• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.315-315
• /
• 2017

In Japan, more than 80 % of soybean growing area is converted fields and excess water is one of the major problems in soybean production. For example, recent study (Yoshifuji et al., 2016) suggested that in the fields of shallow groundwater level (GWL) (< 1m depth), rising GWL even in a short period (e.g. 1 day) causes inhibition of soybean growth. Thus it becomes more and more important to predict GWL and soil moisture in detail. In addition to conventional surface drainage and underdrain, FOEAS (Farm Oriented Enhancing Aquatic System), which is expected to control GWL in fields adequately, has been developed recently. In this study we attempted to predict GWL and soil moisture condition at the converted field with FOEAS in Biwa lake reclamation area, Shiga prefecture, near the center of the main island of Japan. Two dimensional HYDRUS model (Simuinek et al., 1999) based on common Richards' equation, was used for the calculation of soil water movement. The calculation domain was considered to be 10 and 5 meter in horizontal and vertical direction, respectively, with two layers, i.e. 20cm-thick of plowed layer and underlying subsoil layer. The center of main underdrain (10 cm in diameter) was assumed to be 5 meter from the both ends of the domain and 10-60cm depth from the surface in accordance with the field experiment. The hydraulic parameters of the soil was estimated with the digital soil map in "Soil information web viewer" and Agricultural soil-profile physical properties database, Japan (SolphyJ) (Kato and Nishimura, 2016). Hourly rainfall depth and daily potential evapo-transpiration rate data were given as the upper boundary condition (B.C.). For the bottom B.C., constant upward flux, which meant the inflow flux to the field from outside, was given. Seepage face condition was employed for the surrounding of the underdrain. Initial condition was employed as GWL=60cm. Then we compared the simulated and observed results of volumetric water content at depth of 15cm and GWL. While the model described the variation of GWL well, it tended to overestimate the soil moisture through the growing period. Judging from the field condition, and observed data of soil moisture and GWL, consideration of soil structure (e.g. cracks and clods) in determination of soil hydraulic parameters at the plowed layer may improve the simulation results of soil moisture.

• Journal of the Korean Geographical Society
• /
• v.43 no.4
• /
• pp.655-679
• /
• 2008

This study is to analyze the base of selection and feature of description on Korea-related content in Japanese curriculum(geography and history) and high-school geography textbooks. Japanese curriculum requires that there are two or three neighbor countries to be selected and their contents consist of life and culture and have to compare with those of japan in view of understanding and respect on similarity and difference. The content of physical environment is only dealt as factors influencing on life and culture because regional teaming of neighbor countries focus on it. Dok-do is described with conflict region in most of textbooks. But some textbooks describe Dok-do with territory of Shimane-Hyun in Japan or devide like japanese territory on the map. There are described han-gul(Korean language), confucianism, buddhism and christianity, han-bok(Korean clothes), rice and soup, bulgogi(Korean meat dishes) and scissors, spoon and chopsticks, ondol(Korean floor heater), etc. with the cases of specific Korean life and culture. And, exchange between Korea and Japan focuses on more cultural view increasing recently than political and economical view. Then Japanese high-school geography textbooks humanize geography because of they focus on life and culture and promote not only knowledge and understanding but also altruism and empathy because they focus on similarity and difference through comparison between neighbor country and Japan. This shows how to able to practice regional teaming in globalization and multicultural society.

• Smart Media Journal
• /
• v.9 no.3
• /
• pp.107-115
• /
• 2020

Recently, BIM has become mandatory in the construction field, research on various use cases is increasing. In particular, when virtual reality technology, one of the core technologies of the 4th industrial revolution, and BIM are combined, it can be used in various fields such as preliminary design review and construction simulation. Until now, however, virtual reality grafting technology is only used as a simple prototype or as a model house. Also, it is difficult to activate virtual construction because it is expensive to produce high-quality virtual reality contents. Therefore, in this paper, in order to increase the utilization and quality of the virtual construction field, a study was conducted to shorten the material mapping time, which takes a lot of time when producing virtual reality contents using BIM. To this end, object properties were assigned to enable material mapping in the BIM model, and materials most used in the construction field were configured, and automated material function development and final tests were conducted that automatically map properties and materials. For the test, 10 models were used and the test was repeated three times, and the productivity improvement of about 50.16% was finally achieved. In the future, we plan to conduct research on physical data weight reduction based on the advanced material mapping automation function and the large-capacity BIM model.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.11-20
• /
• 2010

