• 대한통합의학회지
• /
• 제7권2호
• /
• pp.39-47
• /
• 2019

Purpose : This study was investigated effects of vibration on scapular winging of knee push-up plus exercise. Methods : Twenty-eight female subjects with scapular winging were evaluated after performing knee push-up plus exercise, with or without vibration, three times a week for four weeks. Muscle activation of the serratus anterior and upper trapezius, and the ratio of activation of the upper trapezius to serratus anterior were measured using surface EMG; and scapular winging length was measured by using the caliper. Results : The findings showed that knee push-up plus exercise -with and without- vibration induced a significant increase in muscle activation of serratus anterior (p<.05) and a significant decrease in muscle activation of the upper trapezius (p<.05), the ratio of muscle activation of the upper trapezius to the serratus anterior (p<.05) and scapular winging length (p<.05). There was also a significant difference in muscle activation of the serratus anterior (p<.05) and upper trapezius (p<.05) between control and experimental group at post-test. Conclusion : This study suggests positive clinical effects of knee push-up plus exercise with vibration which enhanced muscle activation of serratus anterior and reduced muscle activation of upper trapezius in person with scapular winging. However, vibration had no effectiveness to improve muscle imbalance between serratus anterior and upper trapezius, and reduce the scapular winging length.

• 대한통합의학회지
• /
• 제9권4호
• /
• pp.85-89
• /
• 2021

Background : Klippel-Trenaunay-Weber syndrome (KTS) is a rare congenital medical condition characterized by complex vascular malformation. KTS consists of a classic triad of capillary malformation (hemangioma), venous malformations and bone or soft tissue hypertrophy causing limb asymmetry. The aim of this report is to describe management for gait disturbance and foot pain in a Patient with KTS using custom-made total contact insole. Case presentation : A 32-year-old man with KTS presented with a 3-year history of gait disturbance on hard surface due to right first toe pain and Achilles tendon tightness. The patient had soft tissue hypertrophy, varicose veins and port-wine stains over the right lower limb associated with KTS. True leg length discrepancy was 2 cm. We prescribed custom-made total contact insole to protect his deformed foot and correct leg length discrepancy. The insole of right side included wedge shaped heel lift and the insole of left side included full length lift to add extra support on unaffected side. Also, we provided compression stocking and physiotherapy including manual lymphatic drainage for lymphedema and stretching exercise for tightness in right lower extremity. At 3 years follow-up, postural alignment including pelvic obliquity was improved using a custom-made total contact insole. The degree of scoliosis and foot pain were also reduced. Conclusion : An individualized and multidisciplinary approach is essential regarding the complexity of comorbidities in patients with KTS. For patients with KTS, orthotic management should be considered to prevent and correct deformities related to KTS. Active orthotic management, compression stocking and physiotherapy can enhance the quality of life and function in patients.

• 대한통합의학회지
• /
• 제8권4호
• /
• pp.125-131
• /
• 2020

Purpose : Lower extremity orthoses have been used as conservative methods to recover gait of the stroke patients. The purpose of this study is to examine how newly designed pelvic belt orthosis can improve gait ability and dynamic balance of adults with Hemiparesis after stroke. Methods : 22 patients who had hemiparesis after stroke participated in this study. Two groups were randomly created by assigning 10 subjects to the experimental group and the rest of the 12 subjects to the control group. The control group was treated by conventional physical therapy and occupational therapy. Identical therapy protocols were used to treat the experimental group who were assigned to wear the pelvic belt orthosis during post measurement. This study has a group of independent variables including group, gender, age, height, MAS, lesion side, cause and a group of dependent variables including gait speed, cadence, step length, stride length, and dynamic balance. The GAITRite system was used to measure spatial-temporal gain parameters and the balance system SD to measure dynamic balance. The data was analyzed using R version 3.3.1. Random forest, boosting algorithm, and MANOVA test were conducted to determine the effects of independent variables on dependent variables. Results : This study has a group of independent variables including group, gender, age, height, MAS, lesion side, cause and a group of dependent variables including gait speed, cadence, step length, stride length, and dynamic balance. The independent variable "group" has the most important value, which is approximately 25.42 (%IncMSE) representing a value three times greater than the second important predictor "height." Conclusion : As a result of this research, the hypothesis is validated with conclusion that Pelvic Belt orthosis could be effectively used for improving gait ability and balance of the patients with post-stroke hemiparesis.

