• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.488-501
• /
• 2008

The purpose of this study presents bra pattern using the 3D measurements of the upper body subject to women in their 30's. Brassieres available in the market are mostly designed for straight body shape and many women seem to have experienced bearing discomfort in a great extent as they grow older. Brassieres should be designed to cover diverse body types and the accurate measurement of body type and breast shape is needed to accomplish that. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The results of this study showed that the evaluation of experiment brassieres was excellent in every item, and the significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup part.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.395-402
• /
• 2012

This study has been conducted to design and implement smart phone-based application which can keep records effectively to improve athletes' ability. To boost their performance, they need to receive training as realistic as possible. As a way to do that, training should be performed with some fitness equipments, sporting apparatus, facilities, and conditions. However, it is also possible to improve their ability by motivating athletes with checking and recording their performance. This study ascertains that using scoring records actually motivates athletes when comparing the result of youth basketball team using the records keeping system with that of not using it. Accordingly, smart phone-based records keeping application has been designed and developed. Also, through a survey targeting athletic coaches who have used the system, training efficiency has been measured and it turns out that it actually motivates athletes to improve their abilities.

• Quality Improvement in Health Care
• /
• v.15 no.2
• /
• pp.107-120
• /
• 2009

Background : To estimate fall incidence rate and associated factors in inpatients from a general hospital. Method : The data were collected from 104 fall incident reports developed by the patient safety committee in a general hospital in Seoul from 01 January 2007 to 31 December 2008. Information included general characteristics of patients, factors related to fall, types, places, circumstances and outcomes of fall. Result : The incidence rate of fall, which was 4.4 per 1,000 total discharged patients and 0.5 per 1,000 patient-days, was much lower than that of several hospitals in the United States. The difference may reflect the different incidence reporting system of each hospital. Fall-prone patients were, in general, $$\geq_-$$65 years of age, had an alert mental status, were ambulatory with some assistance, and were dependent on and ambulatory device. High incidence of falls was associated with patients with circulatory disease. The majority of fall events usually occurred in bed or at the bedside in the patient's room, and occurred more often during the night than during the day or evening. Risk factors of fall were use of drugs (antihypertensive or neuropsychiatric drugs) and environmental factors (e.g., overly high bed height, surrounding objects, inadequate fitness shoes and slippery floor). Physical injury occurred in 43.3% of fall events, which typically required diagnosis of injury and treatment such as suturing. Risk factors for repeated falls were use of a neuropsychiatric drug (odds ratio=13.9) and gait disturbance (odds ratio=91.2). Risk factors for fall-related injury were alert mental status (odds ratio=3.3 times more likely to fall than those who were drowsy or in a stupor) and general weakness(odds ratio=3.3 times more likely to fall than those who were not generally weak). Conclusion : Medical and nursing staff should be aware of the fall risk factors of hospitalized patients and should intensively pursue preventative strategies. Development of fall prevention education based on these results is recommended.

• Journal of Korean Elementary Science Education
• /
• v.33 no.3
• /
• pp.491-509
• /
• 2014

The purpose of this study was to compare and analyze the elementary science curriculum of Finland, which ranked at the first place in the science domain of Programme for International Student Assessment (PISA), a comparative study on the academic achievements of OECD member nations, for three consecutive years and recorded a high national competitiveness index, and that of South Korea, thus providing information needed to develop curriculums and textbooks in the middle of occasional curriculum revisions and giving useful implications for the implementation of curriculum in the field of education in South Korea. The research findings were as follows: First, as for the science content areas based on the ratio of large area items according to the evaluation and analysis framework of TIMSS 2007, South Korea's ratio of life, chemistry, physics, and earth hardly showed fitness for TIMSS 2007 and exhibited equal distribution among the areas. In Finland, the ratio of life, chemistry, physical, and earth was similar to the fourth grade level of TIMSS 2007. The country showed differential distribution with life accounting for the highest percentage. Second, as for the cognitive domains, South Korea showed a high percentage in "Uses and Procedures of Tools" of "1. Knowing" and "Making Connections," "Comparison/Contrast/Classification," and "Uses of Models" of "2. Application." Finland recorded a high percentage in "Information Interpretation" of "2. Application." While South Korea focused on the uses and methods of scientific instruments during scientific activities, Finland made an approach with a focus on problems related to daily life such as the interpretation of information including reports and graphs from an interpretative perspective.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.800-805
• /
• 2000

