• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.17-17
• /
• 1992

The ceramic high transition temperature superconducting materials present many interesting characteristics that will be analysed from two points of view: physical behavior, and chemical aspects. From the first point of view, these materials display an enormous variety of different physical properties. At low doping levels the normal state shows antiferromagnetism and insulating behavior. At intermediate doping levels, an anomalous metallic state appears and, the optimum Tc in the superconducting state is generated. With increasing doping a normal metallic state develops and superconductivity starts to disappear. Many of the physical phenomena that describe the overall behavior when doping levels are changed will be discussed. From the poing of view of the chemical aspects. we well discuss some of the problems involved in the methods of preparation with particular emphasis on defects, crystal structures, critical currrents, and applications in technology.

• Korean Journal of Mathematics
• /
• 제23권1호
• /
• pp.11-27
• /
• 2015

Nonlinear partial differential equations are more suitable to model many physical phenomena in science and engineering. In this paper, we consider three nonlinear partial differential equations such as Novikov equation, an equation for surface water waves and the Geng-Xue coupled equation which serves as a model for the unidirectional propagation of the shallow water waves over a at bottom. The main objective in this paper is to apply the generalized Riccati equation mapping method for obtaining more exact traveling wave solutions of Novikov equation, an equation for surface water waves and the Geng-Xue coupled equation. More precisely, the obtained solutions are expressed in terms of the hyperbolic, the trigonometric and the rational functional form. Solutions obtained are potentially significant for the explanation of better insight of physical aspects of the considered nonlinear physical models.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2002년도 춘계학술대회 논문집
• /
• pp.190-194
• /
• 2002

Human uses sight, tactile sense to evaluate Total Hand Value(FUUAI) of textile fabrics. Tactile sense is important factor which decided the Total Hand Value of a textile fabric. When human feels the FUUAI, physical and physiological phenomena are occurred in finger. We first found out physical variable that is happened in fingertip when human is feeling the FUUAI. Such physical variable means characteristic of action tactual motion of finger such as moving range, tactile time, moved distance, speed of finger and applied force by finger. We study the relationship between action tactual motion and the ability in which the human distinguishes the textile fabric. As a result, we could know the characteristics of the tactual motion of fingertip to get high distinguishable ability. The characteristics were different in men and women respectively. In the case of man, touched time and moving range influenced to distinguish, and moving range, and the moving speed of finger influenced, in woman's case.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.381-388
• /
• 2011

This article presents the development of a model for SiC power diodes based on the physics of the semiconductor. The model is able to simulate the behavior of the dynamics of the charges in the N- region based on the stored charge inside the SiC power diode, depending on the working regime of the device (turn-on, on-state, and turn-off). The optimal individual calculation of the ambipolar diffusion length for every phase of commutation allows for solving the ambipolar diffusion equation (ADE) using a very simple approach. By means of this methodology development a set of differential equations that models the main physical phenomena associated with the semiconductor power device are obtained. The model is developed in Pspice with acceptable simulation times and without convergence problems during its implementation.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.229-240
• /
• 2019

The physical models are useful to understand the soil behaviour. Hence, these tools allow validating analytical theories and numerical data. This paper addresses the design, construction and implementation of a physical model able to simulate the soil liquefaction under different cyclic actions. The model was instrumented with a piezoelectric actuator and a set of transducers to measure the porewater pressures, displacements and accelerations of the system. The soil liquefaction was assessed in three different grain size particles of a natural sand by applying a sinusoidal signal, which incorporated three amplitudes and the fundamental frequencies of three different earthquakes occurred in Colombia. In addition, such frequencies were scaled in a micro shaking table device for 1, 50 and 80 g. Tests allowed identifying the liquefaction susceptibility at various frequency and displacement amplitude combinations. Experimental evidence validated that the liquefaction susceptibility is higher in the fine-grained sands than coarse-grained sands, and showed that the acceleration of the actuator controls the phenomena trigging in the model instead of the displacement amplitude.