• 한국운동역학회지
• /
• 제32권1호
• /
• pp.31-36
• /
• 2022

Objective: The purpose of this study was to investigate muscle activation according to the four strap lengths in the TRX plank exercise to provide scientific and accurate data on effective training methods. Method: Twenty healthy men who had at least 6 months of weight training experience and could fully adjusted plank exercise, were participate in this study (age: 25.2 ± 3.7 yrs., height: 174.2 ± 3.9 cm., weight: 71.2 ± 9 kg). To pursue the study purpose, surface electrodes were attached to trunk muscles (pectoralis major, rectus abdominis, external oblique, internal oblique, erector spinae, latissimus dorsi) and lower extramity muscles (gluteus maximus, rectus femoris, gastrocnemius), and the muscle activity was measured using 11-channel electromyography equipment. In order to verify the muscle activation according to the four strap lengths during TRX plank exercise, an one-way ANOVA with repeated measure was used with statistical significance level set at as α=.05. Results: First, there were statistically significant differences in pectoralis major, rectus abdominis, external oblique, internal oblique, and erector spinae among TRX strap lengths. Second, there were statistically significant differences in gluteus maximus, rectus femoris, and gastrocnemius among TRX strap lengths. Third, even though no statistically significant difference found in latissimus dorsi, but increased muscle activation tendency was showed as the length of the strap increased. Conclusion: From the results of this study, it may be possible that TRX exercise prevent injuries and improve lower extremity muscle as well as trunk muscles by setting appropriate length of strap.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.427-440
• /
• 2024

This study concentrates on the 301 comprehensive caving working face, notable for its considerable mining height. The roof model is established by integrating prior geological data and the latest borehole rock stratum's physical and mechanical parameters. This comprehensive approach enables the determination of lithology, thickness, and mechanical properties of the roof within 50 m of the primary mining coal seam. Utilizing the transfer rock beam theory and incorporating mining pressure monitoring data, the study delves into the geometric parameters of the direct roof, basic roof movement, and roof pressure during the initial mining process of the 301 comprehensive caving working face. The direct roof of the mining working face is stratified into upper and lower sections. The lower direct roof consists of 6.0 m thick coarse sandstone, while the upper direct roof comprises 9.2 m coarse sandstone, 2.6 m sandy mudstone, and 2.8 m medium sandstone. The basic roof stratum, totaling 22.1 m in thickness, includes layers such as silty sand, medium sandstone, sandy mudstone, and coal. The first pressure step of the basic roof is 61.6 m, with theoretical research indicating a maximum roof pressure of 1.62 MPa during periodic pressure. Extensive simulations and analyses of roof subsidence and advanced abutment pressure under varying working face lengths. Optimal roof control effect is observed when the mining face length falls within the range of 140 m-155 m. This study holds significance as it optimizes the working face length in thick coal seams, enhancing safety and efficiency in coal mining operations.

• Advances in nano research
• /
• 제16권5호
• /
• pp.473-487
• /
• 2024

The current study employs the nonlocal Timoshenko beam (NTB) theory and von-Kármán's geometric nonlinearity to develop a non-classic beam model for evaluating the nonlinear free vibration of bi-directional functionally-graded (BFG) nanobeams. In order to avoid the stretching-bending coupling in the equations of motion, the problem is formulated based on the physical middle surface. The governing equations of motion and the relevant boundary conditions have been determined using Hamilton's principle, followed by discretization using the differential quadrature method (DQM). To determine the frequencies of nonlinear vibrations in the BFG nanobeams, a direct iterative algorithm is used for solving the discretized underlying equations. The model verification is conducted by making a comparison between the obtained results and benchmark results reported in prior studies. In the present work, the effects of amplitude ratio, nanobeam length, material distribution, nonlocality, and boundary conditions are examined on the nonlinear frequency of BFG nanobeams through a parametric study. As a main result, it is observed that the nonlinear vibration frequencies are greater than the linear vibration frequencies for the same amplitude of the nonlinear oscillator. The study finds that the difference between the dimensionless linear frequency and the nonlinear frequency is smaller for CC nanobeams compared to SS nanobeams, particularly within the α range of 0 to 1.5, where the impact of geometric nonlinearity on CC nanobeams can be disregarded. Furthermore, the nonlinear frequency ratio exhibits an increasing trend as the parameter µ is incremented, with a diminishing dependency on nanobeam length (L). Additionally, it is established that as the nanobeam length increases, a critical point is reached at which a sharp rise in the nonlinear frequency ratio occurs, particularly within the nanobeam length range of 10 nm to 30 nm. These findings collectively contribute to a comprehensive understanding of the nonlinear vibration behavior of BFG nanobeams in relation to various parameters.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.879-887
• /
• 2003

