• 경영과학
• /
• 제21권3호
• /
• pp.115-127
• /
• 2004

In this paper, we describe an intelligent monitoring and control system for pick-up/delivery service. This system applies geographical information system(GIS), global positioning system(GPS) and wireless communication technologies for managing pick-up/delivery operations more effectively. It consists of three subsystems, pick-up/delivery sequence planning system, pick-up/delivery monitoring system, and PDA execution system. Pick-up/delivery sequence planning system generates routes and schedules for pick-up/delivery using GIS and optimization techniques. Pick-up/delivery monitoring system monitors current positions of vehicles and actual pick-up/delivery results as compared with planned routes and visit times, while PDA execution system transmits information for vehicles positions and actual pick-up/delivery results using GPS and wireless communication technologies. The intelligent monitoring and control system is currently being used for the pick-up parcel service in a local post office of Korea Post.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.191-194
• /
• 2002

In optical pick-up, optical components such as objective lens, collimator, mirror, laser diode and photo diode are mounted on the pick-up base. These components must keep their original position during operation for proper transmittance of information from laser diode to optical disk and back to photo diode. However, micro thermal deformation of pick-up base which is induced by thermal environment during operation can deteriorate the performance of optical pick-up. Therefore, it is important to measure and analyze the thermal deformation behavior of pick-up base under thermal environment. In the present study, a measurement system using holographic interferometry was designed to measure micro thermal deformation of pick up base. The measurement system was verified by using the deformation of cantilever with prescribed motion actuated by PZT with 1 nm resolution. Interferometric measurement was compared quantitatively with that induced by PZT actuator. Finally, micro thermal deformation of pick-up base under actual thermal environment was measured using the present holographic interferometry and the results were analysed.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2519-2528
• /
• 2022

The child pick-up behavior of parents during an emergency can cause heavy traffic congestion and failing to evacuate an affected area successfully. In this study, we analyzed the effect of child pick-up behavior using, as an example, a nuclear power plant accident caused by an earthquake, which is a typical no-notice emergency. A quake was assumed to occur near the Shin-Kori nuclear power plant in Ulsan, Korea, resulting in a nuclear power plant accident. An agent-based dynamic simulation model using VISSIM was employed to conduct sensitivity analyses with different child pick-up rates. The results confirmed that parents are a major cause of congestion and a vulnerable class in an emergency evacuation. The child pick-up behavior caused significant traffic congestion, and parents who pick up their children showed a higher evacuation failure rate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.210-210
• /
• 2004

최근 광 디스크로부터 신호를 검출하고 기록하는 핵심장치인 장 Pick-up이 점차로 고기능화, 소형화, 경량화 되면서 광 기록장치들의 발전에 크게 기여하고 있다. 초소형, 초경량 광 Pick-up을 생산하기 위해서는 광 Pick-up의 무게와 크기에 큰 영향을 미치는 렌즈의 재료를 유리에서 플라스틱으로 전환하고, 비구면 렌즈를 사용하는 것이 필요하다. 플라스틱 비구면 렌즈를 대량 생산하기 위해서 가장 많이 사용되는 방법이 사출성형이고, 소형, 경량, 휴대기능을 강조하는 제품동향으로 인하여 플라스틱 렌즈의 주요 생산기술인 사출성형의 중요성이 날로 부각되고 있다.(중략)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.786-790
• /
• 2001

In this paper, we propose an optimum design method for optical pick-up actuators. Using this method, we can design an optimal pick-up actuator having the required tracking/focusing performances. Also, the designed actuator has the small mass, force constant for small size of magnetic circuit and large resistance for reduction of heat generation. Simulation results show that this method can be potentially implemented in all the pick-up actuators.

