• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1887-1895
• /
• 2013

In this study, physical experiments were performed in a two-dimensional wave flume to investigate the hydraulic and structural performance of a SFT model. The experiments were made by generating regular waves of different heights and periods under various conditions of buoyancy to weight ratio (BWR) and water depth as well. Through the analysis of the experimental data, it was clarified that the sway and heave motions of the tunnel body linearly increased with wave height and period. In contrast, the roll motion was rather insignificant unless wave height and period were comparatively large as the design wave. Similarly proportional relationship with respect to wave height and period was obtained in case of the maximum tensile force acting on the tension legs and the wave loads on the tunnel body. Regarding the change of water depth or BWR conditions, generally decreasing trend was obtained according to increase of water depth but decrease of BWR for both of the magnitudes of structural behaviors or wave loadings on the SFT structure.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.2
• /
• pp.166-173
• /
• 2010

Objectives: On December 7, 2007, the Hebei Spirit oil tanker spilled out 12,547 kl of crude oil on the Yellow Sea 10 km away from the cost of Taean Province, Korea. As the coastline has been contaminated, local residents have been exposed to crude oil. Because the residents were showing many symptoms, we investigated the acute health effects of this oil spill on them. Methods: We conducted a cross-sectional study consisting of the heavy and moderately oil soaked area in Taean and the lightly oil soaked area in Seocheon. Ten seashore villages were selected from each area, and 10 male and female adults were selected from each village. We interviewed the subjects using a structured questionnaire on the characteristics of residents, the cleanup activities, the perception of oil hazard, depression and anxiety, and the physical symptoms. The odds ratios and 95% confidence intervals were analyzed using logistic regression analysis. The logistic regression model was adjusted for age, gender, education, smoking, the perception of oil hazard and anxiousness. Results: The more highly contaminated the area, the more likely it was for residents to be engaged in cleanup activities and have a greater chance of exposure to oil. The indexes of anxiety and depression were higher in the heavy and moderately oil soaked areas. The increased risks of headache, nausea, dizziness, fatigue, tingling of limb, hot flushing, sore throat, cough, runny nose, shortness of breath, itchy skin, rash, and sore eyes were significant. Conclusions: The results suggest that exposure to crude oil is associated with various acute physical symptoms. Long-term investigation is required to monitor the residents' health.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2006.04a
• /
• pp.55-56
• /
• 2006

This thesis describes the use of measured aerosol size distributions and size-resolved hygroscopic growth to examine the physical and chemical properties of several particle classes. The primary objective of this work was to investigate the optical and cloud forming properties of a range of ambient aerosol types measured in a number of different locations. The tool used for most of these analyses is a differential mobility analyzer / tandem differential mobility analyzer (DMA / TDMA) system developed in our research group. To collect the data described in two of the chapters of this thesis, an aircraft-based version of the DMA / TDMA was deployed to Japan and California. The data described in two other chapters were conveniently collected during a period when the aerosol of interest came to us. The unique aspect of this analysis is the use of these data to isolate the size distributions of distinct aerosol types in order to quantify their optical and cloud forming properties. I used collected data during the Asian Aerosol Characterization Experiment (ACE-Asia) to examine the composition and homogeneity of a complex aerosol generated in the deserts and urban regions of China and other Asian countries. An aircraft-based tandem differential mobility analyzer was used for the first time during this campaign to examine the size-resolved hygroscopic properties of particles having diameters between 40 and 586 nm. Asian Dust Above Monterey (ADAM-2003) study was designed both to evaluate the degree to which models can predict the long-range transport of Asian dust, and to examine the physical and optical properties of that aged dust upon reaching the California coast. Aerosol size distributions and hygroscopic growth are measured in College Station, TX to investigate the cloud nucleating and optical properties of a biomass burning aerosol generated from fires on the Yucatan Peninsula. Measured aerosol size distributions and size-resolved hygroscopicity and volatility were used to infer critical supersaturation distributions of the distinct particle types that were observed during this period. The predicted CCN concentrations were used in a cloud model to determine the impact of the different aerosol types on the expected cloud droplet concentration. RH-dependent aerosol extinction coefficients are calculated at a wavelength of 550 nm.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.1
• /
• pp.139-158
• /
• 2013

This research aimed to determine how a combined yoga and tea meditation program would affect the happiness of adolescents. The investigation was conducted over a total of 11 sessions held twice a week with 15 female middle-school students. Each session lasted 90 min and comprised preparation for 5 min, Hatha yoga for 50 min, tea meditation for 15 min, the expression of feelings for 15 min, and 5 min were allocated to finishing the program and announcing the next session time. A t-test was performed before and after the program to analyze the effects of the program. A goodness of fit test, which is related to the improvement of happiness, was done through a path analysis. As a result, we were able to determine meaningful changes in the t-test scores of happiness, stress, and quality of life. The scores of mindfulness, physical self-concept, and self efficiency changed positively, but meaningful changes were not shown. To derive a final conclusion, we verified the mediator effect with respect to happiness through a structural model. Consequently, physical self-concept was activated as a promoter for improving self-efficiency and mindfulness. Mindfulness was the key factor that improved the happiness of the adolescent subjects.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.915-927
• /
• 2004

The purpose of this paper is to estimate the instream flow of the South Han River Basin to ensure an adequate supply of suitable quality of water for preservation and enhancement of aquatic ecosystems. Proposed methods is Physical Habitant Simulation System of Instream Flow Incremental Methodology. Accurate estimation on a water depth and a velocity distribution was acquired by applying a two dimensional hydrodynamic model for a simulation of a hydraulic parameter necessary for the habitat evaluation to be used in a physical habitat simulation system. The Habitat Suitability Criteria with the application of univariate curve on zacco platypus as a representative fish was able to be established by conducting a field investigation. The establishment of a hydrological materialistic balance between upper and lower streams was confirmed by conducting a simulation simultaneously together with a mainstream section, which was excluded from the considered sections for the inhabitation evaluation of fish.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.1
• /
• pp.19-25
• /
• 2022

