• 대한물리의학회지
• /
• 제7권1호
• /
• pp.87-94
• /
• 2012

Purpose : The purpose of this study was to examine the feasibility and efficiency of balance training program through an interactive video game regimen in people with chronic stroke. Methods : Thirty patients with chronic hemiparetic stroke were recruited. Participants were randomly assigned to either a control group (n=15) or an experimental group (n=15). The control group received the general physical therapy including of strengthening and balance exercise five times a week whereas the experimental group received a program of balance exercise with video game play based on virtual reality as well as the same typical physical therapy. The experimental group received 6 sessions for four weeks. Each session was given 5 minutes. An interactive computer game exercise regimen lasted 30 minutes without rest periods. Outcome measures for weight transfer to paretic side, non-paretic side and sit-squat-speed, sit-squat-length, sit-to-standspeed and sit-to-stand-area for the control group (n=15) and experimental group (n=15) before and after treatment were obtained by using the biorescure. Results: Outcomes demonstrated significant improvement in the experimental group compared with the control group in weight transfer to paretic side, non-paretic side and sit-squat-speed, sit-squat-length, sit-to-stand-speed. No significant training effect was showed in sit-to-stand-area between pretraining and post-training. Conclusion : An interactive computer game exercise based on task oriented approach for balance in chronic stroke were feasible. In other words, This regimen resulted in a greater improvement in dynamic balance for people with chronic stroke.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권6호
• /
• pp.454-458
• /
• 2009

가상 환경 표현의 기술은 실물의 정확한 표현보다는 화면 안에 잘 보일 수 있는 형태로 묘사되어 왔다. 컴퓨터 그래픽스 기술의 발전으로 다양한 분야에서 컴퓨터그래픽스 물체 표현의 활용이 증대함에 따라서 단지 가시화의 기능 뿐 아니라 정확한 측정 정보를 요구하는 응용이 늘고 있다. 본 논문에서는 가상세계에서 정확한 측정 정보를 제공할 수 있도록 물리적 단위 체계를 적용할 수 있는 방법을 제안한다. 본 논문에서의 물리적 단위 속성의 명세는 웹에서의 3D 구현 기술인 X3D를 기반으로 정의하였다. 물리적 속성 중에서 X3D 장면 내에서 물리적 길이 속성을 정의하는 노드의 구성에 대하여 기술하고, 길이 외의 질량, 시간, 온도 등과 같은 다양한 물리적 속성의 단위를 국제 단위체계인 SI 단위계 (International System of Units)를 기반으로 각 객체에 정의할 수 있는 방법에 대하여 기술한다.

• PNF and Movement
• /
• 제17권2호
• /
• pp.215-222
• /
• 2019

Purpose: The objective of this study was to investigate whether augmented low-dye taping treatment, which consists of low-dye, reverse-six, and calcaneal-sling taping, is effective in alleviating the collapse of the medial longitudinal arch, which is used for physical balancing during one leg standing. Methods: The subjects comprised 27 students in their 20s whose navicular bone height was lowered by 10 mm or more when evaluated using the navicular drop test. Those with interference factors like deformities, fractures, or traumas were excluded. Frequency-division multiplexing was used to measure one leg standing, and the method to avoir the average each time after 3 times of measurement was applied. Results: Significant differences in the center of pressure (COP) path length, COP average velocity, and forefoot force were observed during left leg standing (p<0.05), but for right leg standing, only changes in forefoot force were noted. Conclusion: Based on the changes to the non-dominant leg in terms of COP path length, COP average velocity, and forefoot force, the immediate effect of augmented low-dye taping, which combines three types of anti-pronation taping, on one leg standing balance in people with flat feet was confirmed.

• 대한물리치료과학회지
• /
• 제5권4호
• /
• pp.809-816
• /
• 1998

This study was conducted to evaluated the effects adding continuous passive motion(CPM) each day to the entire postoperative program of patients who received a total knee replacement(TKR). A retrospective chart review was completed for 31 patients(12 with bilateral involvement, totaling 44 knees)who received a TKR between 1996 and 1998. The data analysis compared the following variables for 28 patients who received CPM and 16 patients who received no CPM: the length of hospital stay(LOS), the frequency of postoperative complications, the number of post-operative days(PODs) range of motion (ROM). The CPM Group showed significant decreases in the frequency of complication(p<0.05), the LOS(p < 0.05), and No difference was demonstrated in the ROM of the two groups. We concluded that CPM was an effective adjunct to physical therapy care of patients undergoing total knee replacement.

• The Journal of Korean Physical Therapy
• /
• 제12권2호
• /
• pp.49-55
• /
• 2000

The purpose of this study was to identify the characteristics oi gait patterns and to find the effects of the gait function on the P.N.F. pelvic pattern. The subjects of this study were 40 hemiplegic patients who either hospitalized in or out patients at department physical therapy, Tae-Bong hospital and Masan college health education center. The study on these patient were done from July 20.1999 through May 10,2000. Method of gait pattern assessment used ink foot print record. The results were as follows: 1. There were significiant difference in cadence and stride length(p<0.05). 2. There were significiant difference in gait velocity (p<0.05).

