• Food Science of Animal Resources
• /
• v.37 no.1
• /
• pp.87-97
• /
• 2017

This study aimed at optimizing the manufacturing conditions of a milk beverage supplemented with coffee, and monitoring its physicochemical and sensory properties during storage. Raw milk, skim milk powder, coffee extract, and emulsifiers were used to manufacture the beverage. Two sucrose fatty acid esters, F110 and F160, were identified as suitable emulsifiers. The optimum conditions for the beverage manufacture, which can satisfy two conditions at the same time, determined by response surface methodology (RSM), were 5,000 rpm primary homogenization speed and 0.207% sucrose fatty acid emulsifier addition. The particle size and zeta-potential of the beverage under the optimum condition were 190.1 nm and $-25.94{\pm}0.06mV$, respectively. In comparison study between F110 added group (GF110) and F160 added group (GF160) during storage, all samples maintained its pH around 6.6 to 6.7, and there was no significant difference (p<0.05). In addition, GF110 showed significantly higher zeta-potential than GF160 (p<0.05). The particle size of GF110 and GF160 were approximately 190.1 and 223.1 nm, respectively at initial. However, size distribution of the GF160 tended to increase during storage. Moreover, increase of the particle size in GF160 was observed in microphotographs of it during storage. The $L^*$ values gradually decreased within all groups, whereas the $a^*$ and $b^*$ values did not show significant variations (p<0.05). Compared with GF160, bitterness, floating cream, and rancid flavor were more pronounced in the GF110. Based on the result obtained from the present study, it appears that the sucrose fatty acid ester F110 is more suitable emulsifier when it comes to manufacturing this beverage than the F160, and also contributes to extending product shelf-life.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.436-441
• /
• 2003

The physiochemical properties of wheat flour dough added with onion powder were investigated. The color value of mixed onion powder was added and had low values of lightness and redness, as well as high value of yellowness. Water absorption of the wheat flour dough decreased with the increase in the onion powder. Both development time and stability of the wheat flour dough with onion powder added were less than those of the control. An increase in the added amount of onion powder resulted in an increase of weakness. The maximum viscosity gradually decreased with the increase the amount of onion powder, while the temperature of gelatination did not change. The wheat flour dough extensibility decreased, and the resistance of extension and area under the curve increased in the onion powder. It is of considerable note that the pH of the wheat flour dough decreased in the process of fermentation with an increase in the amount of onion powder.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.865-870
• /
• 1990

Four different fermentation methods of Korean cucumber pickles were compared with conventional method, pickling in 10% NaCl solution at $25^{\circ}C$, in order to improve the storage stability. The methods studied were brining the cucumbers in hot($90^{\circ}C$) 10% NaCl solution(method A), addition of KCl and $CaCl_2$ into the hot salt solution(method B) addition of a sodium salts mixture of phosphates, nitrite and citrate into half fermented pickles prepared by method B(method C), substituted nitrite and citrate with KCl in method C(method D). It was found from results that the method C and D reduced the decreasing rate of pH very significantly by more than 3 fold and method B also showed the reducing effect. However, higher total acidity was measured for method C and D, which was opposite to pH results. Changes in hardness of cucumber showed little difference to control while color of brining solution exhibited some difference in their Hunter values. Organoleptic comparison showed a clear effect of salts mixtures by receiving the significant higher scores in fresh cucumber flavor and lower values in yeast moldy and sour flavor for method C and D when those were compared to control.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.664-668
• /
• 2001

The physical and chemical stabilities of carthamin of red pigment from safflower petals were investigated at various conditions of pHs, temperatures, inorganic ions, sugars, light and polysaccharides. The half-life values at pH 3.0, 5.0, 9.0 and 11.0 were 5.3, 5.0, 11.0 and 45.0 h, respectively, at $25^{\circ}C$. Therefore, carthamin is unstable at acidic condition. Carthamin was red, orange and yellow at acidic, neutral and alkaline solutions, respectively. At pH 3.0, carthamin was thermally unstable and the half lives were 3.62, 9.05 and 48.2min at $90^{\circ}C$, $70^{\circ}C$ and $50^{\circ}C$, respectively. Among various inorganic ions, $Al^{3+}$ stabilized carthamin at acidic condition. At pH 5.0, carboxymethylcellulose prolonged the half-lives of carthamin at $25{\sim}90^{\circ}C$. Carthamin was very sensitive to light (20,000 lux) and the half-life was 2.32 min at pH 3.0.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.167-172
• /
• 2000

The purpose of this study is to develop a transurethral liquid suppository containing prostaglandin $E_1\;(PGE_1)-loaded$ microemulsion, which undergoes a phase transition to gels at body temperature. The effects of oils, ethanol as solvent and HCl as pH-controlling agent on the physicochemical properties of liquid suppositories composed of poloxamer P 407, P 188 and carbopol was investigated. The stability of $PGE_1$ and release of $PGE_1$ from liquid suppository were evaluated. Oils such as Neobee and soybean oil significantly decreased the gelation temperature but increased the gel strength of liquid suppository due to their strongly binding with the components of liquid suppository base. However, ethanol slightly did the opposite. The pH of liquid suppositories hardly affected the gelation temperature and gel strength due to addition of very small HCl (0.005-0.01%). A liquid suppository [$PGE_1/P$ 407/P 188/carbopol/Neobee/ethanol/HCl (0.2/14/14/0.4/7/2/0.005%)], which had the gelation temperature $(34.2{\pm}0.6^{\circ}C)$ and gel strength $(31.35{\pm}4.37\;sec)$ suitable for liquid suppository system, was easily administered and not leak out from the body. About 60% of $PGE_1$ was released out within 2 h from this formulation. It was shown that the release of $PGE_1$ was proportional to the square root of time, indicating that $PGE_1$ might be released from the suppository by Fickian diffusion. It was stable at $4^{\circ}C$ for at least 2 months. The results suggest that transurethral liquid suppository containing prostaglandin $E_1-loaded$ microemulsion is thought to be a convenient, safe and effective dosage form for $PGE_1$. However, it should be further developed as a more convenient and stable dosage form for $PGE_1$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.5
• /
• pp.616-621
• /
• 2017