• 한국주조공학회지
• /
• 제22권4호
• /
• pp.167-173
• /
• 2002

The hydrogen gas pick-up problem that can occur during Lost Foam Casting was investigated by reduced pressure test and practical Lost Foam Casting. The proper test pressure of reduced pressure test was determined by experiments not to use polystyrene and gas contents of the melt were calculated from density measurement results. The results showed that the hydrogen pick-up increased with the increased amount of polystyrene that was replaced by melt. The hydrogen pick-up was larger in the case of no degassed melt than that of degassed melt. So the hydrogen pick-up depended on the initial hydrogen content of the melt and the contact time of the melt with the decomposed gas phase. The mold evacuation decreased the hydrogen pick-up and increased the flow length of melt during Lost Foam Casting. And the error of calculated hydrogen pick-up was calculated by numerical method.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.12-22
• /
• 2017

Purpose: This aim of this study was to develop a pick-up type pulse crop harvester for harvesting cut and dried pulse crop. Methods: The pick-up type pulse crop harvester was designed and constructed. Its specifications and operating performance were investigated. Results: Compared with conventional bean harvesters, the pick-up type pulse crop harvester adopted seven rows of chains with tines to pick-up the cut and dried pulse crop on a flat or ridged field, two transverse threshing drums with steel wire teeth to reduce the threshing speed, and a tilt plate and plastic bucket elevator for conveying clean grain to reduce damage. The threshing speed and the oscillating frequency of the separating and cleaning parts according to crop type and condition could be varied easily to efficiently use engine power and to improve harvesting performance. The harvester showed forward speed ranges of 0 ~ 1.5 m/s during harvesting operation, and 0 ~ 2.5 m/s during road travelling. The pick-up width of the harvester was about 1 m. Conclusions: The pick-up type self-propelled 51.5 kW harvester was designed and constructed to harvest cut and dried pulse crop. The effective field capacity of the harvester was predicted as above 40 a/h.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.891-895
• /
• 1996

Performance and efficiency of hybrid (hydraulic-mechanical) pick-up device of deep sea manganese nodules collector are very sensitive to altitude and altitude of pick-up head relative to undulating seafloor. For this reason, motion control of pick-up head relative to the changing deep sea topography and other disturbances is of particular importance in design of pick-up device. The concept of design axiom is applied to a pick-up device of hybrid type. Kinematic analysis conducted in absolute Cartesian coordinates gives position, velocity, and acceleration of the hydraulic cylinders which enable the pick-up head to keep the preset optimal distance from seafloor. Inverse dynamic analysis provides the driving forces of hydraulic cylinders and the reaction forces at each joint. Design sensitivity analysis is performed in order to investigate the effects of possible design variables on the change of the maximum strokes of hydraulic cylinders. The direct differentiation method is used to obtain the design sensitivity coefficients.

• 한국소음진동공학회논문집
• /
• 제22권9호
• /
• pp.853-860
• /
• 2012

This paper identifies a cause of pick up noise in a laser printer and a relationship between pick up noise and major components related to pick up noise. A pick up sound is affected by many components such as spring force, spring constant, and friction coefficient. Objective evaluation for the pick up sound is difficult because of back ground sound such as operating sound. Especially, a sound between a friction pad and a paper in the process of printing has become an essential issue in an aspect of quality evaluation. However the existing criteria for determining the above sound have solely relied on human's subjective judgments; which highlights the requirement to objectify these criteria. In this paper, the standard of existing pick up noise is established by finding the tonality, which is a psychoacoustic parameter, of noticeable limit sound level. Based on the findings of the method, the study has found factors which cause pick up noise and suggests the substitution of following components of printers such as spring constants, spring force, and the quality of friction pads. As a result, it is confirmed that the proposed pick up noise index has usefulness to classify whether existence of pick up noise with an objective evaluation and not to occur the noise based on design optimized combination of laser printer components.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.578-583
• /
• 2014

Optical pick-up is a core component for data read/write operations in optical disc drives, and an optical pick-up performance evaluator is an instrument used to analyze the overall performance of an optical pick-up. Due to inevitable errors in an analog measurement circuit, resultant evaluation data is not guaranteed to be accurate. In this paper, a calibration method for an optical pick-up performance evaluator is proposed to ensure evaluation accuracy. Measured data is corrected by a 1st order correction function, and a calibration process based on least-square method is utilized to obtain correction coefficients of the correction function. The proposed calibration method is applied to experiments, and enhanced accuracy is presented with resultant evaluation data.