• 한국통신학회논문지
• /
• 제32권12B호
• /
• pp.728-734
• /
• 2007

본 논문에서는 최소 구축비용의 물리적 다중 보안 등급 네트워크 설계를 위한 GOSST 휴리스틱 메커니즘을 제안한다. 다중 보안 등급 네트워크상에서 각 노드는 원하는 보안 등급으로 다른 노드와 통신할 수 있다. 이를 위해서는 불법적인 물리적 접근을 통제할 수 있는 방법이 필요하다. 이러한 네트워크를 최소비용으로 구축하기 위해 GOSST 문제를 적용한다. 이 문제는 NP-Hard 영역이므로 현실적인 해를 얻기 위해서는 적절한 복잡도의 휴리스틱이 필요하다. 본 연구에서는 최소 구축비용의 물리적 다중 보안 등급 네트워크의 설계를 위해, 우리의 이전 거리 직접 GOSST 휴리스틱을 변형한 GOSST 휴리스틱 메커니즘을 제안한다. 이것은 실험 비교 대상인 G-MST에 대하여 평균 29.5%의 구축비용 절감을 보였다.

• 한국시스템다이내믹스연구
• /
• 제13권3호
• /
• pp.23-46
• /
• 2012

The purpose of this paper is to estimate effects of healthy city policies on reducing social costs. The analyses were dune at the cities, counties, and communities levels in 2009, and covered Seoul Metropolitan Area(SMA). For estimation of reducing social costs, it developed a system dynamics(SD) model that analyzed causal relationships between physical inactivity rates, the number of deaths, medical expenses, and total social costs. Simulation period of SD was from 2009 to 2030. Three alternatives were proposed with combinations of length of bike lanes, number of bus routes, crime rates, self-reported good health status rates, and obesity rates. The total estimated cost of physical inactivities from 2009 to 2030 was 31.9 trillion won from the future forecast without policies. As a result of simulations with three alternatives, there were economic benefit approximately from 119.7 billion won to 1.16 trillion won. This study contributed to better understanding the economic benefits of healthy cities that were associated with design of built environment and physical activity. It also emphasized the importance of healthy cities planning as one of national welfare polices.

• ETRI Journal
• /
• 제21권4호
• /
• pp.9-22
• /
• 1999

This paper considers a problem of configuring both physical backbone and logical virtual path (VP) networks in a reconfigurable asynchronous transfer mode (ATM) network where links are subject to failures. The objective is to determine jointly the VP assignment, the capacity assignment of physical links and the bandwidth allocation of VPs, and the routing assignment of traffic demand at least cost. The network cost includes backbone link capacity expansion cost and penalty cost for not satisfying the maximum throughput of the traffic due to link failures or insufficient link capacities. The problem is formulated as a zero-one non-linear mixed integer programming problem, for which an effective solution procedure is developed by using a Lagrangean relaxation technique for finding a lower bound and a heuristic method exploited for improving the upper bound of any intermediate solution. The solution procedure is tested for its effectiveness with various numerical examples.

• 대한물리치료과학회지
• /
• 제7권1호
• /
• pp.285-294
• /
• 2000

80 persons who don't have past history of cardiopulmonary and neuromuscular disease. The results were as follow; 1. PCI(Physiological Cost Index) value without loading to ankle were significantly increased compared to 1kg, and 2kg (p<0.01). 2. Female Subjects showed more increased PCI value in without loading and lkg, 2kg loading compared to male subjects (p<0.01). 3. In every PCI condition the difference among height groups was observed (p<0.01). 4. The difference among weight groups in each PCI condition was observed (p<0.01). These results showed that energy consumption was increased according to loading on the ankle during gait so weight of orthosis or prosthesis must be considered when choosing them and during gait training with these ones.

• 아태비즈니스연구
• /
• 제6권2호
• /
• pp.1-17
• /
• 2015

This study compares the most widely used parametric and non-parametric techniques to measure cost and profit efficiency of banks, namely the Stochastic Frontier Analysis (SFA) and Data Envelopment Analysis (DEA). We formulate the specification form of both stochastic cost and profit frontier models and constant return to scale Cost DEA and Profit DEA models and provide an empirical assessment of the cost and profit frontiers based on a panel dataset of National Commercial Banks (NCBs) and Private Banks (PBs) in Bangladesh over the 2001-2010 period. The cost inefficiency and profit efficiency are slightly higher for PBs than NCBs in case of both SFA and DEA. The coefficients of advance and off-balance sheet items are significant that positively influence the banks in stochastic cost frontier model while the advance, other earning assets, price of borrowed fund are significant and negative effects on the banks in stochastic profit frontier model. The average cost inefficiency and average profit efficiency are recorded with 16.3% and 91% respectively. The highest and lowest cost inefficiency are observed for Janata Bank and United Commercial Bank Limited whilst the highest and lowest profit efficiency are recorded for Eastern Bank Limited and Janata Bank respectively. The average technical and allocative efficiency are 68.8% and 35.9%, respectively in case of CRS cost-DEA model whereas they are 70.3% and 31.8% in case of CRS profit-DEA model. The average cost inefficiency is recorded 6.3% by SFA whereas it is 24.5% by DEA. The average profit efficiency is found 91% by SFA while it is 22.1% by DEA, and SFA method shows better bank efficiency than DEA.