The objective of this study was to investigate the physicochemical properties of domestic strong wheat flour (DSWF). Three commercial DSWFs (D1, D2, and D3) were compared with imported strong wheat flour (ISWF). DSWFs had higher moisture content, crude protein content, lightness, and whiteness than ISWF. DSWFs showed lower solvent retention capacity and water absorption index than ISWF. DSWFs also showed significantly higher water solubility index than ISWF (P<0.05). Setback values by rapid visco analysis were significantly higher in D1 and D2 than in ISWF and D3, which means ISWF and D3 were better in retarding retrogradation. Differential scanning calorimetry results showed that ISWF required 6.2 J/g of energy for phase transition, whereas DSWFs needed 6.67~7.13 J/g. The farinograph results showed that ISWF had higher water absorption, longer dough stability time, and significantly higher softening of dough at 20 min than DSWF (P<0.05). Dough resistance and extensibility were higher in ISWF than in DSWFs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.210-216
• /
• 2008

Leuconostoc mesenteroides SM isolated from a raw carrot was used for the fermentation of carrot juice (CJ). Lactic acid fermentation of CJ was performed at $25^{\circ}C$ for 24 hr with $0{\sim}20%$ sucrose concentration, resulting in the production of mucilage. The fermented CJ showed the complete conversion of sugar into dextran after fermentation for 24 hr in the presence of sucrose below 15% concentration. With 15% sucrose, the fermented CJ had pH 3.8, 0.9% acidity, consistency index of $3.5\;Pa{\cdot}s^n$. After cold storage for 3 weeks, fermented CJ showed slight increase in acidity and relatively constant value in pH; however, the consistency index, red color value and viable cell counts were slightly decreased for 3 weeks. The ${\beta}-carotene$ content in CJ was drastically decreased by lactic acid fermentation for 24 hr, indicating $72\;{\mu}g/mL$ as compared to $142\;{\mu}g/mL$. The fermented CJ had improved body texture, red color and stability without sedimentation.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.206-210
• /
• 2003

Effects of NaCl concentration (0, 1, 2, and 3%) on the physico-chemical characteristics of dark, firm, dry (DFD) and normal meat batter were examined. Before heating, pH values of DFD and normal meat batter decreased up to 0.23 (DFD) and 0.2 (normal) units, which after heating increased up to $0.16{\sim}0.28$ and $0.17{\sim}0.23$ units, as NaCl concentration increased from 0 to 3%. Cooking loss and diameter reduction of DFD meat batter were lower than those of nomal meat batter and decreased. whereas protein solubilities and emulsion stabilities of DFD and normal meat increased, with increasing NaCl concentration. Protein solubility and emulsion stability of DFD meat were higher than those of nomal meat (p<0.05). Viscosity and hardness of DFD meat batter were higher than those of normal meat batter and increased as NaCl concentration increased from 0 to 3%.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.211-217
• /
• 1984

To study affinity of proteolytic enzymes to soy proteins, the physicochemical and functional properties of enzymatically modified protein products, kinetic parameters and degree of hydrolysis were measured using trypsin, alcalase (serine type protease) and pronase. Bacterial alcalase and pronase showed much greater affinity to soy protein than animal intestinal trypsin. This effect was very significant when unheated soy isolate was used as a substrate. Specific activities of these enzymes decreased with the increment of substrate concentration (over 2.0%, w/v) when heat denatured soy protein was used as a substrate. However, the decrease in specific activity was negligible at substrate concentrations lower than 2.0%. Polyacrylamide gel electrophoretic results showed that the pattern of 2S protein band changed distinctly in alcalase hydrolysis as compared with those of trypsin and pronase. Protein solubilities of alcalase and pronase hydrolyzates increased by 25-30%, at their pI (pH 5.0) over the control. Virtually no change was observed in solubility by trypsin hydrolysis. Heat coagulability and calcium-tolerance of the protein increased by enzymatic hydrolysis. No clear tendency, however, was observed for emulsion properties, foam expansion and the amount of free -SH groups. The enzyme treatment considerably decreased foam stability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1366-1372
• /
• 2017

This study compared the physicochemical quality characteristics of the Omija beverage for 36 weeks (9 months) depending on the storage container and storage temperature. From 3 weeks of storage, the optical density showed a significant difference according to the storage container, and the soluble solid contents showed a significant difference according to the storage container, storage temperature, and storage container${\times}$temperature. The total polyphenol and total acidity decreased slightly in the late storage period at all transparent and brown bottle treatments but the pH increased slightly. Generally, changes in the quality characteristics of Omija beverage at $4^{\circ}C$ storage were less than that at $20^{\circ}C$ and $36^{\circ}C$ storage. Correlation analysis of each factors, optical density, soluble solid content, total polyphenol, pH, and total acidity showed a positive correlation with each item according to the storage period. The storage period, particularly the transparent bottle treatment, appeared to have a significant impact on reducing the optical density. A few quality changes were observed after the brown bottle treatment for 36 weeks. In addition the stability according to the storage temperature was confirmed in each treatment. The brown bottle treatment is effective in maintaining the quality of Omija beverage for 36 weeks.