The distributed rainfall-runoff model which is developed in the country requires a lot of time and effort to generate input data. Also, it takes a lot of time to calculate discharge by numerical analysis based on kinematic wave theory in runoff process. Therefore, most river basins using the distributed model are of limited scale, such as small river basins. However, recently, the necessity of integrated watershed management has been increasing due to change of watershed management concept and discharge calculation of whole river basin, including upstream and downstream of dam. Thus, in this study, the feasibility of the GIS based physical distributed rainfall-runoff model, K-DRUM(K-water hydrologic & hydraulic Distributed RUnoff Model) which has been developed by own technology was reviewed in the flood discharge process for the Geum River basin, including Yongdam and Daecheong Dam Watersheds. GIS hydrological parameters were extracted from basic GIS data such as DEM, land cover and soil map, and used as input data of the model. Problems in running time and inaccuracy setting using the existing trial and error method were solved by applying an auto calibration method in setting initial soil moisture conditions. The accuracy of discharge analysis for application of the method was evaluated using VER, QER and Total Error in case of the typhoon 'Ewiniar' event. and the calculation results shows a good agreement with observed data.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.189-196
• /
• 2020

Mosquitos serve as vectors for diseases, causing inconvenience as well as a threat to human life and health. Concern about mosquitos introducing and spreading new diseases has been intensifying. We observed a variety of mosquito habitats based on land cover classification from Korea's Ministry of Environment, and the mosquito species that could appear were classified according to the each habitat type. Finally, we suggested the best control methods for each type of habitat considering habitat characteristics and the ecological traits of mosquitos. Urban areas harbor various habitats for pests, contributing significantly to mosquito habitats. Control must be performed regarding larva and adults because various sources for habitats exist. Public mosquito control programs such as educational training, as well as information brochures can be effective in managing mosquito populations and public health. Agricultural areas show high densities of mosquito larva to lentic zones such as reservoirs, wetlands, paddy fields. So, biological control using natural predators may be effective in controlling mosquito populations. Forests are major habitats for Aedes albopctus, so physical controls should be deployed for residents living nearby, and excessive deforestation should be minimized. Other areas including aquatic ecosystems should be adopted regarding biological control using Bti (Bacillus thuringiensis var. israelensis) and chemical control for eradicating mosquitos. We classified habitats into four types of land cover patterns considering ecological traits and habitat preference, and suggest adequate control methods for each habitat type. Our suggestion can be used to positively contribute toward effective managing mosquito's density and reducing the damage to public health.

• Journal of KIISE:Information Networking
• /
• v.33 no.4
• /
• pp.333-342
• /
• 2006

The cdma2000 lxEV - DO mobile communication system provides broadcast and multicast services (BCMCS) to meet an increasing demand from multimedia data services. The servicing of video streams over a BCMCS network must, however, face a challenge from the unreliable and error-prone nature of the radio channel. The BCMCS network uses Reed-Solomon coding integrated with the MAC protocol for error recovery. We analyze this coding technique and show that it is not effective in the case of slowly moving mobiles. To improve the playback quality of an MPEG-4 FGS video stream, we propose the Hybrid error recovery scheme, which combines Reed-Solomon with ARQ, using slots which are saved by reducing the Reed-Solomon coding overhead. The target packets to be retransmitted are prioritized by a utility function to reduce the packet error rate in the application layer within a fixed retransmission budget. This is achieved by considering of the map of the error control block at each mobile node. The proposed Hybrid error recovery scheme also uses the characteristics of MPEG-4 FGS (fine granularity scalability) to improve the video quality even when conditions are adverse: slow-moving nodes and a high error rate in the physical channel.

