• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.50-56
• /
• 2013

Phosphorescent materials coated with titanium dioxide were fabricated and photocatalytic reactions between these materials and VOCs gases were examined. A thin film (approx. 100 nm) of nanosized $TiO_2$ was deposited on the $Sr_4Al_{14}O_{25}$ : $Eu^{2+}$, $Dy^{3+}$, $Ag^+$ phosphor using low-pressure chemical vapor deposition (LPCVD). The characteristics of the photocatalytic reaction were examined in terms of the decomposition of benzene gas using a gas chromatography (GC) system under ultraviolet (${\lambda}$ = 365 nm) and visible light (${\lambda}$ > 420 nm) irradiation. $TiO_2$-coated $Sr_4Al_{14}O_{25}$ : $Eu^{2+}$, $Dy^{3+}$, $Ag^+$ phosphor showed different photocatalytic behavior compared with pure $TiO_2$. $TiO_2$-coated phosphorescent materials showed a much faster photocatalytic decomposition of benzene gas under visible irradiation compared to the pure $TiO_2$ for which the result was practically negligible. This suggests that the extension of the absorption wavelength to visible light occurred through energy band bending by a heterojunction at the interface of the $Sr_4Al_{14}O_{25}-TiO_2$ composite. Also, the $Sr_4Al_{14}O_{25}-TiO_2$ composite showed the photocatalytic decomposition of benzene in darkness due to the photon light emitted from the $Sr_4Al_{14}O_{25}$ phosphors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.423-423
• /
• 2011

Zinc oxide is metal oxide semiconductor with the 3.37 eV bandgap energy. Zinc oxide is very attractive materials for many application fields. Zinc Oxide has many advantages such as high conductivity and good transmittance in visible region. Also it is cheaper than other semiconductor materials such as indium tin oxide (ITO). Therefore, ZnO is alternative material for ITO. ZnO is attracting attention for its application to transparent conductive oxide (TCO) films, surface acoustic wave (SAW), films bulk acoustic resonator (FBAR), piezoelectric materials, gas-sensing, solar cells and photocatalyst. In this study, we synthesized ZnO nanoparticles and defined their physical and chemical properties. Also we studied about the application of ZnO nanoparticles as a photocatalyst and try to find a enhancement photocatalytic activity of ZnO nanorticles.. We synthesized ZnO nanoparticles using spray-pyrolysis method and defined the physical and optical properties of ZnO nanoparticles in experiment I. When the ZnO are exposed to UV light, reduction and oxidation (REDOX) reaction will occur on the ZnO surface and generate O2- and OH radicals. These powerful oxidizing agents are proven to be effective in decomposition of the harmful organic materials and convert them into CO2 and H2O. Therefore, we investigated that the photocatalytic activity was increased through the surface modification of synthesized ZnO nanoparticles. In experiment II, we studied on the stability of ZnO nanoparticles in water. It is well known that ZnO is unstable in water in comparison with TiO2. Zn(OH)2 was formed at the ZnO surface and ZnO become inactive as a photocatalyst when ZnO is present in the solution. Therefore, we prepared synthesized ZnO nanoparticles that were immersed in the water and dried in the oven. After that, we measured photocatalytic activities of prepared samples and find the cause of their photocatalytic activity changes.

• 에너지공학
• /
• 제14권2호
• /
• pp.105-111
• /
• 2005

본 연구는 마이크로 채널 반응기를 이용하여 다양한 실험조건에서 D-glucose용액을 이용하여 광촉매 분해특성을 연구하였다. Titanium oxysulfate의 수산화반응을 통하여 합성한 $TiO_2$수용액을 이용하여 마이크로 채널 반응기에 $TiO_2$를 코팅하였다. D-glucose광촉매 분해특성은 반응기의 주입유속이 증가함에 따라 증가하는 것으로 나타났으며 반응속도 상수와 Langmuir 흡수 제수를 다양한 실험조건에서 계산하였다. 또한 반응 시스템에서의 광효율을 계산하였다 따라서 이 연구는 배치 시스템에 적용된 $TiO_2$코팅이 되어 있는 마이크로 채널 반응기의 광분해 특성을 이해하기 위한 것이다.

• 한국환경과학회지
• /
• 제13권10호
• /
• pp.921-928
• /
• 2004

The photocatalytic decolorization of Rhodamine B (RhB) was studied using immobilized $TiO_2$ and fluidized bed reactor. Immobilized $TiO_2$(length: 1$\~$2 mm, width: 1$\~$3 mm, thickness: 0.5$\~$2 mm) onto silicone sealant was employed as the photocatalyst and a 30 W germicidal lamp was used as the light source and the reactor volume was 4.8 L. The effects of parameters such as the amounts of photocatalyst, initial concentration, initial pH, superficial velocity, $H_2O_2$ and anion additives. ($NO_3^{-},\;SO_4^{2-},\;Cl^{-},\;CO_3^{2-}$) The results showed that the optimum dosage of the immobilized $TiO_2$ were 87.0 g/L. Initial removal rate of RhB of the immobilized $TiO_2$ was 1.5 times higher than that of the powder $TiO_2$ because of the adsorption onto the surface of immobilized $TiO_2$ In the conditions of acidic pH, initial reaction rate was increased slowly and reaction time was shorted. The effect of anion type on the reaction rate was not much.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.56-61
• /
• 2005

