• 펄프종이기술
• /
• 제40권5호
• /
• pp.53-59
• /
• 2008

This study was carried out to investigate the effect of photocatalysis using $TiO_2$ and UV applied for the COD reduction of wastewater in linerboard mill. Trials were done to obtain the optimum addition amounts of $TiO_2$ and $H_2O_2$ to the wastewater and find an appropriate pH condition for photocatalysis on $TiO_2$ for degrading COD. The photocatalytic reaction was applied to the wastewater collected after secondary activated sludge treatment in WWTP of linerboard mill. The optimum application of photocatalysis reaction was obtained under the addition conditions of 2 g/L of $TiO_2$ and 200 mg/L of $H_2O_2$ at pH 3.0, respectively. The removal efficiency of $SCOD_{Cr}$ by photocatalytic treatment was 86.4 % and higher than Fenton treatment in which removal efficiency was 67.4 %. It was concluded that the photocatalytic process using $TiO_2$ and UV could be applied to the wastewater treatment in linerboard mill and also to the dramatic drop-off in NBDCOD load from wastewater of tertiary treatment in WWTP.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.226-232
• /
• 2020

Bismuth vanadate (BiVO₄) is considered a potentially attractive candidate for the visible-light-driven photodegradation of organic pollutants. In an effort to enhance their photocatalytic activities, BiVO₄ nanofibers with controlled microstructures, grain sizes, and crystallinities are successfully prepared by electrospinning followed by a precisely controlled heat treatment. The structural features, morphologies, and photo-absorption performances of the asprepared samples are systematically investigated and can be readily controlled by varying the calcination temperature. From the physicochemical analysis results of the synthesized nanofiber, it is found that the nanofiber calcines at a lower temperature, shows a smaller crystallite size, and lower crystallinity. The photocatalytic degradation of rhodamine-B (RhB) reveals that the photocatalytic activity of the BiVO₄ nanofibers can be improved by a thermal treatment at a relatively low temperature because of the optimization of the conflicting characteristics, crystallinity, crystallite size, and microstructure. The photocatalytic activity of the nanofiber calcined at 350℃ for the degradation of RhB under visible-light irradiation exhibits a greater photocatalytic activity than the nanofibers synthesized at 400℃ and 450℃.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.181-188
• /
• 2018

Photocatalytic oxidation in the presence of Fe-doped, Zn-doped or Fe-Zn co-doped $TiO_2$ was used to effectively decompose humic acids (HAs) in water. The highest HAs removal efficiency (65.7%) was achieved in the presence of $500^{\circ}C$ calcined 0.0010% Fe-Zn co-doped $TiO_2$ with the Fe:Zn ratio of 3:2. The initial solution pH value, inorganic cations and anions also affected the catalyst photocatalytic ability. The HAs removal for the initial pH of 2 was the highest, and for the pH of 6 was the lowest. The photocatalytic oxidation of HAs was enhanced with the increase of the $Ca^{2+}$ or $Mg^{2+}$ concentration, and reduced when concentrations of some anions increased. The inhibition order of the anions on $TiO_2$ photocatalytic activities was $CO{_3}^{2-}$ > $HCO_3{^-}$ > $Cl^-$, but a slightly promotion was achieved when $SO{_4}^{2-}$ was added. Total organic carbon (TOC) removal was used to evaluate the actual HAs mineralization degree caused by the $500^{\circ}C$ calcined 0.0010% Fe-Zn (3:2) co-doped $TiO_2$. For tap water added with HAs, the $UV_{254}$ and TOC removal rates were 57.2% and 49.9%, respectively. The $UV_{254}$ removal efficiency was higher than that of TOC because of the generation of intermediates that could significantly reduce the $UV_{254}$, but not the TOC.

• 한국대기환경학회지
• /
• 제19권1호
• /
• pp.85-92
• /
• 2003

A new type of catalytic filers has been developed in this work. A porous photocatalytic filter was prepared by coating the titania (anatase phase) powder onto the woven metal mesh. The coating sol was prepared with unique cera-mic binder, and would assist drying condition and enhance the mechanical strength of the final ceramic filers. As a result of the test for acetone decomposition, it was found to be quite effective for the photocatalytic reaction as good at conventional glass reactors which were coated inside. The present filter type reactor is expected as one of plausible devices for the simultaneous treatment of gas - particulate materials.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.80-86
• /
• 2013

