• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.53-58
• /
• 2015

Polycarbonate (PC)/graphene oxide (GO) composites with 3 phr of GO were prepared by using a twin screw extruder at 240, 260, and $280^{\circ}C$ after mixing the solution with chloroform. It was confirmed by DSC and TGA that the glass transition temperature ($T_g$) of PC/GO composites were not changed and the thermal stability was the best in case of the extrusion temperature at $260^{\circ}C$. Thermo mechanical properties of PC/GO composites according to extrusion temperatures were measured by dynamic mechanical analysis (DMA). Storage moduli of PC/GO composites were higher than that of pure PC and there was no detectable changes at varying the extrusion temperature. Based on these results, the extrusion temperature of PC/GO composites was fixed at $260^{\circ}C$. The degree of the chemical reaction of PC/GO composites with respect to the GO reduction time was confirmed by the C-H stretching peak at $3000cm^{-1}$ and the degree of the chemical reaction was similar to that of GO when the reduction time was 1 h. A decrease in the complex viscosity as a function of the GO reduction time was detected by dynamic rheometer, which may be originated from the enhancement of GO dispersion by PC-GO reaction. The GO dispersion was confirmed by scanning electron microscope (SEM).

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.73-79
• /
• 2017

Maleic anhydride (MAH) grafted polypropylene (PP-g-MAH) copolymers were prepared by changing MAH and styrene monomer (SM) content, using a twin screw extruder at $190^{\circ}C$. The grafting degree was measured by non-aqueous back titration method. The grafting degree of PP-g-MAH-SM copolymer was higher than that of PP-g-MAH at the same MAH content. PP-g-MAH-SM/kenaf fiber (KF) composites were also prepared by using a PP-g-MAH as a matrix at $200^{\circ}C$ and the KF content was fixed at 20 wt%. Based on the degradation temperature investigated by TGA, the thermal stability of PP-g-MAH-SM/KF composites was more enhanced than that of PP-g-MAH only. Mechanical properties of the composites were also improved when MAH and SM applied together. The adhesion degree between the copolymer and KF was confirmed by both SEM pictures of the fractured surface and contact angles.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.397-401
• /
• 2016

A new solid oxidizer, pyridinium dinitramide (Py-DN) is a low toxic energetic material which can be utilized as a HPGP (high performance green propellant). In this work, Py-DN was synthesized using various starting materials including potassium sulfamate, pyridine hydrochloride, strong nitric acid and sulfuric acid. Physical and chemical properties of the Py-DN were characterized using UV-Vis, FT-IR and a thermal analyzer and their properties were compared to those of previously prepared salts including ammonium dinitramide[ADN, $NH_4N(NO_2)_2$] and guanidine dinitramide[GDN, $NH_2C(NH_2)NH_2N(NO_2)_2$] in our lab. Endothermic and exothermic decomposition temperatures of Py-DN were $77.4^{\circ}C$ and $144.7^{\circ}C$, respectively. The combustion caloric value was 1739 J/g, which is thermally more sensitive than that of conventional dinitramides. It may enable to lower the decomposition temperature, which can reduce preheating temperature required for satellite thruster applications.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.24-30
• /
• 2014

3-Amino-1,2,4-triazole (ATA) (2.5 and 5.0 phr) was incorporated into a immiscible maleated ethylene propylene diene rubber(mEPDM)/maleated high density polyethylene(mHDPE) (50 wt%/50 wt%) blend by melt mixing. Effects of the ATA on structure, mechanical and rheological properties of the blend was investigated. FT-IR and DMA results revealed that supramolecular hydrogen bonding interactions between the polymer chains occur by reaction of ATA with maleic anhydride grafted onto the component polymers in the blend, which induces the physical crosslinks in the blend. FE-SEM analysis showed that mEPDM forms a dispersed phase in continuous mHDPE matrix, and the blend with the ATA has finer phase morphology as compared to the blend without the ATA. By the addition of ATA in the blend, there were significant increases in tensile strength, modulus and elongation-at-break as well as elastic recoverability. Melt rheology studies revealed that ATA induced substantial increase in storage modulus and complex viscosity of the blend at the melt state.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.742-748
• /
• 2005

Transparent conductive indium-tin oxide (ITO) films are widely used as transparent electrodes for flat panel displays. Many of the ITO films for practical use have been prepared by magnetron sputtering, chemical vapor deposition, electron beam evaporation, etc. An oxide target composed of 10 wt% $SnO_2$ and 90 wt% $In_2O_3$ has been deposited onto polycyclic olefin polymer (POP) substrate by electron beam evaporation. POP has a higher glass transition temperature ($Tg=330^{\circ}C$) than other conventional polymers. In this study, the effects of substrate temperature and the $O_2$ introduction flow rate were investigated in terms of physical, electrical and optical properties of deposited ITO films. We investigated the effects of processing variables such as substrate temperature and the oxygen introduction flow rate. The best electrical and optical properties of deposited ITO films obtained from this study were electrical resistivity value of ${\rho}=1.78{\times}10^{-3}{\Omega}{\cdot}cm$ and optical transmittance of about 85% at 8 sccm (Standard Cubic Centimeter per Minute) $O_2$ introduction flow rate, $5{\AA}/sec$ deposition rate, $1000{\AA}$ deposited ITO thickness and $200^{\circ}C$ substrate temperature.

