• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.107-113
• /
• 2011

This paper describes a development of a loop filter design in a physical modeling of the plucked string instrument. The conventional method proposed by V$\"{a}$lim$\"{a}$ki cannot estimate right parameters if a sound has either very short sustain or no sustain. In order to overcome this drawback, we propose the use of the decay region and 5 to 20 harmonics of the sound in the estimation of loop filter parameters. The most appropriate filter coefficient is chosen by frequency signal to noise ratio. To verify the performance of the proposed method, the guitar, gayageum and geomungo were selected as the target because they have different shape, structure, and material of strings. Regardless of the duration of harmonics, the proposed method was able to estimate the loop filter parameters representing frequency-dependent damping of harmonics.

• The Journal of Korean Physical Therapy
• /
• v.34 no.3
• /
• pp.98-103
• /
• 2022

Purpose: New therapeutic approaches have emerged to improve gait ability in patients with brain damage, such as action observation learning (AOT), auditory cueing, motor imagery etc. We attempted to investigate the effects of AOT with auditory cueing (AOTAC) on gait function in patients with stroke. Methods: The eighteen stroke patients with a unilateral hemiparesis were randomly divided into three groups; the AOTAC, AOT, and control groups. The AOTAC group (n=8) received training via observing a video that showed normal gait with sound of footsteps as an auditory cue; the AOT group (n=6) receive action observation without auditory stimulation; the control group (n=5) observed the landscape video image. Intervention time of three groups was 30 minutes per day, five times a week, for four weeks. Gait parameters, such as cadence, velocity, stride length, stance phase, and swing phase were collected in all patients before and after each training session. Results: Significant differences were observed among the three groups with respect to the parameters, such as cadence, velocity, stride length, and stance/swing phase. Post-hoc analysis indicated that the AOTAC group had a greater significant change in all of parameters, compared with the AOT and control groups. Conclusion: Our findings suggest that AOTAC may be an effective therapeutic approach to improve gait symmetry and function in patients with stroke. We believe that this effect is attributable to the change of cortical excitability on motor related to cortical areas.

• Physical Therapy Korea
• /
• v.17 no.2
• /
• pp.60-66
• /
• 2010

In chronic ambulatory hemiplegic patients, structural changes might be developed at both ankles possibly due to unequal and repetitive weight bearing on tendons and ligaments. We examined ankles by sonography to find out structural changes of tendons and ligaments of both ankles in ambulatory hemiplegic patients. Nineteen ambulatory hemiplegic patients over 1 year were included as study subjects. All subjects had no previous trauma or disease history in their ankle joints and they were able to walk independently or with supervision but had spastic ankles with equinovarus tendency. We examined both ankle joints by sonography to see joint effusion and measure width, thickness, and area of tendons of the tibialis anterior, tibialis posterior, and Achilles, and also ligaments of the anterior talofibular and calcaneofibular. We compared sonographic features of the hemi-side ankle with the sound-side ankle. There were no significant differences between hemi-side and sound-side ankles in almost all measured parameters of tendons and ligaments. However, the width of the hemi-side tibialis posterior tendon ($7.24{\pm}1.52$ mm) was narrower than the sound-side tendon ($8.61{\pm}1.37$ mm). With the amount of active joint motion and weight bearing possibly preventing ligament and tendon atrophy even though marked weakness, spasticity occurred during the chronic hemiplegic phase.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.2E
• /
• pp.64-72
• /
• 2010

Osteoporosis is a skeletal disease characterized by two factors: reduced bone mass and microstructure disruption of bone tissue. These symptoms increase bone fragility and can contribute to eventual fracture. In recent years, quantitative ultrasound (QUS) technologies have played a growing role in the diagnosis of osteoporosis. Most of the commercial bone sonometers measure speed of sound and/or broadband ultrasound attenuation at peripheral skeletal sites. However, QUS parameters are purely empirical measures that have not yet been firmly linked to physical parameters, such as bone strength or porosity, and the underlying physics for their variations in cancellous bone is not well understood yet. This paper reviews the QUS technologies for the diagnosis of osteoporosis and also addresses several theoretical models, such as the Biot model, the scattering model, the stratified model, and the modified Biot-Attenborough model, for ultrasonic wave propagation in bone.