아나타제 $TiO_{2}$, 활성탄, 세라믹섬유를 포함하는 VOC 흡착과 광산화분해 특성을 동시에 갖는 내구성이 우수한 광촉매 종이를 제조하여 그 특성을 분석하였다. 광촉매 종이 제조용 슬러리 내에 함유되어 있는 $TiO_{2}$를 활성탄 및 세라믹섬유 표면에 선택적으로 결합시키기 위한 PDADMAC의 적정농도범위는 $10{\~}15ppm$이었으며, 제지방법에 의해 만들어진 광촉매 종이는 두께 0.4mm, 평량 $380g/m^{2}$을 나타내었다. 제조된 광촉매 종이는 활성탄에 의한 흡착과 $TiO_{2}$에 의한 광산화 분해 반응이 동시에 진행되어 이들 두 반응이 각각 단독으로 진행되는 VOC 제거용 소재에 비하여 아세트알에히드의 제거속도를 크게 증가시켰다. 또한 세라믹섬유-$TiO_{2}$, 활성탄-$TiO_{2}$의 선택적인 결합은 UV 조사시 $TiO_{2}$에 의한 기지내 유기물의 분해를 방지하여 내구성을 개선하는데 효과적이었다.

• 한국대기환경학회지
• /
• 제17권1호
• /
• pp.57-66
• /
• 2001

Gas phase photocatalytic oxidation of tetrachloroethylene (PCE) under 370 nm ultra-violet irradiation was investigated with TiO$_2$ catalyst. During the photocatalytic oxidation of PCE vapor several kinds of intermediate were produced, and the reaction pathways were proposed on the basis of the production sequency of the intermediates. The intermediates in the pathways of PCE oxidation were hexachloroethane, pentachlotoethane, 1, 1, 2-trichloroethane, carbon tetrachl-oride, dichloroacetylchloride, chloroform, 1,1-dichloroethane, phosgene, CO, $CO_2$, HCl, Cl$_2$.

• Journal of Photoscience
• /
• 제10권3호
• /
• pp.231-236
• /
• 2003

TiO$_2$ has been used as photocatalyst since two and half decades ago. The efficiency in its photocatalytic reactions has been improved by increasing the surface area of the photocatalyst by supporting fine TiO$_2$ particles on some porous materials. In this work, heteropolytungstic acid (HPA) - encapsulated into the titanium exchanged SBA-15 mesoporous materials (TiSBA-15) were prepared and characterized. Also their photocatalytic effects on decomposition of phenol were investigated and the photodecomposition rates of the phenol were observed to be increased by 2.5 8 fold, as compared to those observed in the presence of HPA-encapsulated SBA-15 or TiSBA-15 without HPA.

• 환경위생공학
• /
• 제19권2호
• /
• pp.1-6
• /
• 2004

In Bok-Jeong water treatment plant, chlorination is the only technique used for disinfection of drinking water. This disinfecting treatment leads to the formation of trihalomethanes (THMs). This study was carried out to investigate the possibility of improving removal efficiency of THM precursor in the conventional water treatment processes by $TiO_2$ photocatalytic oxidation. Removal efficiencies of DOC, $UV_{254}$, THMFP were low in the conventional water treatment processes. With application of $TiO_2$ photocatalyst, DOC, $UV_{254}$, THMFP were reduced more effectively. As the $TiO_2$ photocatalytic reaction time increased, the removal efficiencies of DOC, $UV_{254}$, THMFP were increased. The $TiO_2$ photocatalytic removal efficiencies of DOC, $UV_{254}$, THMFP were increased with increasing $TiO_2$ dosage. However, over 0.6g/l of $TiO_2$ dosage, the efficiency reached a plateau.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.577-582
• /
• 2004

The photocatalytic degradation of atrazine and PCP, a endocrine disruptors, has been investigated over $TiO_2$ photocatalysts under ultraviolet (UV) light irradiation. The effect of operational parameters, i.e., pH, light intensity and persulphate concentration on the degradation rate of aqueous solution of atrazine and PCP has been examined. The results presented in this work demonstrate that, as pH and the light intensity increased, the photocatalytic reaction rates were enhanced. Individual use of $TiO_2$-persulphate was far more effective than using only $TiO_2$ in atrazine and PCP removal. Based on the overall experimental results, the photocatalytic oxidation of atrazine and PCP with the coated $TiO_2$ photocatalyst is found to be very effective under the operational conditions delineated in this study.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.295-295
• /
• 2012

The $TiO_2$ films were prepared in the $H_2SO_4$ solution containing $NH_4F$ at different anodic voltages, to compare the photocatalytic performances of titania for purification of waste water. The microstructure was characterized by a Field-emission scanning electron microscopy (FE-SEM) and X-ray diffractometry (XRD). Chemical bonding states and co-doped elements of F and N were analyzed using surface X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the co-doped $TiO_2$ films was analyzed by the degradation of aniline blue solution. From the result of diffuse reflectance absorption spectroscopy(DRS), it is indicated that the absorption edge of the F-N-codoped $TiO_2$ films shifted toward visible light area, and the photocatalytic reaction of $TiO_2$ was improved by doping an appropriate contents of F and N.