• Advances in concrete construction
• /
• v.9 no.6
• /
• pp.569-576
• /
• 2020

Employment of the wave propagation approach with the combination of Pasternak foundation equation gives birth to the shell frequency equation. Mathematically, the integral form of the Lagrange energy functional is converted into a set of three partial differential equations. A cylindrical shell is placed on the elastic foundation of Pasternak. For isotropic materials, the physical properties are same everywhere, whereas the laminated and functionally graded materials, they vary from point to point. Here the shell material has been taken as functionally graded material. The influence of the elastic foundation, wave number, length and height-to-radius ratios is investigated with different boundary conditions. The frequencies of length-to-radius and height-to-radius ratio are counter part of each other. The frequency first increases and gain maximum value in the midway of the shell length and then lowers down for the variations of wave number. It is found that due to inducting the elastic foundation of Pasternak, the frequencies increases. It is also exhibited that the effect of frequencies is investigated by varying the surfaces with stainless steel and nickel as a constituent material. MATLAB software is utilized for the vibration of functionally graded cylindrical shell with elastic foundation of Pasternak and the results are verified with the open literature.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.3
• /
• pp.309-314
• /
• 2016

Objective: There are no guidelines for choosing appropriate gait assistive devices. The aim of this study was to evaluate gait assistive devices in patients with Parkinson's disease. Method: We evaluated 15 individuals with Parkinson's disease who did or did not use one of two different devices including canes and two-wheeled walkers. Data were collected using the GAITRite system. Results: Participants in the group using canes and two-wheeled walkers had significantly increased double support time and decreased gait velocity, normalized gait velocity, and stride length compared with those who did not. Participants who used a two-wheeled walker had significantly decreased gait velocity, normalized gait velocity, and stride length compared with those who used a cane. Furthermore, participants who used a two-wheeled walker had significantly decreased coefficients of variation for step time, stride length, and swing time compared with those who used a cane. Conclusion: Our results indicated that the two-wheeled walker offered the most consistent advantages for decreasing the risk of falling.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.2
• /
• pp.45-57
• /
• 2018

Purpose : This study was conducted to evaluate the effects of an task oriented training program combined with action-observation on balance and gait ability of patients with chronic stroke. Method : The subjects of this study were 30 patients with hemiplegia who agreed to participate and were picked up. Participants were randomly divided into equal groups; namely, an experimental group that underwent task oriented training combined with action-observation for at least 30 minutes/day for 6 weeks and a control group that underwent general task-oriented training. Patients' balance was assessed using the Sway Length, Sway Area and Limit of Stability test. In addition, gait ability was assessed using the 10 Meter Walking Test to measure the taken to walk 10 meters. Gait time and speed taken to walk 10 meters were used to examine gait ability. Results : There were significant improvements in the subscales of the balance and gait ability test of those who participated in the action-observational training program, while the control group showed only significant changes in the evaluation items of the sway length in eyes opened condition and gait time. Conclusion : Therefore, Action-observational training program effectively improved the balance and gait ability in patients with stroke.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.27-35
• /
• 2001

Four different sources of wood-fibers from Eucalyptus, Italian poplar, hemlock, and mixed species fibers were used to study the influence of their fiber characteristics on the performance of medium density fiberboard (MDF) panels bonded with both urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives. Included fiber characteristics were fiber length, size distribution, bulk density, and acidity. Physical and mechanical properties of MDF panels manufactured by dry process using these different fibers were determined for the comparison of board performance. Two hardwood species had a large fraction of short fibers resulting in a higher bulk density while very long hemlock fibers had lower bulk density. Fiber acidity was revealed to strongly affect the internal bond (IB) strength of MDF panels bonded with UF resins. MDF panels made from mixed species fibers showed highest IB strength of all panels prepared. UF-bonded MDF panels showed poor dimensional stability. In conclusion, the present study showed that wood-fiber characteristics such as fiber length, bulk density, and acidity affect the performance of MDF boards, and also suggested that fiber characteristics be considered for MDF panel manufacture.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.196-201
• /
• 2011

Near-field properties of light emanated from a subwavelength double slit of finite length in a thin metal film, which is essential for understanding fundamental physical mechanisms for near-field optical beam manipulations and various potential nanophotonic device applications, is investigated by using a three-dimensional finite-difference time-domain method. Near-field intensity distribution along the propagation direction of light after passing through the slit has been obtained from the phase relation of transverse electric and magnetic fields and the wave impedance. It is found that the near field of emerged light from the both slits is evanescent, that is consistent with conventional surface plasmon localization near the metal surface. Due to the finite of the slit, the amplitude of this evanescent field does not monotonically approach to than of the infinite slit as the slit length increases, i.e. the near-field of the longer slit along the center line can be weaker than that of the shorter one.

