• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.19-27
• /
• 1995

The 2-packaged polyurethane coatings were synthesized, blending pheylmodified polyesters(of which synthetic methods were reported in the previous paper), Desmodur L-75(polyisocyanate wide1y used for coatings), wetting-dispersing agent, white pigment. etc. A variety of coating properties were tested for the coating treatment polyurethane coationgs. Compared with conventional 2-packaged polyure-thane coating, abrasion resistance and lightness index difference of the ones synthesized in the present work were somewhat decreased, but the coating properties such as hardness, gloss specular, cross hatch adhesion. etc. were improved. Especially, resistance against chemical reagents and salt were strikingly improved. In addition. the coationgs had short drying time and long pot-life. This shows that the coationgs are appropriate for rapid drying coatings.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.143-148
• /
• 2018

Sodium silicate based silica aerogels are lower in cost than silica alkoxide based silica aerogels, but the demand is decreasing as their physical properties are lowered. In this research, acetonitrile as a drying control chemical additive (DCCA) is added in the sol state to improve the pore-structural properties of sodium silicate based silica aerogel by preventing the agglomeration of particles and cross-linked bond. The sodium silicate based silica aerogel by ambient pressure drying were prepared by sol-gel process. Acetonitrile/$Na_2SiO_3$ molar ratio of 0, 0.05, 0.1, 0.15, and 0.2 was added to the sol state. The physical properties of the final product were analyzed using Fourier transform infrared, contact angle measurement, Brunauer-Emmett-Teller and Barrett-Joyner-Halenda measurements and field emission scanning electron microscopy. It was confirmed that the sample with adding 0.15 molar ratio of acetonitrile and sodium silicate showed a high specific surface area ($577m^2/g$), a high pore volume (3.29 cc/g), and a high porosity (93%) comparable to the pore-structural properties of silica alkoxide based silica aerogels.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.25-34
• /
• 2018

The physical properties and unsaturated characteristics of acid sulfate soils were investigated and analyzed. As the results of measuring physical properties of the acid sulfate soils obtained around the Ilkwang mine area, the dry unit weight is $1.246t/m^3$ and this soil is classified into the silty sand (SM) by USCS. Soil Water Characteristics Curves (SWCC) of the drying and wetting paths were measured by the automated SWCC apparatus. Also, Hydraulic Conductivity Functions (HCF) of the drying and wetting paths were estimated by the van Geunchten (1980) model which is the most well-known parameter estimation method. The hydraulic conductivity of acid sulfate soils in the dry path was continuously decreased with increasing the matric suction. However, the hydraulic conductivity in the wetting path was decreased relatively small with increasing matric suction and decreased suddenly just before water entry value of matric suction. Meanwhile, the hysteresis phenomenon was occurred in SWCCs and HCFs during the drying and wetting paths.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.5-9
• /
• 1999

In recent years, the line of increase in policy on tobacco production triggered a rise in the loading volume per bulk curing barn, and manufacturers boosted the output of their blowers in order to prevent dirty leaves in the process of curing. for this reason, we studied the effect of the reducing air flow in bulk curing chamber from the color fixing stage to the stem drying stage of flue curing process on physical properties of cured leaves. The control of air flow was composed of the reducing air velocity of blower by means of a voltage regulator (slidac), and condition before color fixing stage was all the same with the conventional curing method. As a result, an effectiveness of improvement in the physical properties of cured leaves were observed. The leaves cured by this method were somewhat orange in color of upper stalk position, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of reducing air flow during the curing process, increase of price per kg reached to about 5 % compared with those of conventional curing method.

• Journal of the Korean Geographical Society
• /
• v.38 no.6
• /
• pp.935-948
• /
• 2003

The State Soil Geographic (STATSGO) database is a valuable source for assessment of soil properties at a state level. Using GIS techniques, eight physical soil properties were extracted from the database, including available water capacity, clay content, soil depth, slope, depth to water table, drainage, texture, and permeability. The influences of these soil properties on drought severity, which was estimated by NDVI departures from normal, were determined over western-central Kansas. Study results showed that seven soil properties had significant relationships with drought severity with correlation coefficients, ranging from -0.89 to 0.85. Thermal emission signals from the Moderate Resolution Imaging Spectroradiometer (MODIS) had a significant relationship with drought severity expressed by NDVI departure from normal and represented spatial progression of drought over time well. High thermal signals, indicating high soil moisture deficit, emerged in the western region and their spatial distribution changed over time. Different sets of soil factors influenced drought severity among early-drying and late-drying areas.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.295-304
• /
• 2015