In an effort to facilitate fabrication procedure of all ceramic crowns, a novel preparation method for all ceramic crown using alumina tape was developed. The alumina tape having a uniform thickness was cast by using Doctor blade method. The physical properties of newly introduced alumina tape has biaxial flexure strength of $500\sim600MPa$. The value of toughness is $3.18\sim3,28MPa.m^{1/2}$ which corelates with fracture and the linear shrinkage rate of the alumina tape is 0.44% during core production. The marginal fitness of the alumina tape all-ceramic restoration with $90{!`}$shoulder margin had average marginal discrepancy at $78.3{\S}$ > and average marginal gap at $44.4{\S}$ >. At the marginal preparation of $135{!`}$deep chamfer, the average marginal discrepancy at $82.1{\S}$ > and the average marginal gap at $40.2{\S}$ > had been reported. This fabrication procedure of all ceramic crowns with alumina tapes is easier and less technical sensitive for dental technicians. After restoration with new all ceramic crowns we followed the patients 2 years later, there were no complications as porcelain fractures or periodontal disease. We had good esthetic clinical results with new all ceramic crowns.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.635-643
• /
• 2007

As many engineers and technicians are involved in the design process of large scale and/or complex products, there are a lot of miss matches and interferences due to designers' faults and several kinds of CAD systems. Recently, CAD systems are applied to verify and check the assembly process. Digital Mock-Up(DMU) system, a tool to build a virtual mock-up in the design stage, has been used to prevent the interferences and miss matches during precision design processes. Using the virtual assembly tool, engineers are able to design precision and interference free parts without physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product. Several organizations are involved in the distributed design environment for heterogeneous multi-CAD assembly. XML and the lightweight CAD file are proposed for the multi-CAD assembly. XML data contains hierarchy of the heterogenenous multi-CAD assembly. STEP PDM schema and STEP ISO 10303-28 formations are applied to construct the XML data. The lightweight CAD file produced from various CAD files through ACIS kernel and InterOp not only contains mesn, B-Rep and topological data, but also is used to visualize CAD data and to verify dimensions. Developed system is executed on the desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Real-time interference and fitness checks, dimensional verification, and design and assembly verification are performed on the developed system. Assembly of heterogeneous models for a car is conducted to verify the effectiveness of the developed DMU system on the Internet.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.73-81
• /
• 2020

The purpose of this study was to analyze the recognition of 20s~30s' young people in marathon activities using Q methodology. P-sample was composed of 30 young marathoners. The selected Q samples were arranged in the normal distribution form. The collected data were analyzed by factor analysis through varimax rotation using QUANL 1.2PC program. Three distinct were emerged throughout the analysis: the first type is 'the type of giving special meaning.' which is improving their physical fitness, healthy and enjoying runner's high. The second type is 'the enjoying leisure' which is releasing stress and enjoying their common interest.' The last type is 'the type of enjoying crew activity.' which is enjoying marathon festival and managed their healthy and life. This result hints that young marathoners' sports culture trends.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.401-407
• /
• 2010

In this study, computer simulations were conducted to assess the use of a circulating concurrent-flow dryer for rapeseed drying and to determined the effect of this drying method on the germination ratio of rapeseed after the drying process was complete. The simultaneous heat and mass transfer between air and rapeseed in a concurrent-flow dryer was examined by simulation. The drying simulation was based on several parameters with sequent time series. Equations concerning air psychrometrics, physical properties, thermal properties, equilibrium moisture content, thin layer drying of rapeseed, etc. were all combined to solve the simulation models. Based on energy and mass transfer in the concurrent-flow drying model, a simulation program for the circulating concurrent-flow rapeseed dryer was built along with a detailed description of the mathematical solution to the model. A pilot scale circulating concurrent-flow dryer(200 kg/batch) was used to verify the fitness of the simulation program. A comparison between the experimental data and the model predicted results was presented and discussed. The drying parameters and germination ratio were analyzed and the accuracy of the simulation program was evaluated. The simulation program proved to be reliable and was shown to be a convenient tool for predicting rapeseed drying and germination ratio of rapeseed in a concurrent-flow dryer.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.6
• /
• pp.416-426
• /
• 2019

Objectives: In recent years, transboundary air pollution from mainland East Asia has led to growing concerns about air pollution in Japan. Air pollution is reportedly associated with the exacerbation of respiratory diseases. In this study, we assessed the effects of air pollution on respiratory symptoms and the health status of participants with and without chronic respiratory diseases. Methods: Participants (n=2753) with and without chronic respiratory diseases who visited healthcare facilities in Japan during February from 2010 to 2015 filled out a self-report questionnaire regarding their symptoms and perceived health status. Participants were followed up during April-May and June-July. Results: Oxidant concentrations were associated with respiratory symptoms, overall health, and quality of life (QoL). Suspended particulate matter (SPM) and particulate matter <$2.5{\mu}m$ levels were associated with physical fitness; SPM was also associated with QoL. Recent experience of an Asian sand dust event had a significant effect on allergic symptoms, change in health, and QoL. Conclusions: Respiratory symptoms were more strongly affected by oxidants than by other pollutants. Significant associations of air pollutants were found with a comprehensive range of items related to perceived health status, including overall health and QoL. Although the effects of air pollutants on respiratory symptoms and health status were more apparent among patients with respiratory diseases, the adverse effects of air pollutants were significant even among participants without such conditions.