본 연구에서는 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템을 활용하여 악취 가스인 황화수소 및 휘발성유기화합물(VOC)인 에탄올 및 톨루엔이 함유된 폐가스처리를 수행하고, 그 연구결과를 상용 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템을 활용한 연구결과와 비교 및 평가하였다. 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템의 경우는 1단계 운전에서 에탄올 및 톨루엔의 제거율은 각각 80% 및 20% 값을 계속 유지하였으나, 에탄올의 제거율은 톨루엔과 다르게 점점 떨어져서 1단계 끝에는 제거율 40% 값을 보였다. 한편 황화수소의 제거율은 100%에서 90%로 감소하였다. 에탄올의 제거율은 2단계 운전에서 10% 값을 보여서 더욱 감소하였으나, 황화수소 및 톨루엔 제거효율은 처리대상 폐가스의 톨루엔 부하가 4배로 급격히 증가하였음에도 불구하고 제거효율이 각각 90% 및 20% 값을 그대로 유지하였다. 3단계 운전은 알루미늄 코팅된 반사막필름을 광촉매반응기에 사용한 결과로서, 에탄올 및 톨루엔의 제거율은 각각 약 5%가 증가한 15% 및 25%의 제거율을 보였다. 한편 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템의 에탄올, 황화수소 및 톨루엔 제거율은 1단계 운전에서 각각 10%, 97% 및 100% 값을 유지하였다. 그러나 2단계 운전에서 에탄올, 황화수소 및 톨루엔 제거율은 각각 5%, 95% 및 2~3% 미만의 제거율을 보여서 에탄올과 황화수소는 제거율이 약간 저하되었으나 톨루엔의 경우에는 완전 제거에서 급락하였다. 또한 에탄올, 황화수소 및 톨루엔 모든 경우에서 반사막필름의 효과를 전혀 보지 못하였다. 따라서 상용 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템에서 에탄올, 황화수소 및 톨루엔 제거는 부직포필터의 혐수성 VOC에 대한 흡착능에 주로 기인하였고, 광촉매 활성에 의한 제거는 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템보다 훨씬 미미하였다.

• Journal of Electrochemical Science and Technology
• /
• 제3권1호
• /
• pp.44-49
• /
• 2012

Electrochemical and photochemical techniques have been proved to be effective for the removal of organic pollutants in textile wastewater. The present study deals with degradation of synthetic textile effluents containing reactive dyes and assisting chemicals, using electro oxidation and photo catalytic treatment. The influence of various operating parameters such as dye concentration, current density, supporting electrolyte concentration and lamp intensity on TOC removal has been determined. From the present investigation it has been observed that nearly 70% of TOC removal has been recorded for electrooxidation treatment with current density 5 mA/$dm^2$, supporting electrolyte concentration of 3 g/L and in photocatalytic treatment with 250 V as optimum lamp intensity nearly 67% of TOC removal was observed. The result indicates that electro oxidation treatment is more efficient than photocatalytic treatment for dye degradation.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.87.3-88
• /
• 2003

TiO$_2$photocatalytic ozonation was attempted to disinfect fungal pathogens causing postharvest spoilage of kiwifruits and to decompose fungicide residuals on kiwifruits. TiO$_2$Photocatalytic ozonation process synergistically degraded organic compound and inhibited conidial germination of the fungal pathogen compared to single treatment of ozonation or photocatalysis. The efficient control of fungal spoilage and degradation of residual fungicide on kiwifruits indicate that TiO$_2$photocatalytic ozonation is a very attractive method for postharvest disease control of kiwifruits as an alternative to fungicides application.

• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.170-173
• /
• 2009

This study examined the special technique of photocatalytic degradation (RPODisk) for removal of taste and odor causing materials, algae, and algal toxin. The RPODisk was effective for removal of these troublesome contaminants. It outperformed the fixed media and the UV irradiation for geosmin removal. The RPODisk performance was comparable to the combination of the UV irradiation with TiO2. The RPODisk performance was affected by the rotating speed. The faster the speed was, the better the performance. The RPODisk was also effective for removal of algae and algal toxin. The algal activity reduced by 80% after 30 mins of the treatment. More toxic microcystin (MC)-LR was more difficult to remove than MC-RR. The times for 50% removal were 23.7 mins for MC-LR and 14.1 mins for MC-RR. Almost 100 mins of the contact time was required to completely remove MC-LR at the rotating speed of 260 rpm.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2480-2486
• /
• 2018

Mesoporous $TiO_2$ microspheres were prepared by spray pyrolysis for photocatalysis. Post modification of $TiO_2$ by heat treatment was performed to optimize its photocatalytic performance. First, spherical $TiO_2$ particles with mesoporous structure were synthesized at pyrolysis temperatures of 500, 600, and $700^{\circ}C$. After characterization by XRD, SEM, and $N_2$ adsorption, a sample prepared at $500^{\circ}C$ was found to possess desirable properties for photocatalytic performance through post-modification. In methylene blue degradation, mesoporous $TiO_2$ microspheres synthesized at $500^{\circ}C$ outperformed other microspheres. Furthermore, samples obtained by spray pyrolysis at $500^{\circ}C$ were calcined at various temperatures as a post-modification process. The sample calcined at $350^{\circ}C$ showed improved photocatalytic activity due to optimal anatase crystallinity and surface area.

• International Journal of Computer Science & Network Security
• /
• 제22권6호
• /
• pp.91-96
• /
• 2022

The photocatalytic degradation of salicylic acid takes place in several stages involving coupled phenomena, such as the transport of molecules and the chemical reaction. The systems of transport equations and the photocatalytic reaction are numerically solved using COMSOL Mutiphysics (CM) simulation software. CM will make it possible to couple the phenomena of flow, the transport of pollutants (salicylic acid) by convection and diffusion, and the chemical reaction to the catalytic area (bauxite or TiO2 doped by nanoparticles). The simulation of the conversion rate allows to correctly fit the experimental results. The temporal simulation shows that the reaction reaches equilibrium after a transitional stage lasting over one minute. The outcomes of the study highlight the importance of diffusion in the boundary layer and the usefulness of injecting micro-agitation into the microchannel flow. Under such conditions, salicylic acid degrades completely.