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.418-424
• /
• 2019

백팩은 한쪽 어깨에 매는 가방에 비해 척추에 대칭적으로 무게분산이 가능하지만, 무게중심이 뒤쪽으로 이동하게 하여, 체간이 전방굴곡되는 자세 변형을 야기한다. 본 연구는 모멘트팔의 길이차이에 따른 가방 착용 시 균형과 보행에 미치는 영향에 대해 확인하였다. 정형외과적 손상 및 신경학적 손상이 없는 정상 성인 30명을 대상으로 하였다. 대상자는 1) 백팩 미 착용, 2) 일반적인 백팩, 3) 모멘트 길이를 감소시킨 백팩의 3가지 조건에서 각각 균형 및 보행을 측정하였다. 자세동요면적과 속도에서 백팩 미착용과, 일반적인 백팩, 특수 백팩의 3가지 조건에 따른 유의한 차이가 있었으나, 백팩의 모멘트팔의 길이에 따른 유의한 차이는 없었다. 양하지 지지기와 보행속도는 백팩 미착용과, 일반적인 백팩, 특수 백팩의 3가지 조건에서 유의한 차이가 있었으며, 양하지 지지기에서만 백팩의 모멘트팔의 길이에 따른 유의한 차이가 있었다. 본 연구의 결과를 통해 백팩 착용시 모멘트팔의 길이 변화가 보행에 도움이 될 수 있었다.

• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.135-145
• /
• 1988

본(本) 연구(硏究)는 재료(材料)의 배합(配合)이 단순한 mortar를 제작 그 균열발생을 관찰, 측정하여 정적하중(靜的荷重)에 의한 균열 및 일정진폭을 갖는 동적하중(動的荷重)에 의한 균열성장영역 예측을 시도한 것이다. 사용시편은 mortar의 배합비(配合比)와 물-시멘트비(比)를 달리하여 ASTM E 561-80에서 제안한 CLWL-DCB(crack-line-loaded-double-cantilever-beam)의 제1방법인 벽개형(劈開型)모드(opening mode)에 의거 균열성장거동을 측정하였다. 본(本) 실험(實驗)에서는 X-Y recorder에 나타난 하중(荷重)(P)-균열개구변위($2V_1$), 균열개구변위($2V_1$)-균열선단개구변위($2V_2$)의 diagram을 해석하여 정적하중(靜的荷重)에 의한 균열선단의 비선형적인 미소균열을 포함하는 유효균열길이(effective crack length; $a_e$)와 균열선단의 미소균열을 제외한 물리적균열길이(physical crack length; $a_m$) 및 replica 필름으로 구한 균열길이(replica crack length; $a_t$)의 상관관계와 일정진폭을 갖는 반복하중에 의한 $a_e$, $a_m$, $a_t$를 구하여 정적하중(靜的荷重)에 의한 균열특성과 동적하중(動的荷重)에 의한 균열특성을 조사한 것이다.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.45-61
• /
• 1988

The purpose of this study is to develop regression equations between annual specific sedi- ment of reservoirs and physiographic factors of watersheds. 122 irrigation reservoirs, which have irrigation areas equal to or larger than 200 ha, located in Korea except Cheju province are used in the analysis. Simple regression analyses between the specific annual sediment and each of the physical characteristic factors of the reservoirs are carried out at first. Then, multiple regression analyses between the annual specific sediment and the physical characteristic factors with high correlation coefficients in the simple regression analyses are made. The results obtained from this study are as follows : 1. The results of the sirnple regression analyses show that in each province the watershed area, the length of mainstream, the circumferential length of watershed have high cor- relation coefficients (R=0.814-0.986), and that drainage density, reservoir capacity per watershed area, drainage frequency, basin relief have low correlation coefficients (R=0. 387-0.955). 2. The purposed multiple regression equations between the annual specific sediment of reservoirs and three major characteritic factors of watersheds, namely, the watershed area, the circumferential length of watershed, and the length of mainstream, are proposed as given in Table 2. 3. The result of the simple regression analyses with respect to the reservoir elevation except Jeonnam province, which has very different characteristics comparing to other provinces, shows that watershed area, main stream length and circumferential length have high correlation coefficients (R=0.806-0.884) in low-elevation reservoirs and intermediate- elevation reservoirs, but low correlation coefficients (R=0.639-0.739) in high-elevation reservoirs. 4. With respect to the reservoir elevation, the proposed multiple regression equations bet- ween the annual specific sediment of reservoirs and the three major characteristic factors of watershed which have high correlation coefficients are proposed as given in Table 5.

• 소프트웨어공학소사이어티 논문지
• /
• 제26권1호
• /
• pp.1-16
• /
• 2013

가변 길이 정보 메시지는 컴퓨터 네트워크 시스템을 통하여 효율적인 정보 제공을 하기 위하여 개발된 통신 프로토콜 표준이다. 이러한 가변 길이 정보 메시지는 정보 수신자의 정보 요구 수준 및 정보 수신자의 정보 접근 수준에 따라 정보의 상세함을 가변적으로 조절 할 수 있도록 설계된 메시지이다. 정보 메시지 최적화 기술은 정보 메시지를 다양한 데이터 압축 기술을 사용하여, 메시지 전체의 물리적인 사이즈를 줄이려고 노력하였다. 정보 메시지 최적화에서는 정보의 정확성을 최우선으로 고려하고 있어, 최적화 전/후가 동일한 비손실 압축 기법을 응용하여 사용하고 있다. 하지만, 이러한 비손실 압축 기법만을 사용하면, 압축효율성이 현저하게 떨어져, 제한된 대역폭을 갖는 무선 네트워크 환경에서의 효율적인 전송이 이루어지지 않는다. 본 논문에서는 가변 길이 정보 메시지를 대상으로, 메시지 필드 단위로 정보의 최적화를 수행하여 메시지의 길이를 물리적으로 좀 더 효과적으로 최적화하도록 시도하였다. 또한, 본 논문에서 제시한 최적화 방법의 효율성을 보이기 위하여, 가변 길이 정보 메시지에 대한 최적화 실험을 수행하였다.

• 복식문화연구
• /
• 제12권3호
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.