• 한국지반공학회논문집
• /
• 제31권7호
• /
• pp.41-52
• /
• 2015

제주도 화산암은 여러 환경적인 요인으로 인하여 크기와 분포가 다양한 기공이 많은 다공성 구조를 보이고 있으며, 지질학적 그리고 역학적 특성 또한 지역마다 차이를 나타내고 있다. 뿐만 아니라, 제주도의 기반암은 여러 차례의 화산활동으로 인해 현무암층 사이에 연약층인 화산쇄설물 및 공동이 불규칙하게 발달된 층상구조로 이루어져 있다. 본 연구에서는 제주도 북서부 육 해상에서 채취한 현무암 암석에 대하여 다양한 물성 시험 및 일축압축강도 시험을 수행하고, 그 결과를 제주도 남동부 해상에서 채취한 현무암 암석의 물리적, 역학적 특성과 비교 분석하였다. 그 결과 제주도 북서부 육 해상에서 채취한 현무암 암석의 물리, 역학적 특성은 제주도 남동부 해상에서 채취한 현무암 암석과 유사한 관계에 있음을 확인할 수 있었으며, 물리적 특성과 역학적 특성의 상관관계로부터 대략적인 설계정수를 추정할 수 있었다.

• 한국치위생학회지
• /
• 제4권2호
• /
• pp.179-191
• /
• 2004

A series of experiments were conducted on dental denture base resins for their antibiosis. They were also compared in terms of physical and mechanical characteristics, which led to the following results: 1. As for bacterial deposition, the old products showed a wide range of distribution, while those products containing C. S. had restraints. 2. Among the products containing C. S., those ones of 7, 12 and 20% all had restraints of similar size to slop further bacterial growth. In the meanwhile, the old products had only small-size restraints for bacterial growth. 3. The following changes were observed in the aspect physical characteristics: There were no significance between the old products and the C. S. products. Thus, as for compressive force, the average${\pm}$standard deviation of the old products was $27.4083.{\pm}1.7397$, and those C. S. products of 20% showed the similar $27.5600{\pm}.1976$. In addition, there were no significance between the old products and those ones containing C. S. in terms of tensile force. The tensile force of the old products was $114.5600{\pm}.8916$ in average${\pm}$standard deviation, while there was no differences among the C. S. products of 7, 12, and 20% in that matter.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.853-863
• /
• 1999

the change of physical properties (thickness, weight, air permeability) and mechanical properties(abrasion resistance breaking load and displacement) of samples were determined after heat exposure by a RPP tester. The effect of exposure time and heat flux intensity on the changes and the relationship between physical properties and mechanical properties were investigated. FR treated cotton Kevlar/PBI and Nomex with different structureal characteristics were chosen for specimens. The changes of physical properties and mechanical properties were calculated based on their initial values before heat exposure. The longer exposure time and the high heat flux intensity the more changes of those properties. Heat flux intensity was more effective on the changes, The showed to be affected by an interplay of shrinkage and pyrolysis products loss. The changes of thickness and abrasion resistance showed to be higher for plain weave fabric and those of air permeabiliyt and breaking load and displacement for twill weave fabric. While FR treated cotton which have high RPP value experienced serious and detrimental changes after heat exposure Kevlar/PBI which has low RPP value showed no high changes. In conclusion it could be confirmed that when total performance of a protective clothing is estimated retention capability of physical and mechanical properties after heat exposure as well as RPP value must be considered.

• Geomechanics and Engineering
• /
• 제13권3호
• /
• pp.371-384
• /
• 2017

Physical and mechanical properties of rocks are of interest in many fields, including materials science, petrophysics, geophysics and geotechnical engineering. Uniaxial compressive strength UCS is one of the key mechanical properties, while density and porosity are important physical parameters for the characterization of rocks. The economic interest of carbonate rocks is very important in chemical or biological procedures and in the field of construction. Carbonate rocks exploitation depends on their quality and their physical, chemical and geotechnical characteristics. A fast, economic and reliable technique would be an evolutionary advance in the exploration of carbonate rocks. This paper discusses the ability of ultrasonic wave velocity to evaluate some mechanical and physical parameters within carbonate rocks (collected from different regions within Tunisia). The ultrasonic technique was used to establish empirical correlations allowing the estimation of UCS values, the density and the porosity of carbonate rocks. The results illustrated the behavior of ultrasonic pulse velocity as a function of the applied stress. The main output of the work is the confirmation that ultrasonic velocity can be effectively used as a simple and economical non-destructive method for a preliminary prediction of mechanical behavior and physical properties of rocks.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.19-28
• /
• 2006