Physical experiments were conducted to establish an empirical formula that predicts the wave force on the upside of the pavement behind crown wall of rubble mound seawall due to wave overtopping as well as the uplift force on the downside of the pavement. The experiments were performed by different conditions of the parapet, water depth, relative freeboard, and thickness of the armour layer. Then, the wave force on the upside and downside of the pavement behind the crown wall was analyzed. The parameters that affect the wave overtopping force and the uplift force were identified and empirical formulae were suggested for evaluating the forces on the pavement.

• Advances in concrete construction
• /
• v.16 no.4
• /
• pp.177-188
• /
• 2023

In the context of the shortage of river sand, two types of manufactured sand (MS) were used to partially replace river sand (RS) to design manufactured sand concrete (MSC). A total of 81 specimens were designed for uniaxial compression test and beam flexure test. Two parameters were considered in the tests, including the types of MS (i.e. limestone manufactured sand (LMS), pebble manufactured sand (PMS)) and the MS replacement percentage (i.e., 0%, 25%, 50%, 75%, 100%). The stress-strain curves of MSC were obtained. The effects of these parameters on the compressive strength, elastic modulus, peak strain, toughness and flexural strength were discussed. Additionally, the sensitivity of particle size distributions to the performance of MSC was evaluated based on the grey correlation analysis. The results showed that compared with river sand concrete (RSC), the rising slope of the stress-strain curves of limestone manufactured sand concrete (LMSC) and pebble manufactured sand concrete (PMSC) were higher, the descending phrase of LMSC were gentle but that of PMSC showed an opposite trend. The physical and mechanical properties of MSC were affected by the MS replacement percentage except the compressive strength of PMSC. When the replacement percentage of LMS and PMS were 50% and 25% respectively, the corresponding performances of LMSC and PMSC were better. In generally, when the replacement percentage of LMS and PMS were same, the comprehensive performance of LMSC were better than that of PMSC. The constitutive model and the equations for mechanical properties were proposed. The influence of particle ranging from 0.15 mm to 0 mm on the performance of MSC was lower than particle ranging from 4.75 mm to 0.15 mm but this influence should not be ignored.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.428-446
• /
• 1997

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2 of intercuspal distance) were varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as follows : 1. Displacement of buccal cusp in R model occurred and increased as widening of the cavity, and displacement in B model was little and not influenced by cavity width. 2. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 3. With the increase of the isthmus width, B model showed no change in the stress and strain. In R model, the stress and strain increased both in the area of buccal-pulpal line angle and the buccal side of marginal ridge, therefore the possibility of crack increased. 4. The stress and strain were distributed evenly on the tooth in B model, but in R model, were concentrated on the buccal side of the distal marginal ridge and buccal-pulpal line angle, therefore the possibility of fracture increased.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.627-643
• /
• 1995

The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on the maxillary left first molar and then filled with composite resin. Three dimentional model with 3049 nodes and 2450 8-node blick elements was made by the serial photographic method and isthmus (1/4, 1/3, 1/2 and 2/3 of intercusplal distance between mesiobuccal cusp tip and mesiolingual cusp tip) was varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 1500N was applied vertically on the node from the lingual slope of the mesiobuccal cusp. The results were as follows : 1. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 2. When it comes to stress distribution, the stress was concentrated in the facio-gingival line angle and the buccal side of the distal margin of the cavity in both Band R model. 3. With the increase of the isthmus width, the stress decreased in the area of the facio-gingival line angle, and increased in the area of facio-gingival line angle as well as the buccal side of the distal margin of the cavity in B model. In R model, the stress increased both in the area of facio-gingival line angle and the buccal side of the distal margin of the cavity, therefore the possibility of crack increased. 4. As the width of cavity increased, in B model, the direction of crack moved from horizontal to vertical on the facio-gingival line angle and the facio-pulpal line angle. In R model, the direction of the crack was horizontal on the facio-gingival line angle and moved from horizontal to the $45^{\circ}$ direction on the facio-pulpal line angle.

• Journal of Evidence-Based Herbal Medicine
• /
• v.1 no.2
• /
• pp.7-16
• /
• 2008

The main purposes of this study investigate as a cultural brand Oriental Medicine Cosmetics which has identification what images building up and which brand strategies are enforced refer to brand images of market. Follow this purpose, we want to investigate a concept of "Oriental Medicine Treatment" can become a brand or not through the Cosmetics. According to this purpose, we want to investigate that a concept of "Oriental Medicine" will be able to be Brand through the cosmetics. The Brand is emphasized the cultural value more than price and quality of the product. In case of "Oriental Medicine Cosmetics", above-mentioned fact is more important. Because "Oriental Medicine Cosmetics" is hard to divide into it's physical property and cultural character. What we want to comprehend through this investigation is, point out limitations of traditional marketing and the strategy of brand marketing which is possible to apply both the character and the history of "Oriental Medicine Cosmetics". Most important facts for this model, first, search for intermediately meanings for identification of "Oriental Medicine Cosmetics". Second, make a detailed plans after included the strategy of marketing communication at the inner part of cultural meanings. Should have done that, brand strategy and public relation tactics are composed in order identifiably with cultural. Finally, brand selling is able to move through the dimensional class. But it is necessary powerful mega brand for making a different level exceeding it's class.