This paper investigated wear comfort property of heat storage knitted fabrics for high emotional garment. For this purpose, ZrC imbedded PET knitted fabric was prepared and various physical properties such as thermal, wicking and drying characteristics were measured. In addition, far-infrared emission characteristics of ZrC imbedded PET was analysed and tactile hand property and dye affinity of ZrC imbedded knitted fabric were also studied in comparison with regular and other commercial heat storage PET knitted fabrics. It was observed that Zr imbedded amount in the yarn was 19.29% by ingredient analysis and far-infrared emission energy was $3.65{\times}10^2W/m^2$, emissivity was 0.906 at the range of wavelength $6{\sim}20{\mu}m$. It was found that maximum heat flow (Qmax) of ZrC imbedded PET knitted fabric was lower than that of regular PET one and warmth keepability rate was higher than that of regular PET one, which means ZrC imbedded PET have heat storage property. Drying property of ZrC imbedded knitted fabric was better than that of regular PET one due to heat by far-infrared emitted from ZrC in the core of filament. It revealed that wicking property of the ZrC imbedded fabric was not influenced by far-infrared emission, but affected by fibre physical properties. Tactile hand property of ZrC imbedded knitted fabric was not influenced by imbedding ZrC in the filament but affected preferably by structure of knitted fabric. Dye affinity of ZrC imbedded PET knitted fabric was less influenced by dyeing temperature and time than regular PET knitted one.

• Journal of Pharmaceutical Investigation
• /
• v.6 no.1
• /
• pp.26-32
• /
• 1976

Dicalcium phosphate dihydrate (DCPD) is the most widely-used dentifrice abrasive in non-therapeutic tooth-paste requiring, low abrasive level, high stability and excellent compatibility with other formulation ingredients. One of the difficulties encountered in the use of this material in tooth-paste is that unless storage of the product is maintained at a relative low temperature there is a distinct tendency to lose water of crystallization. Another difficulty which has been encountered is that there is a tendency for the product to become lumpy. Various means have been proposed for increasing the stability and overcoming the lumping tendency, most of which means comprise the addition of stabilizing agent. But there is not any report about the relationships between the mechanism of dehydration, physical properties, structure and manufacturing condition. In this experiment, DCPD were manufactured by methods of Moss' patent, its two varied and J.P.VIII, these were studied by means of stability test, IR spectra, and DTA. According to the manufacturing conditions, DCPD has different physical properties and structures, i. e., monoclinic system of low drying temperature, triclinic system of high drying temperature. Dehydration of DCPD may be supposed one step debydration at about $100^{\circ}$ and it finaly converts to ${\gamma}-pyrophosphate$ at about $465^{\circ}$ and if the drying temperature is high it becomes DCP anhydrous. DCPD made by Moss' patent is thought of the best polishing agent of tooth-paste.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.2
• /
• pp.228-233
• /
• 1997

The effects of spray drying and extrusion drying on functional properties of agar were investigated to increase the availability of agar in food industry. In case of unmodified and spray-dried agar, gel strength and viscosity were 1,070g/$ extrm{cm}^2$ and 170.50pcs, 820g/$\textrm{cm}^2$ and 17.07cps, respectively, while 523.28g/$\textrm{cm}^2$ and 12.81 in extrusion-dried product. The lowest dissolving onset and conclusion temperature were revealed in extrusion sample, where it was attained in 80 and 11$0^{\circ}C$ of unmodified, 60 and 9$0^{\circ}C$ of spray-dried, and 35 and 8$0^{\circ}C$ of extrusion-dried agar, respectively. Melting and setting in unmodified sample were showed to 110.17 and 40.52, 90.05 and 39.54$^{\circ}C$ in spray dried, and 80.01 and 36.05$^{\circ}C$ in extrusion-dried agar, respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.4
• /
• pp.117-124
• /
• 2007

Focused on the material-related aspect for enhancing the durability of concrete, the present study analyzed the effect of glycol ether admixture, which is a chemical admixture that can compact the structure of concrete by entraining air inside the concrete, on the basic physical properties and durability characteristic of the concrete. In analyzing the results of experiment, we examined the basic physical properties and durability characteristic of concrete according to addition rate based on OPC and selected the optimal addition rate. In addition, with the optimal addition rate, we added glycol ether admixture to concrete, which contained fly ash used as binder and high-performance water reducing agent for reducing the unit quantity, and examined changes in the characteristics of the concrete. According to the result, the optimal addition rate of glycol ether admixture was 3% of the unit quantity of cement, and the addition of binder and chemical admixture did not have a significant effect on unhardened concrete but reduced the air content. In addition, concrete showed resistance performance of around 30% to carbonation and around 40% to drying shrinkage. In addition, as for resistance to freezing and thawing, the relative dynamic modulus of elasticity was over around 85% through atmospheric curing. These performances prove the effect.