• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.689-695
• /
• 2016

In this study, the drying characteristics of medicinal (Ganoderma lucidum, Phellinus linteus) and edible (Pleurotus eryngii, Lentinus edodes) mushrooms were investigated. Their shrinkage ratios, Hunter's color values, and rehydration ratios were evaluated. Mushrooms were cut with rectangular (1 cm) and square ($1{\times}1cm$) shapes, and dried in the room temperature and at $50^{\circ}C$ and $70^{\circ}C$ using hot-air dryer. Initial moisture contents of edible mushrooms were higher than those of medicinal mushrooms, whereas final moisture contents were vice versa. Drying rate was the highest when drying at $70^{\circ}C$ (p<0.05). Moreover the drying rate of square slices was higher than that of rectangular slices (p<0.05). The shrinkage ratios of both medicinal mushrooms and edible mushrooms were the least when drying at $50^{\circ}C$ and $70^{\circ}C$, respectively (p<0.05). The changes of color values were less in the medicinal mushrooms dried in the room temperature than in the hot-air dried medicinal mushrooms (p<0.05). However, in case of edible mushrooms, the changes of color values were less in the hot-air dried mushrooms (p<0.05). Rehydration ratios of medicinal mushrooms dried at $50^{\circ}C$ was the highest (p<0.05). In contrast, rehydration ratios of edible mushrooms was the highest when drying in the room temperature (p<0.05). Thus, the hot-air drying at $50^{\circ}C$ would be suggested as the efficient drying method for both medicinal mushrooms and edible mushrooms.

• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.186-192
• /
• 2022

Collagen is one of the most widely used biological materials in medical design. Collagen extracted from marine organisms can be a good biomaterial for tissue engineering applications due to its suitable properties. In this study, collagen is extracted from fish skin of Ctenopharyngodon Idella; then, the freeze drying method is used to design a porous scaffold. The scaffolds are modified with the chemical crosslinker N-(3-Dimethylaminopropyl)-N'-ethyl carbodiimide hydrochloride (EDC) to improve some of the overall properties. The extracted collagen samples are evaluated by various analyzes including cytotoxicity test, SDS-PAGE, FTIR, DSC, SEM, biodegradability and cell culture. The results of the SDS-PAGE study demonstrate well the protein patterns of the extracted collagen. The results show that cross-linking of collagen scaffold increases denaturation temperature and degradation time. The results of cytotoxicity show that the modified scaffolds have no toxicity. The cell adhesion study also shows that epithelial cells adhere well to the scaffold. Therefore, this method of chemical modification of collagen scaffold can improve the physical and biological properties. Overall, the modified collagen scaffold can be a promising candidate for tissue engineering applications.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.5
• /
• pp.613-619
• /
• 2013

Konjac gel is known as a low calorie food, because the main component is water. Mugwort has been used for food and medicine for a long time due to itsfunctional property, which contains a lot of vitamins and minerals. Therefore, konjac noodle-added mugwort was prepared. The konjac gel was made by from a centrifuge after adding water, alkali and mugwort power in konjac flour. The centrifuge was used to remove air in the gel. After centrifuging by heating the gel in boiling water for one hour, konjac noodle was made by pressing using a flat heating press. The results are as follows. In the drying process of mugwort freeze drying after blanching in 1% $NaHCO_3$ solution is better than other drying methods. The physical properties (hardness, elasticity, cohesiveness, gumminess) of konjac gel were measured with a Rheometer. The optimum processing conditions were decided by these measured values. The optimum condition of making konjac gel is 9% concentration of konjac flour, a ph of 12.0, $Na_3PO_4$ coagulant and 1.5% concentration of mugwort power in konjac flour.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.62-68
• /
• 1978

Equilibrium moisture content of rough rice is an important factor because it has a close relationship to storage and drying problems. Determination of the EMC for 10 different varieties of rough rice were made in atmospheres of various constant humidities at three different constant temperatures. In addition , some physical properties were also measured for two different levels of moisture content of the samples. The results may be summarized as follows ; 1. Several physical properties of ten different varieties of rough were measured. Significant difference of the properties was appeared between the varieties in which the difference was pronounced in the dimensions of the varieties. Also, all the dimensions were increased as the moisture content of the rough rice was increased from 14 % to 16%. 2. Significant difference of the equilibrium moisture content was also appeared between some of the varieties in which the equilibrium moisture content of Josaengtongil and Minehikari was 24.26% while that of the others was in the range between 18 to 19% at the conditions of relative humidity of 84% and temperature of 47℃ , respectively. Similar pattern was also observed in other conditions. 3. The values of the constant of Henderson's equation were calculated from the data obtained but they are believed to be useful until more precise and complete data are obtained. There was a good agreement between the calculated and experimental results.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.326-344
• /
• 2020

Laccase was applied to improve the drying speed of urushi lacquer to confirm a potential use of laccase as an enzyme additive. As a result of applying laccase of lacquer and white-rot fungi, drying times for both Korean and Chinese specimens were reduced. All of the specimens to which laccase was applied were dried(set to touch) within 60 minutes from the start of the drying, and the drying rate was improved as the content ratio of laccase increased. In addition, although there were differences in hardening drying time between Korean and Chinese lacquers, it was confirmed that hardening drying took place even at room with temperature of 20 ± 2 ℃ and humidity of 55-60%. As a result of lacquer layer analysis of the dried specimens, the drying speed was improved when the content ratio of laccase to urushiol was 5:1, and there were no differences in chromaticity and adhesion, confirmed that the layers were stable. It was observed that the gloss of both Korean and Chinese lacquers were reduced when laccase was applied. However, according to the analysis of FT-IR and Py-GC/MS, the changes in components were not as sufficient to affect the physical properties. Thus, its applicability as an additive was confirmed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.109-110
• /
• 2023

