• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.97-104
• /
• 2015

Due to the introduction of various IT devices, including the recently smartphones and the widespread use of the car navigation system to the location-based information service space has been increased. Spatial information users have been requiring higher levels of quality. In this paper, we study how to build accurate three-dimensional space information by integrating MMS(Moblie Mapping System) survey and airborne survey data. Thus, to analyze the tendency of deviation between the MMS survey and airborne survey data observed in the experimental region, the deviation tendency of the data, it was confirmed that was not consistent. Deviation correction model to select how to change the georeferencing information directly contained in the GPS/INS processing results for the determination, classifies the standard is a method for acquiring the correction reference point coordinates using the calibration model, and analyzed their advantages and disadvantages. With the information of the reference point obtained by airborne photograph of a project, using the method of correcting the MMS survey data. Not only clear the deviation existing between the MMS survey data, it was possible to confirm that the deviation exists between the airborne survey data and MMS survey data was also almost erased.

• Journal of Life Science
• /
• v.30 no.11
• /
• pp.990-998
• /
• 2020

This study was conducted to evaluate the hair-growth promotion effect in C57BL/6 mice of a new substance mixed with Allium cepa (red)-bioconversion extract and Angelica gigas Nakai. The ethanol extract of Allium cepa (red) was bioconverted through the use of the Bacillus subtilis KJ-3 (BS3) strain, which was named Red-BCQ. The quercetin content of Red-BCQ increased by about 7.4-fold after bioconversion. Angelica gigas Nakai extract (Agnex) contains a large amount of coumarins such as decursin (D) and decursinol angelate (DA). A 1 mg portion of Agnex contained 0.4146 mg of D and 0.3659 mg of DA. Minoxidil has been known to promote hair growth. In this study, the hair-growth promotion effects of Red-BCQ, Agnex, and a mixture of both Red-BCQ and Agnex were compared with 5% minoxidil. Twenty-five mice were divided into five experimental groups including saline (CON), 5% minoxidil (PCON), Red-BCQ (RA), Agnex (AG), and a Red-BCQ-Agnex mixture (RAG)-treated group. Samples were administered orally once a day at a fixed time for 4 weeks. Hair growth was monitored by photograph at 7, 14, 21, and 28 days. We also observed 5α-reductase, alkaline phosphatase (ALP), γ-glutamyl transpeptidase (γ-GT), insulin-like growth factor (IGF)-1, transforming growth factor (TGF)-β1, antioxidant enzyme, and the hair follicles of the skin tissue. In all the results, the RAG-administered group showed greater antioxidative and hair-growth promotion effects than the other groups. These data suggest that RAG has potent stimulating activity on hair growth in C57BL/6 mice.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.141-149
• /
• 2010

Three-dimensional geo-spatial information is important for the efficient use and management of the country and the three-dimensional expression and analysis of urban projects, such as urban plans devised by local governments and urban management. Thanks to the revitalization of the geo-spatial information service industry, it is now being variously used not only in public but also private areas. For the creation of high-guiltily three-dimensional geo-spatial information, emphasis should be placed on not only the quality of the source image and three-dimensional geo-spatial model but also the level of visualization, such as level of detail and texturing. However, in the case of existing three-dimensional geo-spatial information, its establishment process is complicated and its data are not updated frequently enough, as it uses ready-created digital maps. In addition, as it uses Ortho Images, the images exist Relief displacement. As a result, the visibility is low and the three-dimensional models of artificial features are simplified to reach LoD between 2 and 3, making the images look less realistic. Therefore, this paper, analyzed the quality of three-dimensional geo-spatial information created using the three-dimensional modeling technique were applied using Digital photogrammetry technique, using digital aerial photo images by an existing large-format digital camera and multi-looking camera. The analysis of the accuracy of visualization information of three-dimensional models showed that the source image alone, without other visualization information, secured the accuracy of 84% or more and that the establishment of three-dimensional spatial information carried out simultaneously with filming made it easier to gain the latest data. The analysis of the location accuracy of true Ortho images used in the work process showed that the location accuracy was better than the allowable horizontal position accuracy of 1:1,000 digital maps.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.3-9
• /
• 2014

