• 한국의류학회지
• /
• 제21권8호
• /
• pp.1315-1322
• /
• 1997

Ramie is one of the traditional fabrics in Korea, and very comfortable fabric for summer clothes because it has a high moisture-absorbing and transporting property. Futhermore ramie is very popular and Koreans prefer its handle for summer clothes. The kansan ramie has better quality as fibers and can be weaved as fine fabrics which are famous as kansan Fine ramie. Even though the good quality of kansan ramie has known widely, very few research work have been carried out on kansan ramie in the field of textile science. In this study, the analysis of the physical and chemical characteristics of Hansan ramie was conducted by using two different kinds of Hansan ramie: Hansan Fine ramie and kansan Coarse ramie. In addition, the same experiment was held on the one kind of chinese ramie to be compared with those of Hansan ramie. The following results were obtained from this experimental study. By the analysis of chemical composition of ramie, the similar chemical composition (a -cellulose: 83∼85%, pectin substances: 2.81∼ 3.01%) were found from all of the ramie fabrics used in this study. It has shown that Hansan coarse ramie has the highest toughness value and wrinkle recovery angle among the samples used in this study. From the result of KES-F system, it was found that Hansan Coarse ramie which is composed with the thicker yarns has the highest value on the bending properties, 2HG and surface properties. The primary hand value was also calculated by KN-203 LDY and value of Koshi was shown as the order of kansan coarse ramie> Chinese ramie> kansan fine ramie, and Hansan fine ramie had shown the highest Numeri and Fukurami value among the 3 samples used in this study.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.51-57
• /
• 2010

Cycling that transform human energy into mechanical energy is one of the man-machine systems out of sports fields. Benchmarking means "improving ourselves by learning from others', therefore benchmarking toward dominant cyclist is necessary on field. The goals of this study were to provide important factors on multi-disciplines (kinematics, physiology, power, psychology) for a tailored-training program that is suitable to individual characteristics. Two cyclists participated in this study and gave consent to the experimental procedure. One was dominant cyclist (years: 21 yrs, height: 177 cm, mass: 70 kg), and the other was non-dominant cyclist (years: 21, height: 176, mass: 70). Kinematic data were recorded using six infrared cameras (240Hz) and QTM (software). Physiological data (VO2max, AT) were acquired according to graded exercising test with cycle ergometer and power with Wingate test used by Bar-Or et. al (1977) and to evaluate muscle function with Cybex. Psychological data were collected with competitive state anxiety inventory (CSAI-2) that was devised by Martens et. al (1990) and athletes' self-management questionnaire (ASMQ) of Huh (2003). It appears that the dominant's CV of ankle joint angle was higher than non-dominant's CV and dominant's pedaling pattern was consistent in biomechanics domain, which the dominant's values for all factors ware higher than non-dominant's values in physical, and physiological domain, and their values between cognitive anxiety and somatic anxiety were contrary to each other in psychology. Further research on multi-disciplines may lead to the development of tailored-optimal training programs applicable with key factors to enhance athletic performance by means of research including athlete, coach and parents.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.117-126
• /
• 1997

In fast grown softwood, there are very large changes in material properties going outward from the pith to bark such as anatomical, physical and mechanical characteristics. Some of variations in anatomical properties with annual ring were then examined from Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa, which are major softwoods of plantation in Korea. The large variations of annual ring width during young age of tree tended to stabilize after 25year through the transitional period in 17~23year. The ring density was 1.5~2.4 in 1~10year period, and 3.5~6.3 in 30~35year period, in which juvenile and mature wood were certainly assumed to be formed, respectively. Variations of tracheid length showed functional relationships with annual rings as logarithm. Demarcation between juvenile wood and mature wood could be 16~19year, which was determined from increase rate of tracheid length of 0.2%. Cell wall thickness increased with increase of annual ring even though large variations were observed as well. Variations of cell wall thickness within species were pronounced in latewood than earlywood. The increase of cell wall thickness from juvenile wood to mature wood was predominant in Larix leptolepis as 2.0times, and least in Chamaecyparis obtusa as 1.1 times. Cell diameters showed trends of increase during young age of 1~15year, and consistent afterward. The variations of cell diameter between radial and tangential direction were greater in latewood, and most pronounced in Chamaecyparis obtusa.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.28-43
• /
• 2013