Domestic ultra-hard road repair materials require a lot of time before the road can be opened to traffic. Therefore, in this study, Methyl Methacrylate (MMA) based road repair material was used to improve the above problems. Furthermore, the basic physical properties of MMA-based pavement repair materials are examined to confirm their suitability in concrete pavements. For this study, two types of MMA road repair materials (A type and B type) were selected. Then, the curing of the test specimens prepared for painting was carried out under three conditions. The experimental items were viscosity (drop time) and drying time (set to touch, dry-hard). As a result of the experiment, viscosity (drop time) was faster in type A than in type B. The drying time results were as follows. In the case of set ti touch, both type A and type B dried in about 10 minutes regardless of the curing conditions. In the case of dry-hard, regardless of the curing conditions, A type dried longer than B type, but it dried faster than conventional road repair materials. Therefore, within the scope of this study, it is considered that A type has a high potential for utilization as a road repair material.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.310-316
• /
• 2010

The objective of this study was to determine the optimum manufacturing conditions of whole egg powder with high foaming property sufficient for making sponge cakes. Whole eggs were either desugarized and/or adjusted pH before spray-dried at a temperature of $70^{\circ}C$. The physical properties of the cake were measured, and sensory evaluation was conducted on a 9-point scale. The pH and specific gravities of the foam and batter made from desugarized egg powder did not differ from those of the control, whereas batter made from commercial powder experienced significant loss of cake characteristics. The pH adjustment did not improve the foaming properties of the egg powders. The volume and textural properties of the cakes made from spray-dried egg did not differ from those of fresh egg. The taste and sensory characteristic scores for fresh egg, desugarized whole egg powder, and commercial powder were 5.00, 4.78, and 1.89, respectively. These results indicate that egg powders desugarized and spray-dried at $70^{\circ}C$ are sufficient for making sponge cakes with acceptable physical and sensory attributes.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.13-23
• /
• 2000

This study was carried out to investigate the wood properties for development the proper uses of lesser-known tree species. The tested species are Kebambang(Pentace sp.), Bawang-bawang(Dysoxylum alliaceum Bl .), Garu buaya( Gonystylus brunescens A. Shaw)grown in Indonesia. fundamental wood properties such as anatomical, physical, mechanical and chemical properties and characteristics related to wood processing were examined. The results are summarized as follows : The woods of these species are diffuse porous, coarse textured, and interlocked grained. The heartwood of Kebambang is distinguished clearly to the sapwood, but the heartwood of other species are not distinguished clearly to the softwood. The woods of Kebambang and Bawang-bawang have the moderate weight density and the low strength properties, but Garu buaya has the high weight density and the high strength properties. The woods of these species has high shrinkage. The sawing characteristics of Kebambang are excellent but the other species are moderate. The machining characteristics by planer and drying characteristics of these species are moderate. These woods has poor characteristics in bending processing and decay durability. The wood of Bawang-bawang has high content of the extractives and lignin.

• Journal of the Korea Furniture Society
• /
• v.11 no.2
• /
• pp.25-35
• /
• 2000

This study was carried out to investigate the wood properties for development the proper uses of lesser-known tree species. The tested species are Tamiang(Hydnocarpus woodii) Bangelem (Strombosia zeylanica) and Kamasulan(Anisophyllea ferruginea) grown in Indonesia. fundamental wood properties such as anatomical, physical and chemical properties and characteristics related to wood processing were examined. The results are summarized as follows : These species are diffuse porous, interlocked grained and coarse textured wood. Exceptionally, texture of Tamiang is fine. The heartwoods of these species are not distinguished clearly to the sapwoods. These species have high specific gravity, high shrinkage, and excellent strength properties. However, Tamiang has moderate specific gravity. Sawing characteristics are poor for these species except Tamiang. Sawing characteristics is moderate for Tamiang. Drying characteristics are moderate for Tamiang and Bangelem, and Poor for Kamasulan. The surfacing characteristics by planer are moderate f3r all these species. Bending property and durability are poor. Ash content is low in Bangelem.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.420-425
• /
• 1986

This study was conducted to investigate the influence of air temperature and relative humidity on excessive drying rate of burley tobacco. In experiment I, 4 temperatures and I humidity by day and air curing by night were treated from initial curing stage. In experiment II, 15 combinations of 3 temperatures and 5 humidities were applied from the yellow stage of cure. Yellowish cured leaves resulted from overdrying at high temperature and especially, at low humidity. How- ever, these were not produced at 75-80% RH and under 35$^{\circ}C$ by day with air curing b y night. The proper range of temperature and humidity for desirable color of cured leaf were the combinations of 30$^{\circ}C$, 75-80% RH or 35$^{\circ}C$, 80-85% RH. As excessive drying leaves increased, physical properties of cured leaves were poorer and chemical contents were less decomposed.