With broadcasting telecommunication, rapid change detection, and construction of spatial information, a long reconnaissance, resources detection in dangerous area and natural disasters, which are difficult for manned aerial vehicles to perform, international recognition in UAV merely being used for limited military purposes has been changed and its demand for both civil and military purpose have been increased. However, considering the current situation that availability of UAV varies and its working areas also broaden, the stability of UAV and the problems of privacy protection are more important in integrated operation of UAV. In particular, the application of UAV system is urgent for the area where rapid decision making due to expedite data construction such as disaster, calamity, and the acquisition of spatial information for small area are required. However, since technical stability for UAV system and institutional regulation in regard of spatial information are not examined, and UAV system has not been integrated with aerial photograph, the limitation of UAV system has been presented. Thus, this study is aimed at analyzing domestic and foreign research trend and institutional research trend in terms of integrated UAV operation, and proposing its implications and the availability of integrated UAV operation for future national spatial information data construction.

• Journal of Korean Society of Forest Science
• /
• v.76 no.1
• /
• pp.41-50
• /
• 1987

The various conditions of photographs, especially kinds of films, combinated filters and seasons are important factors for forestry purpose aerial photography. In this paper the variations of tones were compared between color and color infrared, panchromatic black and white and infrared black and white, and among false color photographic images created by using 3 kinds of filters when prints are made. Color infrared film was good for identifying tree species, for its spectral signatures had a greater range of tones and hues than color signatures. In that case taken in May were more effective than taken April. False color photographs were not so good as color photographs because they were mostly dark and indistinct. Infrared black and white film with medium red filter showed potential for separating broad-leaved forests from conifers. MSS composed photographs, when composed with proper bands and densities, were proved useful for distinguishing land use types but not applicable to more detailed practices such as forest type separation and tree species identification.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.143-154
• /
• 2004

The researchers, who seek geological and environmental information, depend on the remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, the adverse weather conditions and the expensive equipment can restrict that the researcher can collect their data anywhere and any time. To allow for better flexibility, we have developed a compact, a multi-spectral automatic Aerial photographic system(PKNU 2). This system's Multi-spectral camera can catch the visible(RGB) and infrared(NIR) bands($3032{\times}2008$ pixels) image. Visible and infrared bands images were obtained from each camera respectively and produced Color-infrared composite images to be analyzed in the purpose of the environment monitor but that was not very good data. Moreover, it has a demerit that the stereoscopic overlap area is not satisfied with 60% due to the 12s storage time of each data, while it was possible that PKNU 2 system photographed photos of great capacity. Therefore, we have been developing the advanced PKNU 2(PKNU 3) that consists of color-infrared spectral camera can photograph the visible and near infrared bands data using one sensor at once, thermal infrared camera, two of 40 G computers to store images, and MPEG board to compress and transfer data to the computer at the real time and can attach and detach itself to a helicopter. Verification and calibration of each sensor(REDLAKE MS 4000, Raytheon IRPro) were conducted before we took the aerial photographs for obtaining more valuable data. Corrections for the spectral characteristics and radial lens distortions of sensor were carried out.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.87-98
• /
• 2012

A river boundary is defined as the intersection between a main stream of a river and the land. Mapping of the river boundary is important for the protection of the properties in river areas, the prevention of flooding and the monitoring of the topographic changes in river areas. However, the utilization of the ground surveying technologies is not efficient for the mapping of the river boundary due to the irregular surfaces of river zones and the dynamic changes of water level of a river stream. Recently, the spatial information data sets such as the airborne LiDAR and aerial images are widely used for coastal mapping due to the acquisition of the topographic information without human accessibility. Due to these advantages, this research proposes a semi-automatic method for mapping of the river boundary using the spatial information data set such as the airborne LiDAR and the aerial photographs. Multiple image processing technologies such as the image segmentation algorithm and the edge detection algorithm are applied for the generation of the 3D river boundary using the aerial photographs and airborne topographic LiDAR data. Check points determined by the experienced expert are used for the measurement of the horizontal and vertical accuracy of the generated 3D river boundary. Statistical results show that the generated river boundary has a high accuracy in horizontal and vertical direction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.171-188
• /
• 2013

