• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.60-68
• /
• 1995

This work wes performed to investigate the photocatalytic decolorization of waste water from textile industries. Methyl orange was used as a target dye with suspended Hombikat TiO$_2$ photocatalyst with a recirculating annular photoreactor. 1 wt % Pt-doped Hombikat thin film tubular reactor with parabolic reflector also wes usedin this experiment. The pH effect and flow rate effect on photobleaching of 0.012 g/l methyl orange solution, AtpH=3 Colour of methyl orange was completely bleached in 30 min with a 20 W UV lamp.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.429-430
• /
• 2003

TiO$_2$를 이용한 휘발성 유기화합물(VOCs)의 광촉매적 제게에 관한 연구는 오염된 공기의 정화를 위한 대안적인 산화공정으로서 현재 많은 연구가 진행되어 오고 있다(A. J. Maira et al., 2001; Rosana M. Alberici and Wilson F. Jardim, 1997). 또한 가시광영역, 암반응 및 수분 등의 영향을 최소화하기 위해 금속 성분을 첨가하여 광촉매적 활성을 높이고자 여러 가지 시도들이 행해져 왔다(Akawat Sirisuk et al., 1999; John L. Falconer and Kimberley A. Magrini-Bair, 1998). (중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.69-72
• /
• 1998

지속적인 경제성장과 산업발달과 더불어 에너지 소비량이 크게 증가하고 있고, 환경문제가 심각해지고 있다. 이에 따라 대기로 배출되는 질소산화물은 산성비 및 도심스모그의 주범이 되는 물질로서, 그 미치는 파장이 사회적으로 매우 크다. 이러한 질소산화물을 제거하는 방법으로서, 기존의 선택적 촉매 및 비촉매 환원법은 고온을 필요로 하므로, 설치 및 운전비가 많이 요구되는 방법들을 대체하기 위해 상온영역에서 조업되는 광촉매를 개발해서, 신기술을 확립하고, 환경규제에 대해 능동적으로 대처하여야 한다. 기존의 탈질공정에서는 부가적인 에너지가 필요하므로, 광촉매를 통한 질소산화물의 저감기술은 에너지 소비가 작다는 장점이 있다. (중략)

• Proceedings of the Korean Society of Potoscience Conference
• /
• spring
• /
• pp.15-15
• /
• 1998

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.9-9
• /
• 1992

막 반응기(membrane reactor)는 365 nm 의 파장을 갖는 UV를 담체튜브 및 코팅막에 조사시켜 막 표면에서 유기물의 산화반응이 일어날수 있도록 고안하였으며 일차적으로 formic acid의 산화효율을 측정하였다. 코팅된 담체는 코팅하지 않은 담체에 비해 flux가 상당히 저하하는 반면에 formic acid의 산화효율은 이에 비례하여 증가하였다. 또한 본 실험의 결과로부터 수처리공정에서 문제시되는 난분해성 유기물질의 산화분해처리에 대한 광촉매 막의 응용성을 제시하고자 한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.31-31
• /
• 2003

최근 각종 산업 기술의 발달과 함께 다량의 악취, 오염 물질이 심각한 사회문제로 대두되고 있다. 특히 산업 현장의 경우, 악취로 인해 작업 환경이 매우 열악하여 환경 설비의 개발이 절실히 요구되고 있다. 본 연구에서는 기존의 스크러버 집진 장치의 친수성 가스를 제거할 수 있는 장점을 유지하면서, 소수성 기체의 제거율이 낮은 단점을 보완할 수 있는 TiO$_2$나노 입자의 광분해 특성을 이용한 스크러버 집진 장치를 제작하였다. TiO$_2$ 광촉매 나노 입자는 실험실에서 합성한 QT를 비롯하여, 국내외에서 생산된 P-25, NT-20, ST-01로 특성 분석을 실시하였다. 광촉매 나노 입자의 특성 분석에는 X선 회절 분석법, 적외선 분광기, 제타 전위 분석기, 동적 광산란 분광기를 사용하였으며, 그 결과 ST-01이 본 실험에 가장 적합한 광촉매로 선정되었다. 악취 및 대기 오염 물질 선정은 염색 가공 공장에서 정련제, 산화 환원제등으로 많이 사용하고 있는 암모니아, 아세트산, 옥탄올, 휘발성 유기물질인 톨루엔, 벤젠으로 하여, 실험실 자체 제작한 batch type과 산업 현장에서 사용할 수 있는 continuous type의 스크러버 이용하여 실험하였다. 이들 물질의 제거율은 가스 크로마토그래피, 자외선/가시광선 분광기를 이용하여 조사하였으며, 친수성 기체인 암모니아와 아세트산의 경우는 기존의 스크러버 효율의 약 70%인 반면에, 광촉매를 이용한 스크러버의 경우 90%이상의 우수한 제거 효과를 보였다. 또한, 기존의 스크러버가 거의 분해를 할 수 없었던 소수성 기체 옥탄올, 톨루엔, 벤젠의 경우는 기존의 스크러버가 약 10%내외를 제거하는 것에 비해, 광촉매를 이용한 스크러버의 경우 약 80% 이상의 제거 효율을 나타내었다. 결과적으로 광촉매를 이용한 스크러버의 제거효율이 기존의 스크러버에 비해, 친수성 가스의 경우 20% 이상, 소수성 가스의 경우70% 이상 향상되었음을 알 수 있었으며, 본 연구를 통해 광분해를 이용한 스크러버가 기존설비의 장.단점을 충분히 보완 가능한 환경 설비임을 확인할 수 있었다.

