• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.397-400
• /
• 2000

The demands of high data transfer rate and high recording density in optical disk memory device are being increased. In order to achieve high performance, lever actuator for optical disk is proposed. Firstly, the role of lever and structure are discussed and the flexure hinge is introduced to enhance the precise movement. Next is to present the magnetic circuit structure and concept design for the lever actuator. Finally, the dynamic modeling of the lever actuator is found and the analysis results are shown. Consequently, the lever actuator shows the possibility as a pickup actuator for the next generation optical disk.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.377.2-377
• /
• 2002

In optical disk drives (ODD), the demands of high data density and high speed have been increasing rapidly to achieve high data capacity and data transfer rate The use of short wavelength laser and high track following performance are needed to raise data density and data rate. For high-performance actuator, the improvement of linearity and acceleration become more important. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.479-483
• /
• 2006

As high-definition television(HDTV) broadcasting were generalized, there have been many researches and developments about large storage capacity and fast data transfer rate in optical disk drives(ODD). Pickup actuators must have high flexible mode frequencies and gain margins. Flexible modes are caused by the flexibility of moving parts in the actuator and a servo bandwidth is limited by them. As a result, the system becomes unstable for high-speed operations in high density reading and recording. In this paper, we suggest improved modeling method that considers the bonding layer. And, flexible mode frequency of actuator is improved by Design of Experiment of lens holder. Magnet circuit is designed considering the relation with moving part. Through improving yoke design, the magnetic flux is changed and DC tilt is reduced. Consequently, we designed actuator which has high flexible mode frequency and gain margins.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1010-1014
• /
• 2002

A new type actuator has been designed and investigated to overcome thermal problems in slim optical disc drive which is adopted in mobile storage devices. Recently, in optical storage device technical trends, the size of optical disc drives is slimmer to adopt notebook computer and the spindle rotate velocity is faster to achieve high transfer rate and the power of actuator is higher to perform tilting, etc. However, these trends of optical disc drives tend to raise the environment temperature of drives, actuator power and parts temperature. Moreover, it is more difficult to remove the heat inside a drive and the temperature of an actuator increases and drive slims. As a result, increase of surface temperature of actuator body caused that second resonance of an actuator moves down to a lower frequency band and the performance of optical parts also deteriorates. Especially objective lens, coil and magnet of the actuator parts are easily damaged. To manage these thermal problems, in this paper an actuator with a hybrid blade, which is composed of vectra which has low thermal conductivity and magnesium which has high thermal conductivity, has been suggested and verified. Despite the high temperature environment, the proposed actuator showed good dynamic performance.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.240-244
• /
• 2006

As high-definition television(HDTV) broadcasting becoming more generalized, there have been many researches and developments about a large storage capacity and a fast data transfer rate in optical disk drives (ODD). Pickup actuators must have high flexible mode frequencies and large gain margins. Flexible modes are caused by the flexibility of moving parts in the actuator and a servo bandwidth is limited by them. As a result, the system becomes unstable for high-speed operations in high density reading and recording. In this paper, we suggest improved modeling method in considering of the bonding layer. And, the flexible mode frequency of actuator is improved by Design of Experiments of lens holder. The Magnet circuit is designed considering the relation with the moving part. Through improving the yoke design, the magnetic flux is changed and the DC tilt is reduced. Consequently, we designed an actuator which has a high flexible mode frequency and a large gain margins.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권1호
• /
• pp.19-22
• /
• 2002

Rotary mountages are the best mountages among all the mountages that are used in sericultural areas. But to use this mountage more space, separate mounting hall & requires more labour to pickup the matured worms. to over come these problems, self mounting method is adopted to save the time Er labour, But the mounting rate is generally less. To accelerate the mounting rate different repellents viz; saw dust, phytoecdysone, 1% cresol with paddy husk, lime, kaolin, gormalin chaff were used in the present study. The results indicated that highest number of larvae climbed the mountage in 1% cresol with paddy husk, followed by phytoecdysone and lime. It is observed that the use of repellents at wandering stage accilerates mounting rate and did not affect the quality of the cocoons and reeling characters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.782-787
• /
• 2002

In optical disk drives (ODD), the demands of high data density and high speed have been increasing rapidly to achieve high data capacity and data transfer rate. The short wavelength laser, High NA objective lens, and high track following performance are needed to raise data density and data rate. For high-performance actuator, the improvement of linearity and acceleration become more important. Also, 3-axis actuator for active tilt compensation is introduced to overcome the decrease in disk tilt tolerance which is induced by short wavelength laser. In this paper, a hybrid type 3-axis actuator is presented and a new yoke structure, which can reduce the interaction between yoke and moving magnet, is designed to keep the efficiency of magnetic circuit. Experimental results show the validity of the yoke in the hybrid type actuator.

• 한국인쇄학회지
• /
• 제19권1호
• /
• pp.28-41
• /
• 2001

Rheological properties of ink and Ink-Water balance are the important factors in lithographic printing. Laboratory test method which determines the emulsification rate of dampening solution and ink has been described. The emulsification theory and laboratory test method deduced from Surland and it has become a useful tool for the industry. The effects of pH value and surface tension of dampening solution on the emulsification rate has been tested by many researcher. In this paper we focused on the factors which influence in the emulsification such as pH and surface tension of dampening solution and emulsifying temperature. To study on the factors determining the emulsion velocity, we have measured water pickup and calculated emulsion velocity constant 'k' and activation energy.

• 한국자기학회지
• /
• 제9권4호
• /
• pp.217-222
• /
• 1999

공업적으로 세라믹공정에 많이 사용되고 있는 습식 볼밀링으로 NiCuZn ferrite 제조과정 중 혼입되는 불순물의 양을 조사 검토하였다. NiO, CuO, ZnO 및 Fe2O3의 화학조성을 변화시켜 25 vol%로 혼합하고 스테인레스 볼밀로 습식방법을 이용하여 18시간 분쇄한 후 건조시켜 $700^{\circ}C$ 3시간 하소하였다. 하소한 분말을 다시 상기와 같은 방법으로 65시간 스테인레스 볼밀로 최종 분쇄하여 저온소결용 NiCuZn ferrite(NCZF) 소재를 제조하였다. NCZF 연자성 소재를 만드는 동안 혼합 분쇄과정에서 혼입되는 불순물의 스테인레스 스틸의 양은 산화철 및 산화니켈의 함량에 많은 영향을 받았고, 하소 후의 분쇄과정에서 혼입되는 불순물의 양은 결정화된 정도에 따라 영향을 받았다. 전자기적 특성을 갖는 화학조성의 조절을 위하여, 출발원료의 함량에 따라 분쇄과정에서 혼입되는 스테인레스 스틸의 함량을 도출하는 형식을 유도하였다.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.74-79
• /
• 1998

The use of a fiber Fabry-Perot interferometer (FFPI) as an optical current transducer is demonstrated. A conventional inductive pickup coil converts the time-varying current I(t) being measured to a voltage waveform V(t) applied across a piezeolectric strip to which the FFPI is bonded. The strip experiences a longitudinal expansion and contraction, resulting in an optical phase shift ${\phi}(t)$ in the fiber proportional to V(t). This phase shift is measured using a frequency-modulated semiconductor light source, photodiodes to monitor the reflected light from the FFPI and the laser power, and a digital signal processor. Calibration routines compute V(t) and I(t) from the measured phase shift at a l KHz rate. Response to 60 Hz ac over the design range 0-1300A rms is characterized Transient response of the FFPI transducer is also measured.