• 한국식품과학회지
• /
• 제26권4호
• /
• pp.428-435
• /
• 1994

쌀전분의 다각적 이용을 위하여 고순도의 멥쌀전분과 찹쌀전분을 Alkali 침지법에 의해 제조하여 각각 드럼 건조기와 압출성형기로 변성전분을 제조한 후 특성을 검토하였다. 청값은 찹쌀전분이 가장 낮았으며 변성 후 L값이 감소하였다. 수분용해지수는 압출성형기로 제조한 변성전분들이 높은 값을 나타내었으며 수분흡수지수는 드럼건조기로 제조한 변성전분들이 높았다. Cold-Water-Solubility는 측정에서는 드럼건조기를 이용한 멥쌀변성전분이 가장 높았다. 각 시료들의 광투과도는 온도 증가에 따라 일정한 양상을 보이지 않았다. 드럼건조기로 제조한 멥쌀변성전분은 전단속도의 증가에 따라 점조성지수가 급격히 증가하였으며 항복응력도 가장 높은 값을 나타내었다. Gel Permeation Chromatography에 의하면 전분을 변성시킴에 따라 분자길이의 절단과 아밀로오스 분해가 일어남을 알 수 있었으며 X-선 간섭도형측정(XRI)에 의한 간섭도형은 피크를 상실한 V도형의 X-선 회절양상을 보임으로서 결정구조가 무정형으로 변화 된 것을 알 수 있었다.

• 한국식품저장유통학회지
• /
• 제5권4호
• /
• pp.346-349
• /
• 1998

개체당 중량과 과육부의 중량은 천일건조한 것이 2.8$\pm$0.03g/ea로 다른 건조방법에 비해 낮았다. 수분함량도 역시 천일건조한 것이 열풍건조를 비롯한 다른 방법에 비해 낮았다. 수분재흡수율은 열풍건조한 것이 다른 건조방법에 비해 높았으며 천일건조한 것이 가장 낮았다. 건조대추의 경도는 천일건조한 것이 8.6$\times$106dyne/$\textrm{cm}^2$으로 다른 건조방법에 비해 월등히 높았다. 부패율은 천일건조대추는 15.3%로 다른 건조방법에 비해 매우 높았고, 갈변도는 천일건조와 천일ㆍ열풍건조를 병행하여 건조한 대추에서 각각 286.5와 196.4%로 다른 건조방법에 비해 월등히 높았다. 탄수화물, 단백질, 지질의 함량은 모든 구에서 유사한 경향을 보였고, 회분의 함량은 천일건조 대추가 다른 건조방법에 비해 높았다. Vitamin C의 함량은 천일건조한 대추가 다른 건조방법에 의해 건조된 대추에 비해 낮았다.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.109-116
• /
• 2022

Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.

• 폴리머
• /
• 제30권2호
• /
• pp.152-157
• /
• 2006

수산기말단 폴리부타디엔(hydroxy-terminated polybutadiene: HTPB) 폴리올을 이용한 수분산 폴리우레탄(water-home polyurethane: WPU)의 제조에서 HTPB와 poly(propylene glycol)(PPG)을 혼합 사용한 음이온계 WPU와 쯔비터이온계 WPU를 제조하고 이들의 특성을 조사하였다. WPU 제조 시 HTPB 함량이 증가하면 입자 크기는 커지는 경향을 보이고, 폴리우레탄의 연질부와 경질부의 상분리는 증가하였다. 음이온계 WPU에 비하여 쯔비터이온계 WPU는 건조 필름의 분자간 수소 결합이 강해지는 경향을 나타내었다. 음이온계 및 쯔비터이온계 WPU는 공통적으로 건조 필름이 HTPB 함량이 폴리올 중 25 wt%일때 실험 범위에서는 신율과 인장 강도가 최대값을 보였으며, 이러한 특성은 폴리우레탄의 연질부와 경질부 사이의 미세 상분리를 반영한 것으로 판단되었다.

• 한국식품영양과학회지
• /
• 제33권7호
• /
• pp.1230-1236
• /
• 2004

능이버섯의 건조과정에 따른 물성 변화를 조사하기 위하여 수분함량 86.68%인 능이버섯을 5$0^{\circ}C$, 1.5 m/s, 상대습도 15%의 조건에서 건조하면서 Rheometer로 물성을 측정하였다. 능이버섯은 건조가 진행됨에 따라 압축거리는 약 60%가 감소하였다. 능이버섯을 파괴시키는데 필요한 힘은 감소하였으며, 부드러운 정도를 나타내는 수치 또한 감소하였으나 경도는 증가하였다. 이는 건조가 진행되면서 조직이 단단해지고 수축되면서 나타나는 현상이라고 사료된다. 능이버섯의 색도는 건조과정 중L값, a값, b값이 감소하여 대체로 검게 변하였으며, 구조는 두께의 수축율이 72.8%인데 반해 면의 수축율은 38.05%로 두께의 수축이 면의 수축보다 2배정도 큰 것을 보였다. 즉, 건조 중 능이버섯은 갓의 크기가 작아지면서 두께가 상당히 얇아지는 것으로 나타났다 능이버섯을 건조한 후 재수화시 재수화율은 약 30%정도로 나타났고, 응력이 최고로 도달하는데 걸리는 시간 또한 6.41초로 44.2%정도 회복되었다.

