channels, and the master and the slave communicate while changing the carrier frequency. If there are multiple BLE piconets in the same space, there is a risk of frequency collision and packet errors will occur. In this paper, we analyze the packet collision probability due to cochannel interference in multiple asynchronous BLE piconet environments. Specifically, we analyzed packet collision probability according to the number of concurrently operating BLE piconets with the ratio of connection interval to connection event length as the main parameters. The analysis result can be used to set connection event related parameters for a desired packet collision probability according to the number of users having BLE devices in a given space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.469-476
• /
• 2008

In this paper we analyze the packet interference probability and the aggregated throughput of a WPAN in which a number of Bluetooth piconets share the ISM band with WLANS. Using an Adaptive Frequency Hopping algorithm, when the AFH is employed, the number of hops available to the Bluetooth piconets varies depending on the number of independent WLANs within the piconet's radio range. Using a packet collision model in a piconet cluster, we give an analysis of the packet interference probability and the aggregated throughput as a function of the available hops for the AFH algorithm. We also present an analytical model of packet interference with multi-path fading channel in a cluster of piconets. Through analysis, we obtain the packet collision probability and aggregated throughput assuming capture effect. Numerical examples are given to demonstrate the effect of various Parameters such as capture ratio, Rice factor and cluster size on the system performance.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.401-401
• /
• 2004

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.3
• /
• pp.19-25
• /
• 2002

Bluetooth, in radio network environment, is a small local radio communication that is available with low expense and little power use. It is specified for the wireless connect in a small area between Network Excess Point, portable devices such as mobile phones. PDAs and portable PCs, and other per peripheral equipment. Bluetooth is consisted of a master and a piconet having seven slaves in a maximum and finally has a scatternet gathering lot of piconet. The thesis tries to design the most effective structure of a scatternet by the number of nodes and the type of scatternet such as linear and ring for its mechanism. then the performance evaluation is realized through the Bluehoc simulator based on the NS. Finally the most appropriate radio network environment is made by the comparison and analysis of the characteristics of liner and ring scatternets.