• Journal of Industrial Technology
• /
• v.17
• /
• pp.249-254
• /
• 1997

Photocatalytic reaction using $TiO_2$ thin film was applied for the inactivation of coliform bacteria and the degradation of formic acid. UV processes coupled with and without $TiO_2$ were tested for the river water samples. It took 5 and 15 minutes, respectively, to obtain 99% destruction of coliform bacteria in the total coliform test, which demonstrated the effectiveness of the photocatalytic reaction. Complete degradation of formic acid determined by TOC analysis was observed in 20 minutes by ozone/photocatalysis, while formic acid was degraded as little as about 20% during the first 100 minutes by ozone treatment alone. When ozone was supplied to the $TiO_2/UV$ system, however, it provided a synergetic effect for the degradation of formic acid.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.85-86
• /
• 2003

Shrink-proofing processing of wool fabrics is practically carried out by means of oxidation of wool with choline and/or covering of wool surface with resins. But, these are not necessarily environmentally friendly process causing a waste fluid containing organic chlorine compounds. Development of alternative method using more environmentally friendly process is desired. In this study, utilization of titanium oxide, TiO$_2$, photocatalytic reaction for the shrink-proofing of wool has been examined. It was found that the treatment of wool by TiO$_2$ photocatalytic reaction gave good shrink-proofing characteristics to wool fabrics.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.1
• /
• pp.88-95
• /
• 1998

The Electron/Hole Pair is generated when the Activation Energy produces by Ultraviolet Ray illumination to the Semiconductor. And $OH^-$ ion produces by Water Photo-Cleavage reacts with Positive Hole. As a result, OH Radical acting as strong oxidant is generated and then Photocatalytic Oxidation Reaction occurs. The Photocatalytic Oxidation can oxidize the chlorophenol to Chloride and Carbon Dioxide easier, safer and shorter than conventional Water Treatment Process With the same degree of chlorination, the $Cl^-$ ion at para (C4) position is most easily replaced by the OH radical. And then, the blocking effect of $OH^-$ ion between the $Cl^-$ ions and $Cl^-$ ions at symmetrical location is easily replaced by the OH radical. For mono-, di-, tri-chlorophenols, there is no obvious difference in decomposition rate, decomposition efficiency and completeness of the decomposition reaction except for 2,3-dichloropheno, 2,4,5-, 2,3,4-trichlorophenol. The decomposition efficiency is higher than 75% and completeness of the decomposition reaction is higher than 70%. Therefore, continuous flow photocatalytic reactor is promising process to remove the chlorinated aromatic compounds which is more toxic than non-chlorinated aromatic compound.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1110-1116
• /
• 2014

The cuprous oxide cubes with the special porous surface constructed by nano-prisms have been successfully fabricated by a solvothermal method. The template-free method is simple and facile without any surfactant. The X-ray powder diffraction (XRD) pattern suggests that the as-prepared product is the pure primitive cubic $Cu_2O$. The effects of the experimental parameters, such as the reaction temperature, reaction time and the concentration of sodium acetate anhydrous, on the morphologies of the products were investigated in detail by the scanning electron microscopy (SEM). Based on the time-dependent experiments, the possible formation mechanism was proposed. Using photocatalytic degrading reactive dyes as the model reaction and xenon lamp to simulate sunlight, the $Cu_2O$ cubes with the porous surface might possess higher photocatalytic activity than those of the commercial $Cu_2O$ powder in the visible-light region, indicating the excellent photocatalytic performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1527-1532
• /
• 2013

The kinetics of photocatalytic degradation of gaseous acetaldehyde and methylethylketone(MEK) were studied by the batch scale of photo-reactor. Variable parameters were initial concentration of acetaldehyde and MEK, water vapor content, and temperature. The photocatalytic degradation rate was increased with increasing concentration of acetaldehyde and MEK, but maintained gentle increase beyond a certain concentration. The Langmuir-Hinselwood model was successfully applied to correlate experimental data. Water vapor inhibited the degradation reaction of acetaldehyde and MEK. The optimum reaction temperature was $45^{\circ}C$ for acetaldehyde and MEK.

• Clean Technology
• /
• v.26 no.4
• /
• pp.311-320
• /
• 2020

In this study, the photocatalytic degradation of rhodamine B (RhB), methyl orange (MO) and methylene blue (MB) was carried out under visible light irradiation using CdS and CdZnS/ZnO photocatalysts prepared by a simple precipitation method. This study focused on examining the effect of physicochemical properties of dye and photocatalyst on the reaction pathway of photocatalytic degradation. The prepared photocatalysts were characterized by XRD, UV-vis DRS and XPS. Both the CdS and CdZnS/ZnO photocatalysts exhibit an excellent absorption in the visible light and the UV light regions. It was observed that the photocatalytic degradation of MO proceeds via the same reaction mechanism on both the CdS and CdZnS/ZnO photocatalysts. However, the photocatalytic degradation of RhB and MB was found to proceed through a different reaction pathway on the CdS and CdZnS/ZnO catalysts. It is interesting to note that MB dimer was formed on the CdS catalyst at the beginning of the photocatalytic reaction, while the MB monomer was degraded during the overall photocatalytic reaction on CdZnS/ZnO. The above results may be mainly ascribed to the difference of band edge potential of the conduction band in the CdS and CdZnS/ZnO semiconductors and the adsorption property of dye on the catalysts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.425-425
• /
• 2011