• Journal of Sensor Science and Technology
• /
• v.32 no.3
• /
• pp.140-146
• /
• 2023

Water quality is crucial for human health and the environment. Accurate measurement of the quantity of organic carbon in water is essential for water quality evaluation, identification of water pollution sources, and appropriate implementation of water treatment measures. Total organic carbon (TOC) analysis is an important tool for this purpose. Although other methods, such as chemical oxygen demand (COD) and biochemical oxygen demand (BOD) are also used to measure organic carbon in water, they have limitations that make TOC analysis a more favorable option in certain situations. For example, COD requires the use of toxic chemicals, and BOD is time-consuming and can produce inconsistent and unreliable results. In contrast, TOC analysis is rapid and reliable, providing accurate measurements of organic carbon content in water. However, common methods for TOC analysis can be complex and energy-intensive because of the use of high-temperature heaters for liquid-to-gas phase transitions and the use of acid, which present safety risks. This study focuses on a TOC analysis method using TiO₂ photocatalysis, which has several advantages over conventional TOC analysis methods, including its low cost and easy maintenance. For TiO₂, rutile and anatase powders are mixed with an inorganic binder and spray-coated onto a glass fiber substrate. The TiO₂ powder and inorganic binder solutions are adjusted to optimize the photocatalytic reaction performance. The TiO₂ photocatalysis method is a simple and low-power approach to TOC analysis, making it a promising alternative to commonly used TOC analysis methods. This study aims to contribute to the development of more efficient and cost-effective approaches for water quality analysis and management by exploring the effectiveness and reliability of the developed equipment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.152-159
• /
• 2017

In marine environment, the durability of concrete and reinforcing steel is known to be deteriorate by the permeation of chloride ion into concrete. In this study the conductive photocatalyst was used to improve the seawater corrosion resistance of the concrete and steel. Mortar and concrete samples were prepared by mixing with various amounts of conductive active carbon and photocatalytic powder($TiO_2$). The compressive strength of concrete was decreased with the increase of the amount of conductive carbon powders. The samples containing conductive carbon and photocatalytic powders showed the superior seawater corrosion resistance compared with the ordinary sample, which was verified by XRF analysis showing the concentration of chloride ion($Cl^-$) of mortars and concretes. The inhibitive effect of photocatalyst against chloride attack was discussed with the diffusion coefficient of chloride ion into mortar and concrete.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.163-169
• /
• 2005

Photocatalytic oxidation of Cu(II)-EDTA has been studied using solar/$TiO_2$ photocatalysis as an energy source. Photocatalysis efficiency on the treatment of Cu(II)-EDTA was investigated using different types of solar collectors as well as by variation of the angles of solar collector solar light intensities, flow rates, and areas of solar collector. effect of $H_2O_2$ and types of $TiO_2$ catalyst on the treatment of Cu(II)-EDTA was also investigated. Removal of Cu(II) and DOC was favorable with a hemispherical collector than with a flat collector Removal of Cu(II) and DOC increased with increasing angles of solar collector up to $38^{\circ}$. Slurry type $TiO_2$ showed four-times higher removal efficiency than immobilized type $TiO_2$. Removal of both Cu(II) and DOC at a clear sky of solar light intensity ranging from 0.372 to $2.265\;mW/cm^2$ was greater than removal at a cloudy day of solar light intensity ranging from 0.038 to $1.129\;mW/cm^2$. From the result of this research that the removal efficiency of Cu(II) and DOC increased as the solar light intensity increased, it can be inferred that quantum yield in the destruction of Cu(II)-EDTA may directly related with the solar light intensity. Removal of Cu(II) increased as increasing the area of solar collector and was similar at lower flow rates white removal of Cu(II) was interfered at higher flow rates. When immobilized $TiO_2$ was used, removal efficiency of Cu(II) increased in the presence of $H_2O_2$ while negligible effect was found in the use of $TiO_2$ slurry.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.765-773
• /
• 2000

The degradation of humic acid using $TiO_2$ coatings was studied, $TiO_2$ coatings were prepared by dip-coating method. Sol solutions for coating were prepared by mixing the gel, which can be produced by the reaction of $TiOCl_2$ and $NH_4OH$ solution, and hydrogen peroxide solution, and hydrolysis of titanium tetraisopropoxide (TTIP). It was shown from XRD that coatings from sol aged at $100^{\circ}C$ for 18h with titanium peroxo solution were crystallized to anatase in the range of temperatures of $25^{\circ}C$ to $500^{\circ}C$. In contrast, those coated from TTIP were crystallized to anatase at temperature above $400^{\circ}C$. So the sols originated from $TiCl_4$ can be applied for not only on the heat-resistance substrates but on the plastic substrates. Thickness and the quality of the films were dependent on the withdrawing speed, the concentration of sol, and the number of coating. The films showed various interference colors depending on the thickness of them. In the case that the films coated 2 times at withdrawing speed of 2.5cm per minute by 0.2M sol, the films had a transparent light blue color with thickness of around 50nm. It was known from the result of photo-degradation by $TiO_2$ coatings using humic acid that the removal efficiency of $COD_{cr}$ was over 85% after illumination of $UV/H_2O_2$ for 40min. and that of UV/VIS absorbable materials was over 95%.