• 원예과학기술지
• /
• 제19권2호
• /
• pp.179-185
• /
• 2001

원예용 배지의 물리화학적 특성을 파악하기 위해 전세계적으로 다양한 분석 방법이 사용되고 있다. 유럽은 배지 분석방법의 표준화 연구를 지속적으로 수행해왔다. 유럽표준화 위원회에서는 유럽표준방법으로 CEN methods를 최종안까지 제출하였으며 사실상 유럽표준 배지분석방법의 제정을 확립하는 단계에 있다. 물리적 특성 중 건물함량과 수분함량은 건조 후 분석하였고, 실험 가밀도는 일정한 부피에 채워진 시료의 무게로 측정하였다. 가밀도, 진밀도, 공극률, 액상, 기상, 부피 감소율은 double ring과 sand suction table이라는 장치를 사용하여 배지를 포화, 배수시킨 후 건조시켜 분석하였다. 화학적 특성 중 pH와 EC는 부피 기준 1:5로 침출하여 분석하였다. 유기물과 회분함량은 건조와 연소 과정을 통해 분석하였다. CEN methods는 유럽표준방법으로 확립을 앞두고 있으나 더 지속적인 연구가 필요할 것이다.

• Journal of Biosystems Engineering
• /
• 제9권2호
• /
• pp.89-96
• /
• 1984

This study was intended to search the thermal properties of rice which are necessary in preventing qualitative and quantitative losses in the drying and milling processes. First, the coefficient of cubical thermal expansion of brown rice was measured, which is required for analyzing the internal stress of rice, and then theoretical thermal and moisture stresses were calculated. The results are summarized as follows: 1. The coefficient of cubical thermal expansion of brown rice was about $2.81{\times}10^{-4}/^{\circ}C$ in the temperature range of $10^{\circ}C-60^{\circ}C$. 2. When the shape of brown rice was assumed to be a sphere or a cylinder, maximum thermal stress due to temperature change of $20^{\circ}C-60^{\circ}C$ was in the range of $25-100kg/cm^2$. And maximum moisture stress was in the range of $450-650kg/cm^2$ when the drying temperature was $35^{\circ}C$, initial and final moisture contents of brown rice were 20% and 14% (w.b.), and the moisture diffusion coefficient was assumed to be $6.79{\times}10^{-4}cm^2/hr$. 3. Consequently, it was concluded that crack formation in a rice kernel is mainly caused by moisture stress.

• Journal of Biosystems Engineering
• /
• 제28권5호
• /
• pp.411-420
• /
• 2003

Physical and cultural properties were investigated on the rice-seed pellets made by the pelleting machine(Yu, 2003) as the changes with mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : I, and rotating speeds of forming rolls of 7, 10, and 13 rpm. Average weight, average diameter, and average sphericity of the pellets were 1.70 g, 12.0 ㎜, and 99.1 ％, respectively. Average number of seeds per pellet was more than 3, and almost all pellets had more than 3 seeds in the cases of mixing ratios of 6 : 1, and 7 : 1 at the forming rolls' speed of 7 rpm. Gradual drying was needed because rapid drying caused cracks on surface of the pellets. Compression strength of the pellets dried in shady room was in the range of 132 ∼ 152 N, which was enough for handling. Comparing with the previous pellets(Park, 2002), average number of seeds per pellet, ratio of pellets including more than 3 seeds, and compression strength increased due to the effects of pressure feed of pellet materials, and improvements of the forming rolls. Emergence ratio of the pellets made at the mixing ratio of 6 : 1 and the forming rolls' speed of 7 rpm, was 100 % on dry paddy and was 97 % on flooded paddy surface. Good growth characteristics, and yield except number of seedling stand and ratio of missing plant were shown in planting of the pellets made at the mixing ratio of 7 : 1 and the forming rolls' speed of 7 rpm on flooded paddy surface field. Considering the cultural results, the mixing ratio of 6 : 1, and the forming rolls' speed of 7 rpm seems to be optimum operating condition for the improved pelleting machine.

• Archives of Pharmacal Research
• /
• 제28권4호
• /
• pp.493-501
• /
• 2005

Effect of solvents on physical characteristics and release characteristics of monolithic acetaminophen (APAP) hydroxypropylmethylcellulose (HPMC) matrix granules and tablets were examined. Various types and amounts of solvents were employed for granulation and coating. APAP and other excipients were mixed and were then wet-granulated in a high-speed mixer. The dried granules were then directly compressed and film-coated with low viscosity grade HPMC. As the amount of water increased, the size of granules also increased, showing more spherical and regular shape. However, manufacturing problems such as capping and lamination in tableting occurred when water was used alone as a granulating solvent. The physical properties of HPMC matrix granules were not affected by the batch size. The initial release rate as well as the amount of APAP dissolved had a tendency to decrease as the water level increased. Addition of nonaqueous solvent like ethanol to water resulted in good physical properties of granules. When compared to water/ethanol as a coating solvent, the release rate of film-coated HPMC matrix tablets was more sensitive to the conditions of coating and drying in methylene chloride/ethanol. Most of all, monolithic HPMC matrix tablet when granulated in ethanol/water showed dual release with about $50\%$ drug release immediately within few minutes followed by extended release. It was evident that the type and amount of solvents (mainly water and ethanol) were very important for wet granulation and film-coating of monolithic HPMC matrix tablet, because the plastic deforming and fragmenting properties of material were changed by the different strengths of the different solvents.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.