• Journal of Environmental Policy
• /
• v.5 no.3
• /
• pp.25-56
• /
• 2006

We reviewed and compared nationwide surveys conducted in advanced countries (i.e., Japan, Germany, USA, and UK) with those in Korea, including the third Nationwide Survey of Natural Environments, which began in 2006 and will proceed until 2010. Based on this comparative analysis, we suggest alternatives to the nationwide survey of natural environments that are suited to Korea. Given the focus on species abundances and distributions in previous nationwide surveys in Korea, surveys of habitats, ecosystems, and ecoregions are required to more effectively protect biological resources in Korea. Furthermore, their spatial distributions should be mapped using periodical satellite images and aerial photographs. In particular, satellite images can be used to survey species, habitats, and ecosystems. Natural resources monitoring and management specialists are needed to collect various data and improve survey results. The participation of community volunteers is also important to develop an awareness in local residents of natural environment conservation. Independent survey institute (i.e., a 'National Ecosystem Institute') should be established to develop a database and survey scheme for species, habitats, and ecosystems throughout Korea. Moreover, the survey institute could develop natural environmental policy through the data analysis to meet the objectives of the Convention on Biological Diversity. The establishment of a survey institute will allow the completion of a natural environment survey that considers various factors, including physical habitat conditions. This will allow us to detect subtle changes in species abundance and spatial distributions and provide accurate and timely information on natural environments.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.21-26
• /
• 2008

A multi-geophysical surveys were carried out at Hwasan caldera which is located in Euisung Sub-basin. In order to overcome the limitation of the previous studies, dense gravity data and magnetotelluric (MT) data were obtained and integrated. In this study, the independent inversion models from gravity and MT method were integrated using a correlation and classification approaches to map geologic structure. The results of integration analysis indicated followings; 1) pyroclastic rocks around the central area of Hwasan caldera have lower density and resistivity when compared with those of neighborhood regions and are extended to around 1 km in depth, 2) the high resistivity and density intrusive igneous rocks are imaged around the ring fault boundary, and 3) the basement structure, which has low resistivity and high density, 5 km deep inferred by integration analysis. Also, for integration analysis, we suggested Structure Index method. This method is analyzed using Type Angle and Type Intensity, which are calculated by the spatial correlation of the physical properties. In this study, we can perform the integration analysis effectively using Structure Index method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1088-1096
• /
• 2006

The purpose of this study was to identify the service encounter blueprint by types of restaurants in order to manage moment of truth when customers who visit a restaurant encounter services. The service encounter blueprint gives an overall picture of the service provision to visualize an entire service process and its integrated structure. The blueprint is used for service process analysis technique. The random samples of 15 customers were observed by types of restaurants and the records were collected for three-days' observation. Interviews were performed by 3 managers, 3 service encounter employees, 3 cashiers, 3 cooks and 10 customers by types of restaurants. After drawing the first service blueprint, it was revised by the interview with the 3 managers and 6 service encounter employees. In this paper, restaurant service processes are reviewed and analyzed. By use of service blueprint, the processes are analyzed to find a fail point, customer wait, employee decision. As a result of making a blueprint of service encounter by types of restaurant, blueprints of fine-dining restaurants and family restaurants were similar, while fast-food restaurants showed a little difference. In particular, difference was indicated in a point where interaction of service encounter occurred. Difference was indicated depending on types of restaurants. Therefore, the efforts to improve this problem were needed. The blueprint is a map or flowchart (called a process chart in manufacturing) of all transactions constituting the service delivery process. The results showed that service encounter blueprint can be used to improve the service process in the restaurant's encounter.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.70-81
• /
• 2020

Point-by-point data, which is abundantly collected by vehicles with embedded GPS (Global Positioning System), generate useful information. These data facilitate decisions by transportation jurisdictions, and private vendors can monitor and investigate micro-scale driver behavior, traffic flow, and roadway movements. The information is applied to develop app-based route guidance and business models. Of these, speed data play a vital role in developing key parameters and applying agent-based information and services. Nevertheless, link speed values require different levels of physical storage and fidelity, depending on both collecting and reporting intervals. Given these circumstances, this study aimed to establish an appropriate collection interval to efficiently utilize Space Mean Speed information by vehicles with embedded GPS. We conducted a comparison of Probe-vehicle data and Image-based vehicle data to understand PE(Percentage Error). According to the study results, the PE of the Probe-vehicle data showed a 95% confidence level within an 8-second interval, which was chosen as the appropriate collection interval for Probe-vehicle data. It is our hope that the developed guidelines facilitate C-ITS, and autonomous driving service providers will use more reliable Space Mean Speed data to develop better related C-ITS and autonomous driving services.