• 산업경영시스템학회지
• /
• 제19권37호
• /
• pp.263-269
• /
• 1996

The cost and customer service level of a logistics system depend primarily on the system design of the physical supply system and physical distribution system. The study presents the mathematical model and a huristic solution method of a combined location - vehicle routing problem(LVRP). In LVRP the objective is to determine the number and location of the distribution centers, the allocation of customers to distribution centers, and the vehicle delivery routes, so as to minimize the logistics total cost and satisfy the customer.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.879-886
• /
• 2012

The ultrasonic horn used for bonding of flip chip has been designed to vibrate at a natural frequency. The ultrasonic horn must be manufactured accurately in physical terms, because the small change of mechanical properties may result in the significant change of natural frequency. Therefore, tight tolerance is inevitable to keep the natural frequency in acceptable range. However, since tightening of the tolerance increases the manufacturing cost significantly, trade-off between the cost and accuracy is necessary. In this research, an attempt was made to design the ultra sonic horn within acceptable natural frequency while the manufacturing cost was kept as low as possible. For this purpose, among the 18 tolerances of physical terms of the ultrasonic horn, the most important 4 factors were selected using Taguchi method. The equation to relate those main factors and the natural frequency was made using response surface method. Finally, optimal design scheme for minimum manufacturing cost without a loss of performance was determined using SQP method.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.625-635
• /
• 2008

The purpose of this study was to investigate the mediating roles of the relationship quality and the switching cost during the processing of effects of service quality on the service loyalty in the beauty industry. Service quality factors were defined as the interaction quality, the outcome quality and the physical environment quality. The relationship quality were defined as the satisfaction and the trust of customer. Amos was used to analyze the research hypotheses and the proposed model. All research hypotheses were adopted. The empirical results were as follows; Service quality influenced positively on the relationship quality, and then the relationship quality yielded the service loyalty. Also the relationship quality influenced positively on the switching cost and then the switching cost influenced positively on the service loyalty. Each service quality dimension had a significant effect on the satisfaction, the trust and the relative importance of service quality dimensions on the satisfaction, the trust followed the order of the interaction quality, the outcome quality and the physical environment quality.

• Physical Therapy Rehabilitation Science
• /
• 제2권1호
• /
• pp.12-20
• /
• 2013

Objective: To determine the energy consumed and muscle use during dance compared to different standard exercise devices. Design: Longitudinal study. Methods: Fifteen female subjects were evaluated to assess the energy cost and muscle activity during a 20 minute dance video compared to treadmill, elliptical track and bicycle ergometry. The later 3 forms of exercise were accomplished in four, 5 minute bouts at different intensities of exercise. Subjects were in the age range of 22-24 years old, were free of cardiovascular disease and did not have any neurological injuries. They were not sedentary and exercised at least twice a week. During the exercise, muscle activity was measured by the electromyogram recorded by surface electrodes on 6 muscle groups. A Cosmed metabolic cart was used to measure oxygen consumption during the exercise. Results: The aerobic dance video that was tested here was equivalent to a hard workout on any of the 3 exercise modalities. The dance routine was equivalent in terms of energy consumed to running at 225 watts of work or running for 20 minutes at a speed of 2 meters per second (4.47 miles per hour). Compared to the bicycle, it was equivalent to cycling at 112 watts for 20 minutes (2.25 kpm), and for the elliptical trainer, dance was equivalent to 435 watts. Concerning muscle use, the dance routine was the most balanced for upper, core and lower body muscles. Although the elliptical trainer was close, it required muscle less muscle use. Conclusion: A good dance video can be more effective than standard exercise equipment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2169-2170
• /
• 2011

This paper presents about the analysis on cost factor reduction using the life cycle cost model for motor block in the KTX-1. Until now, most life cycle cost of the system as a whole that has been studied. but in case of railway industry part, LCC studies are needed on the subsystem like a propulsion control system because subsystems are developed continuously localization. Therefore, In this paper presents cost breakdown structure for life cycle cost (LCC) estimation for localization development of propulsion control system (Motor Block) in high speed railway vehicle (KTX-1). Also to analysis LCC on motor block, it was analyzed physical breakdown structure (PBS) and preventive cost on propulsion control system in view of maintenance cost. Based on this, we describe life cycle cost on motor block of KTX-1.