• Ocean and Polar Research
• /
• v.34 no.1
• /
• pp.85-91
• /
• 2012

Physical properties such as sound speed contrast (h) and density contrast (g) of the interested target are key parameters to understand acoustic characteristics by using theoretical scattering models. The density and sound speed of moon jellyfish (common jellyfish, Aurelia aurita s.l.) were measured. Sound speed contrast (h) was measured from travel time difference (time-of-flight method) of an acoustic signal in a water tank for APOP studies (Acoustic Properties Of zooplankton). Density contrast (g) was measured by the displacement volume and wet weight (dual-density method). The sound speed remained almost constant as the moon jellyfish increased in bell length. The mean values${\pm}$standard deviation of h and g were $1.0005{\pm}0.0012$ and $0.9808{\pm}0.0195$), respectively. These results will provide important input for use in theoretical scattering models for estimating the acoustic target strength of jellyfish.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.435-438
• /
• 2005

Until now, a home appliance mostly has revealed physical quantities created by the standpoint of engineers, by using the A-weighted sound pressure level and the sound power. It is, however, obviously impossible to characterize a complex sound with a single number. Many parameters must be considered. In addition to loudness, we must take into account frequency and amplitude variation over time, spectral balance, tonality, and many other attributes. Thus, in this research, the general tendency of consumer psychology was investigated for the refrigerator's sound. The noise from the refrigerator was evaluated by not only the simple sound pressure levels but also the consumer's sense of hearing. And also, in order to improve the quality of sound through the design change, the consumer's evaluation was analysed and related to the engineering quantities. With the several design changes, finally the most silence refrigerator in the world was developed with considering the consumer's hearing of sense.

• Science of Emotion and Sensibility
• /
• v.9 no.2
• /
• pp.133-140
• /
• 2006

In order to investigate the sensation of the fabric sound simulating the real wear-condition, the fabric sound simulator using reciprocating friction was developed. Fabric sounds from 5 specimen were generated by the fabric sound simulator and recorded using high performance microphone. Physical sound parameters of fabrics including level pressure of total sound (LPT), level range (${\Delta}L$), and frequency differences (${\Delta}f$) were calculated. For psychological evaluation, seven adjectives for sound (softness, loudness, sharpness, clearness, roughness, highness, and pleasantness) were used as the semantic differential scale. Fabric sounds by reciprocating friction of nylon taffeta and polyester leno had the highest value of LPT and evaluated as loud, sharp, rough, and unpleasant while polyester ultra suede and silk crepe de chine haying the lower LPT and ${\Delta}f$ were perceived as soft and quite. Comparing with fabric sound by one-way friction, fabric sound by reciprocation friction was perceived as more sharp, loud, and rough. LPT was also the most important factor affecting the sensation of the fabric sound by reciprocating friction.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.186-193
• /
• 2017

Silla Great Bell was manufactured in order to ring for the new millennium in succession to King Seongdeok Divine Bell. This study investigates how Silla Great Bell is similar to King Seongdeok Divine Bell in respect of structure and sound. First, design and manufacturing processes are introduced and dimensions of the two bells are compared and the similarity is estimated. Three main characteristics of the sound of a Korean bell are magnificent and harmonic striking sound, dynamic beat, and long lasting hum tone. These three features are compared and objectively estimated using physical parameters. The purpose of the study is to provide useful information to manufacture Korean bell which has beautiful appearance and excellent sound.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.3
• /
• pp.264-274
• /
• 2012

Evaluation on the environmental noise is carried out by surveying subjective response of residents with physical measurement of noise during long period in field. Particularly field survey is used to make regulations from the analysis on how many people are annoyed for specific noise level, and laboratory test used to analyze the relationship between physical parameters of noise and subjective responses. In the laboratory controlling the variables is easy but the results could be biased because the condition in room would be different with field. Most of all noise exposure time is considered to be different with real situation, and this study aimed to evaluate the subjective response by exposure time of transportation noise, by applying three kinds of variable how much they give effects on the annoyance as the exposure time is operating condition, windows type and sound level. As a result there was somewhat difference between operating type and annoyance, which is caused by the sound characteristics operated in different condition. However the window type didn't give much effect to the annoyance as much as sound type. This means that the subjective response could give similar result by exposure time even for different window types. Most of all, the main factor affecting subjective response is considered to be the sound level and the exposure time.

• Korean Journal of Agricultural Science
• /
• v.32 no.2
• /
• pp.243-253
• /
• 2005

In agricultural ecosystem, soils which play important roles of storage and cycling of substances become a crtitical social problem due to rapid increase of contaminants with respect to our health. Soil as productivity should be interpreted as soil quality, that is important criteria in maintaining sustainable agriculture for production of safe food. Therefore, it needs to set the criteria of soil quality by considering environmental factors including relevant parameters which are involved in soil quality soil health because soils are widely distributed and have various characteristics such as physical, chemical, and biological propevties. Therefore, it requires intensive investigation of evaluation methods and development of related parameters for environmentally sound agriculture and safe soil management.