• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.149-156
• /
• 2000

For the adsorption of polyelectrolyte at the surface of polyacrylamide gel particle, preferential adsorption of the large polyelectrolyte such as DNA is governed by the surface area of an adsorbent. The adsorption equilibrium constant can be varied by surface geometry of porous polymer, and it can be described as a function of ionic strength and surface area. Physical parameters affecting the adsorption were estimated using the theoretical governing equation of polyelectrolyte which electrophoretically moved along the column, and geometrical surface area was estimated by Waldman-Mayer's physical model. The separation of polyelectrolytes was studied using the physical parameters estimated by ionic strength and surface geometry.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.160-166
• /
• 2007

This study was performed to analyze the molecular structural and physical properties changes of modified rice starch, which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of rice starch after pulverization decreased 20% and increased 25%, respectively. Low molecular substances content in rice starch using GPC (gel permeation chromatography) increased from 36.5% to 59.5% after pulverizing of rice starch. Damaged starch contents in rice starch also increased from 16.4% to 99.2% after pulverizing of rice starch. Water holding capacity, solubility and transmittance of rice starch after pulverization increased compared to those of control. Apparent viscosity value of rice starch after pulverization decreased to 7% in control based on $30^{\circ}C$ and 20 RPM conditions.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.299-305
• /
• 2003

Physical properties and microstructure of new coumarin 4 doped $SiO_2$-PDMS ORMOSILs, synthesized by one-step (OS, acid-catalysis) and two-step (TS, acid-base catalysis) routes of sol-gel method with varying pH (0.6 to 7) and dye content $(5\;{times}\;10^{-4}\;to\;5{\times}\;10^{-2}\;mole)$, are reported. BET, UV-visible spectroscopy and SEM were used for characterizations. The increase in acid or base concentration increased the size of pores and aggregated silica particles. The samples with pH ≤ 2.5 were transparent and attributed to the small size of pores (~20 Å) and silica particles. The samples with pH > 2.5 were translucent or opaque due to non-uniform pore system formed by voids and large aggregated silica particles. The surface area was found a key factor controlling the interactions between the gel matrix and the dye. The OS samples with the highest dye concentration exhibited the minimal values of pore size, surface area and silica particle size, resulting in the concentration-quenching phenomenon.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.237-237
• /
• 2009

Zinc oxide (ZnO) thin film was deposited on Si substrates using polycrystalline (poly) 3C-SiC buffer layer, in which the ZnO film was grown by sol-gel method. Physical characteristics of the grown ZnO film was investigated experimentally by means of SEM, XRD, FT-IR (Furier Transform-Infrared spectrum), and AFM. XRD pattern was proved that the grown ZnO film on 3C-SiC layers had highly (002) orientation with low FWHM (Full width of half maxium). These results showed that ZnO thin film grown on 3C-SiC buffer layers can be used for various piezoelectric fields and M/NEMS applications.

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.43-46
• /
• 2012

A fluidized bed drying approach was utilized to the synthesis of water glass based silica aerogel powders. The effects of the fluidized bed drying conditions such as the superficial velocity and temperature of hot air and bead size as well as bead/wet-gel ratio, on the physical properties such as tapping density and productivity of the aerogel powders were systematically investigated. The experimental results showed that the amount of beads mixed with wet-gels in the fluidized bed column has the most profound impact on the fluidization efficiency, greatly enhancing the yield of the aerogel powders up to 98% with a proper bead/wet-gel weight ratio as compared to 72% without using beads. No significant change was observed in the tapping density over a wide range of the fluidized drying condition. Consequently the fluidized bed drying approach shows a good promise as an alternative route for the large-scale production of the aerogel powders.

• Journal of Pharmaceutical Investigation
• /
• v.3 no.1_2
• /
• pp.34-50
• /
• 1973

There are many reports on the stability of drugs in powders and tablets. The stabilities of ascorbic acid in the antacid preparations, such as calcium carbonate, magnesium carbonate, magnesium trisilicate, magnesium alumino silicate, and dried aluminum hydroxide gel under various humidities were examined. From the result of the experiment, it was assumed that the concentration of ascorbic acid, the amount of water-vapor sorption, and the physical character of the antacid ingredients were the main factors, influencing the degradation of ascorbic acid. The ascorbic acid, mixed with carbonates, such as calcium carbonate, was degradaded rapidly, while the preparation with dried aluminum hydroxide gel was slightly degraded after 10 days. A 2% ascorbic acid in the prepation was rapidly degraded than 10% ascorbic acid in the preparation.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.52-53
• /
• 2006

A new series of PEO-PPO-PEO and PPO-PEO-PPO copolymers having several hydroxyl groups on the PPO chain segment were synthesized, further modified with various poly(lactic acid) PLA oligomeric chains to confer physical stability after thermo-gelation in the body fluid. Gel stability was endowed by either increasing hydrophobic interaction between PLA chains or inducing stereocomplex formation between enatiomeric isomers of PLA chains. Macromolecular drugs were incorporated within the gels and their release patterns were investigated using Pluronic F127 as a control.

• Korean Journal of Pharmacognosy
• /
• v.25 no.2
• /
• pp.121-131
• /
• 1994

Two kinds of new lectins, CATL-I and CATL-II, were partially purified from the intestine of Chlorostoma argyrostoma turbunatum by physical saline extraction, salt fractionation, ion exchange chromatography and gel filtration. CATL-I and CATL-II were purified 39.4 and 15.8 fold with a yield of 8.8 and 7.4%, respectively. On polyacrylamide gel electrophoresis, CATL-I demonstrated one major and one minor bands. This lectin agglutinated human and other animal erythrocytes nonspecifically and also agglutinated murine splenic lymphocytes. Carbohydrate specificity of the lectins was determined by inhibition of the agglutinability by methyl-${\alpha}-_D$-galactopyranoside and $_L-rhamnose$ at a final concentration of 6 mM. The lectins contained relatively high amounts of acidic amino acids, but the contents of sulfur containing amino acids were very low or was not estimated. Immunochemical studies were carried out to identify some properties of marine animal lectins.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.244-248
• /
• 1988

Multilayer adsorption isotherms of nitrogen on hexagonal boron nitride, ${\gamma}$-alumina, and silica-gel powders are determined at the liquid nitrogen temperature using a gravimetric adsorption apparatus. The volume (V) of the adsorbed gas are plotted against the statistical thickness(t) of the adsorbed layer, and the t-method area are calculated from the slope of these V-t plots to compare with the BET area. A number of universal adsorption isotherms and the Frenkel-Halsey-Hill equation are used one after another in calculating the statistical thickness. The appropriateness of the FHH equation as an universal adsorption isotherm is discussed finally.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.237-238
• /
• 2002

Particle - bound water changes the physical and chemical properties of aerosol particles, such as size and light scattering properties. Consequently, it is necessary to remove water vapor from ambient aerosols before aerosol particles are sized and counted. Silicon gel diffusion dryer is commonly employed for this purpose. However, it can not be operated continuously While in operation, silicon gel becomes progressively more loaded with water and must periodically be regenerated by drying off the water. (omitted)