This paper describes rapid prototyping (RP) and reverse engineering (RE) application for orthopedic surgery planning to improve the efficiency and accuracy of the orthopedic surgery. Using the symmetrical characteristics of the human body, CAD data of undamaged bone of the injured area are generated from a mirror transformation of undamaged bone data for the uninjured area. The physical model before the injury is manufactured from Poly jet RP process. The surgical plan, including the selection of the proper implant, pre-forming of the implant and decision of fixation positions, etc., is determined by a physical simulation using the physical model. In order to examine the applicability and efficiency of the surgical planning technology, two case studies, such as a distal tibia comminuted fracture and an iliac wing fracture of pelvis, are carried out. From the results of the examination, it has been shown that the RP and RE can be applied to orthopedic surgical planning and can be an efficient surgical tool.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.213-217
• /
• 2002

Power devices for high power drivers that need high switching speed (IGCT, HVIGBT) have been continuously developed. However, serial and parallel connections using several much cheaper, lower power capacity of devices than an expensive high power device are very useful methods in the aspect of cost down and high power application. Even the current and voltage unbalance problem is occurred at each devices. This unbalance characteristics are mainly caused by the differences of physical characteristics of each devices and the line inductance (stray inductance) of bus bars that consist of current path. This paper deals simulation analysis of serial connection of IGCTs and parallel connection of IGCTs using physical model of devices. And also, introduces the method to reduce the voltage and current unbalance problem.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.106-110
• /
• 2005

This research surveys the mechanical properties of worsted fabrics for garment according to the loom characteristics and fabric positions with relation to the warp and weft weaving tensions on the projectile and air-jet looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of projectile and air-jet looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorability and fabric hand.

• 한국농공학회지
• /
• 제45권1호
• /
• pp.74-82
• /
• 2003

In this paper, an experimental program was undertaken to test the analysis on Component and mechanical characteristics for crushed stone of excavated Rocks from Sandstone, Shale, Mudstone, for use as a new source of aggregate. Physical and mechanical properties, required for aggregate materials, of major constituents of rock wastes including Sandstone, Shale, Mudstone, Felsite, Basalt, Marl were measured in the laboratory Test results showed that the Shale, Felsite, Basalt tested in this study might possibly be used for construction aggregates. In case of Sandstone and Mudstone, some physical properties such as rock strength were generally adoptable but the aggregate characteristics were lower than required.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.772-777
• /
• 2004

This research surveys the mechanical properties of worsted for garment according to the loom characteristics and fabric positions with relation to the warp and weaving weft tensions on the 3 types of rapier looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of 3 types of rapier looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorability and fabric hand.

• 대한토목학회논문집
• /
• 제32권6C호
• /
• pp.275-284
• /
• 2012

남극대륙은 바람이 강하며 지구상에서 가장 기온이 낮고 건조한 극한환경 조건으로서 지표면의 암석은 동결-융해에 의해 암석의 역학적 특성이 변해왔다. 극지 암석의 지반공학적 특성을 이해하기 위하여 남극에서 직접 암석을 채취하여 암석의 물리적 역학적 특성을 분석하였다. 서남극 케이프 벅스 및 동남극 테라노바 만의 암석은 국내 편마암이 보이는 대표적인 물성 값의 범위내에 존재하고 있었으며, 케이프 벅스의 노출된 암석이 테라노바 만에 비하여 암반 강도가 큰 것으로 나타났다. 테라노바 만의 지표에 노출된 암석의 평균 흡수율은 0.56%, 평균 P파 속도는 3,717m/s, 일축압축 강도는 109MPa로 측정되었으며, 시추조사로부터 채취한 심도 2.9m 이상의 암석 평균 흡수율은 0.24%, 평균 P파 속도는 4,670m/s, 일축압축 강도는 88MPa로 측정되었다. 테라노바 만의 지표면에 노출된 암석과 심부에서 채취한 암석을 비교한 결과, 노출된 암석은 동결-융해의 영향으로 판단되는 역학적 특성 변화는 나타나지 않았으나 흡수율-P파 속도 변화의 물리적 특성 변화는 잘 나타났다.