Recent trends toward the collaborations among various sectors of academia and research areas have brought interests and significances in new activities especially in the fashion and textile areas. One of the collaboration examples is the recent research projects on 3D virtual clothing systems based on the 3D CAD software. The 3D virtual clothing systems provide simulated apparels with high degrees of fidelity in terms of color, texture, and structural details. However, since real fabrics exhibit strong nonlinearity, anisotropy, viscoelasticity, and hysteresis, the 3D virtual clothing systems need fine tuning parameters for the simulation process. In this study, characteristics of silk fabrics, which are woven by using degummed silk and raw silk yarns, are being analyzed and compared. Anisotropic properties may be measured as warp and filling direction properties separately in woven fabrics, such as warp tensile stress or filling bending rigidity. Hysteretic properties may be measured as bending hysteresis or shear hysteresis by using KES measurements. These data provide deformation-force relationships of the fabric specimen. Three-dimensional effects obtained when using these characteristic fabrics are also analyzed. The methods to control the three-dimensional appearance of the sewn fabric specimens when utilizing a programmable microprocessor-based motor device, as prepared in this study, are presented. Based on the physical and mechanical properties measured when using the KES equipment, the property parameters are being into a 3-dimensional virtual digital clothing system, in order to generate a virtual clothing product based on the measured silk fabric properties.

• 한국표면공학회지
• /
• 제42권3호
• /
• pp.109-115
• /
• 2009

Magnesium is one of the lightest metals, and magnesium alloys have excellent physical and mechanical properties such as high stiffness/weight ratios, good castability, good vibration and shock absorption. However their poor corrosion resistance, wear resistance, hardness and so on, have limited their application. To improve these defects, many techniques are developed. Micro arc oxidation(MAO) is a one of the surface treatments under anodic oxidation in which ceramic coating is directly formed on the surface of magnesium alloy. In this study, the characteristics of anodic film were examined after coating the AZ31B magnesium alloy through the MAO process. MAO was carried out in potassium hydroxide, potassium fluoride, and various concentration of sodium silicate in electrolyte. The morphology and chemical composition of the coating layer were characterized by SEM, XRD, EPMA and EDS. The hardness of anodic films was measured by micro-vickers hardness tester. As a result, the morphology and composition of anodic film were changed by concentration of sodium silicate. Thickness and Si composition of anodic film was increased with increasing concentration of sodium silicate in electrolyte. The hardness of anodic film was highly increased when the concentration of sodium silicate was above 40 g/l in electrolyte.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.389-396
• /
• 2002

In XXI century it is necessary to expect the recommencement and development of activities on mastering the Moon. In the long term it is construction of manned lunar bases with industrial, astrophysical, procuring, repair equipment and services. Interplanetary flights from the Moon demand smaller power expenditures, than from the Earth, therefore it is favourable to use its surface for the construction of space-vehicle launching sites. Flights of devices in libration points in the system 'Earth - Moon' are considered. Experience of engineering system creation for the Moon displays the great complexity in provision of serviceability and reliability of friction units. Open friction units should operate under following conditions on the Moon: pressure of environment (vacuum) $p\;>10\;^{-10}$ Pa; wide range of temperature change $+150^{\circ}C\;...170^{\circ}C$; high evaporability of lubricants; influence of temperature gradients and warping of constructions; sublimation of elements of constructional materials; irradiation of different physical nature; effect of micrometeorites; reduced gravitation; influence of abrasive particles of lunar ground; requirements on minimization of size and weight characteristics of a construction (high tension); undesirability (impossibility) of application of liquid and plastic lubricants; vibration, shock, acoustic loadings during start and landings to the Earth; difficulties in repair-regenerative operations in conditions of the Moon etc. Adhesive interaction of conjugated surfaces is the principal reason of possible failures of rubbed units on the Moon. In the research of the Moon automatic interplanetary stations of 'Luna' (USSR), 'Surveyer', 'Apollo' (USA) series were used. Stations executed functions of flying, landing, artificial satellites of the Moon, moon-rovers and manned spacecrafts such as 'Apollo'. The experimental- theoretical researches carried out in the sixtieth years on tribology for conditions of the Moon appeared to be rather useful to engineering of an outer space exploration and the decision of complex problems for the friction units operating in extreme conditions on the Earth. For the creation of highly loaded friction units for the long service life on the Moon it is required not only to use accumulated experience and designed technologies, but also to carry out wide scientific research.