• Korea-Australia Rheology Journal
• /
• 제16권2호
• /
• pp.63-73
• /
• 2004

Flow in a channel with an obstruction at the entry can be reverse, stagnant or forward depending on the position of the obstruction. These flow phenomena have potential applications in the control of energy and various flows in process engineering. Parameters that affect this flow inside and around the test channel are the gap (g) between the obstruction geometry and the test channel, the Reynolds number (Re) and the length (L) of the test channel. The influence of these parameters on the flow behavior was investigated using a flat plate obstruction at the entry of the channel. A low concentration polyacrylamide solution (0.018% by weight) showing a powerlaw fluid behavior was used as the fluid in this investigation. The flow phenomena were investigated by the velocity measurement and the flow visualization and their results were compared with numerical simulation. These results of low concentration polyacrylamide solution are also compared with the results of water published elsewhere (Kabir et al., 2003). The maximum reverse flow inside the test channel observed was 20% - 30% of the outside test channel velocity at a g/w (gap to width) ratio of 1 for Reynolds numbers of 1000 to 3500. The influence of the test channel length (L) and the Reynolds number (Re) on the velocity ratio ($V_i$/$V_o$: inside velocity/outside velocity in the test channel) are also presented and discussed here.

• 한국시뮬레이션학회논문지
• /
• 제25권3호
• /
• pp.41-51
• /
• 2016

본 연구는 보행자의 물리적 특성(크기, 모양, 자세 등)을 적용한 개선된 플로어 필드 모델(Floor field model; FFM)을 소개하고, 개선된 모델과 널리 알려진 다른 피난시뮬레이션 모델과의 비교를 통해 FFM의 한계점 파악 및 개선된 모델의 특징을 분석하고자 한다. FFM은 셀룰라 오토마타(Cellular automata)를 이용한 대표적 미시적 관점 보행 모델이지만 보행자의 크기, 모양, 자세 등의 물리적 특성을 세밀하게 반영하지 않는다. 이로 인해 보행자들 간의 충돌, 마찰 등의 현상을 모델링하기 어려우며 결과적으로 다른 모델들과 비교하였을 경우에 매우 짧은 대피 시간을 산출하고 있다. 본 연구는 물리적 현상을 반영할 수 있는 개선된 FFM을 제시하며, 개선된 모델과 기존 FFM, 시뮬렉스(Simulex), 패스파인더(Pathfinder) 등 다른 모델들과의 비교 실험을 수행하였다. 실험은 실제 캠퍼스 건물의 일부 공간을 대상으로 진행되었으며, 대피 인원의 변화에 따른 대피 양상의 비교와 각 출구별 대피 양상의 비교가 수행되었다. 이를 통해 FFM에서는 반영되지 않던 물리적 현상들이 개선된 모델에서는 상용 모델 수준으로 적용되는 점과 특히 시뮬렉스와 유사한 형태의 대피 양상을 보임을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제24권4호
• /
• pp.493-508
• /
• 2006

Vibration mode localization and frequency loci veering in disordered coupled beam system are studied in this paper using finite element analysis. Two beams coupled with transverse and rotational springs are examined. Small disorders in the physical parameters such as Young's modulus, mass density or span length of the substructure are introduced in the investigation of the mode localization and frequency loci veering phenomena. The effect of disorder in the elastic support on the mode localization phenomenon is also discussed. It is found that an asymmetric disorder in the weakly coupled system will lead to the occurrence of mode localization and frequency loci phenomena.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.51-56
• /
• 2001

Vapor explosion is one of the most important problems encountered in severe accident management of nuclear power plants. In spite of many efforts, a lot of questions still remain for the fundamental understanding of vapor explosion phenomena. Therefore, KAERI launched a real material experiment called TROI using 20 kg of UO2 and ZrO2 to investigate the vapor explosion phenomena. In addition, a small-scale experiment with molten-tin/water system was performed to quantify the characteristics of vapor explosion and to understand the phenomenology of vapor explosion. A number of instruments were used to measure the physical change occurring during the vapor explosion. In this experiment, the vapor explosion generated by molten fuel water interaction is visualized using high speed camera and the pressure behavior accompanying the explosion is investigated.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.8-17
• /
• 2012

Three kinds of cationic acrylamide copolymer with different branch degree were prepared controlling the dosage of N, N'-methylenebisacrylamide. The physical characteristics of the branch-degree-modified copolymers were analyzed by intrinsic viscosity and charge density. The branch degree measurements were investigated by applying the colloidal titration phenomena using a spectrophotometer and comparison with the cationic regain measurement method. The results showed that the absorbance behaviors of spectrophotometer were distinctively different with the branch degree of copolymers. Also, the branch degree determinations and molecular structure estimations of the copolymers were numerically measured by applying the titration phenomena using a spectrophotometer. Finally, three kinds of branch-degree-modified copolymers were applied to flocculation test using arbocel micro pulp for the determination of flocculation behavior by different morphology of cationic acrylamide copolymers.