• Women's Health Nursing
• /
• v.24 no.1
• /
• pp.24-32
• /
• 2018

Purpose: To determine traits related to pregnancy and delivery, length of stay, health care cost, postpartum discomfort, and satisfaction with medical service of puerperas giving birth in midwifery clinic and hospitals. Methods: This study used a comparative survey design. Data were collected from a total of 140 postpartum mothers composed of 70 mothers who gave births in two hospitals and another 70 mothers who delivered in one midwifery clinic. Results: Delivery in midwifery clinic had higher Apgar score at 1 minute and 5 minutes after birth than hospital. Those who delivered in midwifery clinic had shorter stay in the clinic, fewer health care cost, less postpartum discomfort in physical, environmental, social, and cultural areas, higher satisfaction with medical services than those who delivered in hospitals. Conclusion: Results of this study can be used as a basis for studies on giving birth in midwifery clinic and hospitals. They might increase the autonomy of women in giving birth with positive effect on the delivery experience of the mother and her spouse.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.291-303
• /
• 2023

Selfies are a popular form of photography. However, due to physical constraints, the compositions of selfies are limited. We present algorithms for creating virtual portraits with interesting compositions from a set of selfies. The selfies are taken at the same location while the user spins around. The scene is analyzed using multiple selfies to determine the locations of the camera, subject, and background. Then, a view from a virtual camera is synthesized. We present two use cases. After rearranging the distances between the camera, subject, and background, we render a virtual view from a camera with a longer focal length. Following that, changes in perspective and lens characteristics caused by new compositions and focal lengths are simulated. Second, a virtual panoramic view with a larger field of view is rendered, with the user's image placed in a preferred location. In our experiments, virtual portraits with a wide range of focal lengths were obtained using a device equipped with a lens that has only one focal length. The rendered portraits included compositions that would be photographed with actual lenses. Our proposed algorithms can provide new use cases in which selfie compositions are not limited by a camera's focal length or distance from the camera.

• PNF and Movement
• /
• v.20 no.1
• /
• pp.59-66
• /
• 2022

Purpose: The aim of this research was to verify the relationship between three-dimensional (3D) ground reaction force (GRF) and severity of leg length discrepancy (LLD) while walking at a normal speed. It used a 3D motion analysis system with force platforms in standing workers with LLD. Methods: Subjects comprising 45 standing workers with LLD were selected. Two force platforms were used to acquire 3D GRF data based on a motion analysis system during gait. Vicon Nexus and Visual3D v6 Professional software were used to analyze kinetic GRF data. The subjects were asked to walk on a walkway with 40 infrared reflective markers attached to their lower extremities to collect 3D GRF data. Results: The results indicated the maximal force in the posterior and lateral direction of the long limb occurring in the early stance phase during gait had significant positive correlation with LLD severity (r = 0.664~0.738, p <0.01). In addition, the maximal force medial direction of the long limb occurring in the late stance phase showed a highly positive correlation with the LLD measurement (r = 0.527, p <0.01). Conclusion: Our results indicate that greater measured LLD severity results in more plantar pressure occurring in the foot area during heel contact to loading response of the stance phase and the stance push-off period during gait.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.54-63
• /
• 2019

This study investigated on the compressive strength and the length change test with using the waste glass and graphene oxide for recycling the waste glass as the aggregate. Curing on 3-day and 7-day, the compressive strength was enhanced as the usage of waste glass was increased. Especially, the huge difference in the compressive strength was observed when the amount of substituting on the waste glass was used on 10~50%. With 50% of waste glass condition, the compressive strength was portionally enhanced as the usage of graphene oxide was increased and its value was 42.6 N/㎟ with 0.2% of graphene oxide. In terms of the length change test, the use of high content of waste glass led length change value to increase, but it was dropped down as the portion of waste glass was above 50%. Furthermore, in the case of using 50% of waste glass, the use of high amount of graphene oxide tended to decrease the length change value. That is, graphene oxide may contribute on boosting the cement hydration reaction and blocking the ion's movement.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.664-672
• /
• 2000

It is generally agreed that transesterification provides the, copolymer in the melt blending of poly(ethylene naphthalate) (PEN) and poly($\varepsilon$-caprolactone) (PCL). Effects of the conditions of transesterification reaction and catalyst on the degree of randomness and average sequence length of PEN/PCL blends were investigated and results were used to interpret the biodegradability of PEN/PCL blends. It was found that degree of randomness values of obtained copolymer lied between 0 and 1, and it indicated that this blend consisted with physical blends of PEN/PCL and PEN/PCL block copolymers. The degree of randomness reached almost 1 which is the theoretical value of random copolymers and the average sequence length became shorter by the further transesterification reaction. In additions, it was found that the increase of copolymers, especially random copolymers reduced the biodegradability in PEN/PCL blends.