The photocatalytic decomposition of toluene gas was investigated with $TiO_2$ on nano-diamond powder (NDP) under UV irradiation. Atomic layer deposition (ALD) was used for the growth of $TiO_2$ on the NDP. The structure and surface properties of catalysts were characterized by X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and Transmission Electron Microscopy (TEM). The photocatalytic activity for the toluene decomposition was evaluated by measuring the concentration change of toluene and $CO_2$ gas with gas chromatography (GC)-flame ionization detector (FID) system. The photocatalytic activities of $TiO_2$/NDP catalysts were compared with that of P-25. The rate of initial photocatalytic decomposition of toluene for the $TiO_2$/NDP catalysts was relatively lower when compared to P-25. The photocatalytic activity of P-25 was rapidly decreased with time, whereas, the deactivation of $TiO_2$/NDP catalysts was less pronounced. Therefore, as the reaction time increased, the photocatalytic activity of $TiO_2$/NDP catalysts became higher than that of P-25. The intermediates such as benzaldehyde or benzoic acid, etc were more easily adhered to the active site on the P-25 surface during reaction, resulting in easier deactivation of P-25. These results could be confirmed using FT-IR spectroscopy. We suggest that the NDP used as substrate can reduce the deactivation of $TiO_2$ on the surface.

• Advances in environmental research
• /
• v.4 no.1
• /
• pp.25-38
• /
• 2015

Wastewaters of textile industry cause high volume colour and harmful substance pollutions. Photocatalytic degradation is a method which gives opportunity of reduction of organic pollutants such as dye containing wastewaters. In this study, photocatalytic degradation of C.I. Basic Yellow 28 (BY28) as a model dye contaminant was carried out using Degussa P25 in a photocatalytic reactor. The experiments were followed out at three different azo dye concentrations in a reactor equipped UV-A lamp (365 nm) as a light source. Azo dye removal efficiencies were examined with total organic carbon and UV-vis measurements. As a result of experiments, maximum degradation efficiency was obtained as 100% at BY28 concentration of $50mgL^{-1}$ for the reaction time of 2.5 h. The photodegradation of BY28 was described by a pseudo-first-order kinetic model modified with the langmuir-Hinshelwood mechanism. The adsorption equilibrium constant and the rate constant of the surface reaction were calculated as $K_{dye}=6.689{\cdot}10^{-2}L\;mg^{-1}$ and $k_c=0.599mg\;L^{-1}min^{-1}$, respectively.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.133-139
• /
• 2014

In this research, the photocatalytic degradation of benzothiophene in $TiO_2$ aqueous suspension has been studied. $TiO_2$ photocatalysts are prepared by a sol-gel method. The dominant anatase-structure on $TiO_2$ particles is observed after calcining the $TiO_2$ gel at $500^{\circ}C$ for 1hr. Photocatalysts with various transition metals (Nd, Pd and Pt) loading are tested to evaluate the effect of transition metal impurities on photodegradation. The photocatalytic degradation in most cases follows first-order kinetics. The maximum photodegradation efficiency is obtained with $TiO_2$ dosage of 0.4g/L. The photodegradation efficiency with Pt-$TiO_2$ is higher than pure $TiO_2$ powder. The optimal content value of Pt is 0.5wt.%. Also we investigate the applicability of $H_2O_2$ to increase the efficiency of the $TiO_2$ photocatalytic degradation of benzothiophene. The optimal concentration of $H_2O_2$ is 0.05. The effect of pH is investigated; we obtain the maximum photodegradation efficiency at pH 9. Hydroxy-benzothiophenes and dihydroxy-benzothiophenes are identified as reaction intermediates. It is proposed that benzothiophene is oxidized by OH radical to sequentially form hydroxyl-benzothiophenes, dihydroxybenzothiophenes, and benzothiophenedione.

• Journal of Environmental Science International
• /
• v.17 no.7
• /
• pp.801-808
• /
• 2008

This study was investigated experimental condition which is able to evaluate photocatalytic activity of various commercial $TiO_2$. The experiments were performed for three representative substances (ethanol, phenol and methylene blue) and four kinds of commercial $TiO_2$, under the experimental conditions such as pH, reactant concentration, amount of $TiO_2$, reaction time and UV intensity. The optimum experimental conditions to evaluate photocatalytic activity were as follows : for ethanol, the initial concentration 1000 ppm, initial pH 8, $TiO_2$ loadings 0.1 wt%, and reaction time 90 minutes: for phenol, the initial concentration 200 ppm, initial pH 8, $TiO_2$ loadings 1 wt%, and reaction time 60 minutes: for methylene blue, the initial concentration 200 ppm, initial pH 4, $TiO_2$ loadings 0.5 wt%, and reaction time 30 minutes.