• 폴리머
• /
• 제34권2호
• /
• pp.108-115
• /
• 2010

본 연구는 MWCNT로 보강된 SBR 나노복합재료를 컴파운딩법(compounding)으로 제조하여 산 처리된 MWCNT와 커플링제 상호간의 물리적 화학적 특성을 조사하였다. 황산과 질산으로 산화된 MWCNT는 FT-IR 분석 결과 -COOH로 기능화됨을 확인하였고, Raman 분석 결과 표면의 defect 존재와 disorder됨을 확인하였다. 또한, 제조된 SBR 복합재료의 가황 특성, 전기적 열적 특성 및 기계적 특성을 비교 평가하였다. 그 결과 산 처리된 MWCNT와 커플링제와의 상호 결합력으로 인해 기계적 물성은 상대적으로 증가하였으나, 전기적 열적 특성은 MWCNT의 defects나 disorder의 형성과 chopping으로 인해 감소됨을 확인할 수 있었다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.15-24
• /
• 2009

Cycling that transform human energy into mechanical energy is one of the man-machine systems out of sports fields. Benchmarking means " improving ourselves by learning from others ", therefore benchmarking toward dominant cyclist is necessary on field. the goals of this study were to provide important factors on multi-disciplines (kinematics, physiology, power, psychology) for a tailored-training program that is suitable to individual characteristics. Two cyclist participated in this study and gave consent to the experimental procedure. one was dominant cyclist (years:21 yrs, height:177 cm, mass:70 kg), and the other was non-dominant cyclist(years:21, height:176, mass:70). Kinematic data were recorded using six infrared cameras (240Hz) and QTM (software). Physiological data (VO2max, AT) were acquired according to graded exercising test with cycle ergometer and power with Wingate test used by Bar-Or et. al ( 1977) and to evaluate muscle function with Cybex. Psychological data were collected with competitive state anxiety inventory (CSAI-2) that were devised by Martens et. al (1990) and with athletes' self-management questionnaire (ASMQ) of Huh (2003). It appears that the dominant's CV(coefficient of variability) was higher than non-dominant's CV in Sports Biomechanics domain, that the dominant's values for all factors ware higher than non-dominant's values in physical, and physiological domain, and their values between cognitive anxiety and somatic anxiety were contrary to each other in psychology. Further research on multi-disciplines may lead to the development of tailored-optimal training programs applicable with key factors to enhance athletic performance by means of research including athlete, coach and parents.

• 감성과학
• /
• 제7권2호
• /
• pp.179-186
• /
• 2004

중추신경계는 일단 손상이 되면 손상된 세포의 재생, 손상된 수초의 회복, 신경계의 정상적인 연결 등의 제한성 때문에 그 회복이 매우 힘들다. 이러한 중추신경계의 중요한 손상으로는 다발성 경화증, 뇌졸중, 척수손상, 외상, 축삭의 탈수초화 등이 있다. 이전 연구들은 많은 발생빈도를 보이고 있는 척수손상에서 실질적인 척수의 기능적인 회복을 위해 손상된 척수신경의 재생과 축삭의 재수초화가 중요한 요인이라고 전하고 있다. 최근에는 이러한 척수손상에 대한 치료적 접근으로서 세포이식 기술이 하나의 해결책을 열어주고 있다. 따라서 본 논문에서는 척수손상의 특성을 살펴보고, 척수손상에 의한 기능장애에 대해 세포이식이 기능의 회복을 증진시킬 수 있다는 증거를 논의하고자 한다.

• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.63-70
• /
• 2024

Lithium-ion batteries (LIB) are widely used in various sectors, such as transportation (e.g., electric vehicles (EV)) and energy (e.g., energy storage facilities) due to their high energy density, broad operating temperature (-20 ℃ ~ 60 ℃), and high capacities. LIBs are powerful but fragile on external factors, including pressure, physical damage, overheating, and overcharging, that cause thermal runaway causing fires and explosions. During a LIB fire, a large amount of oxygen is generated from the decomposition of ionogenic materials. A water fire extinguisher that helps with cooling and suffocating must be essentially required at the same time. In fact, however, it is difficult to suppress LIB fires in the case of EVs because a LIB is installed with a battery pack housing that interrupts direct extinguishing by water. Thus, this study aims to investigate effective fire extinguishing measurements for LIB fires by using an EV. Relevant documents, including research articles and reports, were reviewed to identify effective ways of LIBs fire extinguishing. A real-scale fire experiment generating thermal runaway was carried out to figure out the combustion characteristics of EVs. This study revealed that the most effective fire extinguishing measurements for LIB fires are applying fire blankets and water tanks. However, there is still a lack of adequate regulation and guidelines for LIB fire extinguishment. Taking this into account, developing functional fire extinguishment measurements and available regulatory instruments is an urgent issue to secure the safety of firefighters and citizens.