The flow in a parallel walled test channel, when obstructed with a geometry at the entrance, can be forward, reverse and stagnant depending on the position of the obstruction. This interesting flow phenomenon has potential benefit in the control of energy and various flows in the process industry In this experiment, the flat plate obstruction geometry was used as an obstruction at the entry of the test channel. The parameters that influence the flow inside and around the test channel were the gap (g) between the test channel and the obstruction geometry, the length (L) of the test channel and the Reynolds number (Re). The effect of the gap to channel width ratio (g/w) on the magnitude of the velocity ratio (V$\_$i/ / V$\_$o/ : velocity inside/ velocity outside the test channel) was investigated for a range of Reynolds numbers. The maximum reverse flow observed was nearly 20% to 60% of the outside velocity for Reynolds number ranging from 1000 to 9000 at g/w ratio of 1.5. The maximum forward velocity inside the test channel was found 80% of the outside velocity at higher g/w ratio of 8. The effect of the test channel length on the velocity ratio was investigated for different g/w ratios and a fixed Reynolds number of 4000. The influence of the Reynolds number on the velocity ratio is also discussed and presented for different gap to width ratio (g/w). The flow visualisation photographs showing fluid motion inside and around the test channel are also presented and discussed.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1139-1146
• /
• 2000

본 논문에서는 PCS, IMT-2000 등 기지국용 원편과 안테나의 구현을 위해 임의의 실험주파수(1.575GHz)에서 새로운 구조의 반사판 부착 원편과 다이폴 안테나를 고안, 설계.제작하였고 물리광학근사법(Physical Optics, 이하 PO라 약칭)을 이용하여 방사패턴을 계산, 비교하였다. 설계된 안테나는 두 개의 다이플 소자를 반사판으로부터 λ/4(λ:파장,190.4mm)높이에 상호 수평.수직으로 직교시켰으며 수직 다이플 소자 중 λ/4 소자 하나를 반사판으로부터 λ/8 높이에 위치시키고 각 방사고자의 길이 조정에 의한 임피던스 차로 원편과 츨력을 얻었다. 제특성 측정결과 설계(중심)주파수에서의 반사손실 18.4dB, 반사손실 10dB 이하의 대역폭 360 MHz(22.8%), 축비 2dB 이하 대역폭 20MHz, HPMW 76$^{\circ}$,축비 2dB 이하 빔폭 58$^{\circ}$,축비 1.7dB로 양호한 우선원편파 특성이 얻어졌으며 PO에 의한 방사패턴 계산결과와도 잘 일치함을 확인하였다.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.613-625
• /
• 2015

This research was conducted to provide basic data to improve expressivity required for virtual clothing to replace actual clothing. For the experiment, 6 materials were selected and 12(2 kinds of length) actual flared skirts were made. At the same time, simulations were carried out on OptiTex Runway 12.0 for 36(12 kinds of skirts $\times$ KES, FTU, KES weight/10) kinds of virtual flared skirts, which were applied with the measured property values (thickness, weight, bending, shear, friction, and stretch). Also, the study compared and analyzed the wearing images, silhouette overlapping images, and skirt length measurements of the actual and virtual skirts put on a dummy. As a result, the actual skirts showed clear distinction for each material. In contrast, virtual 1 and 2 expressed fabric 3 in the most similar way, but could not recreate the uniform, soft, and natural flare shape of the actual skirts in general. Virtual 3 formed natural flares as those of the actual skirts, and expressed fabric 1, 5, and 6 in a similar way. However, virtual 3 had too much volume and barely showed any distinction for each material. All of virtual 1, 2, and 3 expressed different flare shapes on the front and back sides of the skirt similarly to the actual skirts, and had a good visual expression for the color and texture of the materials. However, they could not effectively express the elasticity and fabric sagging in the bias direction.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.