Landuse changes and cadastral information error categories in the four major river areas were analyzed for the use of policy data as cadastral re-arrangement of national and public lands would be required, using high-resolution air-photographs and cadastral maps before and after the river development. The study sites were the river areas of 40km around four dams of the Nakdong river where their landuses were changed most. As the results, national and public lands reached 79.9% of land parcels and 93.3% of land areas of the study sites similar with those of the four river areas, 84.3% of land parcels and 85.5% of land areas. The landuse classification of the study sites before the four river development was consisted most of 'river'(71.6%) and 'rice field'(12.3%), but after the development the 'river' was reduced to 42.7% and 'park area'(19.6%) including sport fields and 'mixed lots'(20.8%) were increased. Also, 86.7% of land parcels before the development could be reduced after the development if administrative districts and land ownerships were not considered. Cadastral information error categories can be found as cadastral polygon missing, polygon overlap, location and boundary non-coincidence, small polygon generation, and non-coincidence between cadastral boundary and river boundary. Landuse change monitoring method using air-photographs will be useful to analyze landuse state through fast information aquisition and to manage properties of national and public lands such as river areas.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.84-91
• /
• 2009

This paper presents an online partial 3D modeling methodology that uses a mobile augmented reality system and aerial photographs, and a tracking methodology that compares the 3D model with a video image. Instead of relying on models which are created in advance, the system generates a 3D model for a real building on the fly by combining frontal and aerial views. A user's initial pose is estimated using an aerial photograph, which is retrieved from a database according to the user's GPS coordinates, and an inertial sensor which measures pitch. We detect edges of the rooftop based on Graph cut, and find edges and a corner of the bottom by minimizing the proposed cost function. To track the user's position and orientation in real-time, feature-based tracking is carried out based on salient points on the edges and the sides of a building the user is keeping in view. We implemented camera pose estimators using both a least squares estimator and an unscented Kalman filter (UKF). We evaluated the speed and accuracy of both approaches, and we demonstrated the usefulness of our computations as important building blocks for an Anywhere Augmentation scenario.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.4
• /
• pp.329-334
• /
• 2005

Polymethyl-methacrylate(PMMA; Artecoll$^{(R)}$) microspheres suspended 1 : 3 in a 3.5% collagen solution has been used as an injectable implant for long lasting correction of wrinkles and minor skin defects. The patients with mandibular prognathism have increased necessity for nasal augmentation. Usually these patients usually get an additional rhinoplasty after orthognathic surgery. The purpose of this study is to evaluate the result of PMMA injection for nasal ridge augmentation simultaneously with the orthognathic surgery. PMMAs were injected to the nasal dorsum of 13 patients with mandibular prognathism to augment the nasal ridge at the end of the orthognathic surgery. The cephalometric X-ray and clinical facial photograph were taken at 2, 4 and 6 months after operation. Using S-N line, we calculated the change of soft tisuue on the nasal ridge and also investigated the degree of patients satisfaction at 6 months after operation. Most of the patients were satisfied with their nasal ridge height status from moderate to good degree. The average amount of nasal ridge augmentation was $1.4{\pm}0.5$ mm immediately after operation, $1.2{\pm}0.4$ mm at 2 months after operation. The postoperative nasal ridge height seemed to be remained stable after 2 months. Intraoperative PMMA injection is considered to be simple and effective technique which can be used for the minor augmentation of nasal ridge in the orthognathic patients.