• Applied Biological Chemistry
• /
• v.38 no.1
• /
• pp.83-89
• /
• 1995

Changes in physical, chemical and microbiological characteristics of rice-doenjang prepared with two different methods with or without soak treatment were investigated during 60 days of aging at $32^{\circ}C$ and $15^{\circ}C$. The pH of soak-treated rice-doenjang decreased slowly, but that of nonsoak-treated rice-doenjang decreased rapidly at the initial aging stage with the aging temperature of $32^{\circ}C$, resulting in pH 5.1 after the 60 days of aging time. Reducing sugar contents increased up to the $30{\sim}50$ days of aging time and decreased thereafter. The contents of soluble nitrogen, formol nitrogen, ammoniacal nitrogen and amino nitrogen were more affected by preparation methods than by aging temperatures. Color values depended not only on preparation methods but also on aging temperatures. There were no significant differences in the bacterial counts of rice-doenjang, while apparent differences in the yeast and mold counts by aging temperatures were observed. These results suggested that the properties of soak-treated rice-doenjang were less changed than those of nonsoak-treated rice-doenjang by aging time and temperature. And, with a view point of nitrogen compounds, aging time could be reduced by soak treatment.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.185-190
• /
• 2008

In order to increase the surface area of electrodes for electrosorption, porous carbon electrodes were fabricated by a wet phase inversion method. A carbon slurry consisting of a mixture of activated carbon powder (ACP), polyvinylidene fluoride (PVdF), and N-methyl-2-pyrrolidone (NMP) as a solvent was cast directly on a graphite sheet. The cast film was then immersed in pure water for phase inversion. The physical and electrochemical properties of the electrodes were investigated using scanning electron microscopy (SEM), porosimetry, and cyclic voltammetry. The SEM images verified that the pores of various sizes were formed uniformly on the electrode surface. The average pore sizes determined for the electrodes fabricated with various NMP contents ranged from 64.2 to 82.4 nm and the size increased as the NMP content increased. All of the voltammograms showed a typical behavior of charging and discharging characteristic at the electric double layer. The electrical capacitance ranged from 3.88 to $5.87F/cm^2$ depending on the NMP contents, and the electrical capacitance increased as the solvent content decreased. The experimental results showed that the solvent content is an important variable controlling pore size and ultimately the capacitance of the electrode.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.479-486
• /
• 2010

The purposes of this study are to investigate the description of scientifically debatable carbonic acid in the Korean high school textbooks, characterize the physical properties of 'carbonic acid solutions' by using an MBL set-up and compare the properties with textual ones. Four different aqueous solutions of carbon dioxide have been prepared and analyzed: naturally aerated aqueous solution, dry ice-dissolving solution, $CO_2$-bubbling solution and commercial carbonic acid water. Experimental findings showed that pH and conductivity of these 4 solutions ranged from 3.85 to 5.66 and from 0.21 ${\mu}S$/cm to 272.1 ${\mu}S$/cm, respectively. Out of these solutions, the dissociation constant($K_{a1}$) of the bubbling solution at room temperature could be calculated to $5.7{\times}10^{-7}$ which value is comparable to the textual $4.3{\times}10^{-7}$ within experimental errors, which means that textual compound is not pure carbonic acid but the equilibrated mixture of carbonic acid and the aqueous solution of carbon dioxide. On the other hand, textual analysis showed that most of high school textbooks used carbonic acid as an example of weak acid and buffer solution of the blood but none of them distinguished the carbonic acid from the aqueous solution of carbon dioxide. Only one textbook, however, tiered two species in the chemical equation.

• Applied Biological Chemistry
• /
• v.46 no.2
• /
• pp.117-122
• /
• 2003

Starches from 4 rice cultivars, including Whachungchalbyeo and Whachungbyeo, together with two correspondiug conversion mutants with giant embryonic phenotype, Whachungchal-giant embryonic rice and Whachung-giant embryonic rice, were isolated to compare its physico-chemical properties. The amylose content and the length of glucose chains in the fractionated amylose was reduced in response to conversion of the rice cultivars for developing giant embryonic phenotype. For the fine structure of amylopectin, conversion to giant embyonic rice cultivars accompanied with slight increase in the length of B chain plus decrease in the amount of A chain, and also a slight increase in average glucose chains length of amylopectin fractions could be observed. X-ray diffractogram revealed 4 cultivars to be the representative A types. We could also obtain the results that the hydrolysis rate by glucoamylase in the waxy rice cultivars decreased in response to conversion to the giant embryonic rice cultivars, while the rate increased in the non-waxy rice cultivas. Termination temperature for gelatinization was observed to decrease in response to conversion into the giant embryonic rice cultivars, however, the enthalpy for gelatinization was found to increase with the same conversion process.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.172-178
• /
• 1997

Polyaniline(PANI)-stearic acid(SA) composite monolayer was formed at the air-water interface. The stearic acid as a surfactant was used to promote PANI monolayer formation. Uniform PANI-SA monolayer assemblies with Y type and transfer ratio of ca. 1 were fabricated using the Langmuir-Blodgett(LB) technique. The PANI-SA composite LB films with high electrical conductivity of $10^{-1}{\sim}10^{-2}S/cm$ were obtained by doping of HCl or $I_2$, and their conductivity revealed essentially close value as that of conventional PAHI-HCl complex. Especially, iodine is found to be the most promising dopant, since it gives a remarkable stability for the application as a polymer electrode in the MIM molecular device consisted of acceptor, sensitizer, and donor. The structure and physical properties of PANI-SA LB films were investigated through the near-ir UV, FT-IR, and Cyclic voltammetry.