• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.461-466
• /
• 1997

In this paper, we developed the new non-rubbing liquid crystal (LC) alignment techniques in the cell with slanted non-polarized ultraviolet (UV) light irradiation on polyimide (PI) film. It is shown that the uniform alignment for nematic (N) LC is obtained by using slanted non-polarized UV light irradiation on PI surface. We successfully obtained that the pretilt angle of NLC is generated about 3.3 degree in the cell with slanted non-polarized UV light irradiation with 70 degree on PI surface, for the first time. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecular and the PI, which is broken the polymer by slanted non-polarized UV irradiation. Therefore, we concluded that the uniform LC alignment is attributed to anisotropic dispersion force due to photo depolymerization with slanted non-polarized UV light irradiation on PI surface.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.132-133
• /
• 2002

아조벤젠 고분자는 가역적 광이성화 과정에 의한 광유도 복굴절을 일으키는 물질로 광정보저장용 및 광소자용 매질로서 많은 연구가 이루어져 왔다. 일반적으로 아조벤젠 고분자는 rod-like 형태의 안정한 trans 상과 banana-like 형태의 준 안정한 cis 상의 이성체가 존재하고 이 두 이성체는 광에 의해 여기 되어 서로 다른 이성체로의 이성화가 일어나는데, 특히 막대 모양의 trans 상의 분자가 여기 시키는 광의 편광 방향에 수직으로 정렬하면서 복굴절이 유도되며 cis 상의 분자는 복굴절의 유도와 무관하다고 알려져 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.757-760
• /
• 2005

The technology of rapid prototyping (RP) is used for design verification, function test and fabrication of prototype. The current issues in RP are improvement in accuracy and application of various materials. In this paper, a hybrid rapid prototyping system is introduced which can fabricate nano composites using various materials. This hybrid system adopts RP and machining process, so material deposition and removal is performed at the same time in a single station. As examples, micro gears and a composite scaffold were fabricated using photo cured polymer with nano powders such as carbon black and hydroxyapatite. From the micro gear samples the hybrid RP technology showed higher precision than those made by casting or deposition process.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.4
• /
• pp.7-9
• /
• 2003

Viewing angle characteristics of a nematic liquid crystal (NLC) using a in-plane driven (IPD) vertical alignment (VA) cell without a negative compensation film on a homeotropic alignment layer were studied. Good voltage-transmittance (V - T) curves were obtained using the rubbing aligned IPD- VA cell. However, instability and low transmittances of V - T characteristics in photo aligned IPD- VA cell was measured. The EO performance of a rubbingaligned IPD- VA cell without a negative compensation film was wider than that of photoaligned IPD- VA cell and conventional VA cell. Also, the fabrication processes using the rubbing aligned IPD- VA cell mode be carried out with only one-sided rubbing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1060-1061
• /
• 2003

We report photo- (PL), and electroluminescence (EL) realized via intrachain and interchain energy transfer in poly[9,9-(2'-octyl)fluorene-2,7-vinylene]-co-poly[2-methoxy,5-(2'-ethyl-hexyloxy)-1,4-phenylenevinylene] (PFV-co-MEH-PPV) copolymer systems. Energy transfer begins even at the device using 5 % MEH-PPV copolymer, and shows the best device performance for the 10 % MEH-PPV copolymer.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.295-301
• /
• 1997

다양하고 방대한 양의 정보를 효과적으로 처리, 분배하는 멀티미디어 정보통신 시스템이 광신호에 의한 처리를 통해 구현되어갈 전망이다. 이를 위해 빛을 발생시키는 발광소자, 빛을 검출하는 소광소자, 광신호를 처리하는 광신호 처리소자 그리고 광신호를 전달해주는 광섬유 및 화상정보의 표시를 위한 표시소자 등이 중요한 요소기술이다. 이같은 소자의 제작에 있어 기존 물질로는 요구에 대한 대응이 어려워 보다 우수한 성능의 소재개발이 요구된다. 이에 대한 대체물질로 최근 유기물 또는 고분자가 각광을 받고 있으며, 이를 사용한 소자개발이 활발히 진행되고 있다. 이제까지 무기물로 달성하기 힘들었던 많은 기술들이 유기물로 쉽게 구현이 가능하게 되면 고성능의 소재 및 소자기술은 다가오느 정보화 시대를 더축 풍요롭게 하는데 크게 기여할 것이다.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.294-298
• /
• 2009

In this paper we proposed a new Bragg grating waveguide in order to improve reflectivity and to achieve compactness. Bragg gratings with various thicknesses were engraved in the middle of the core layer with a length of 3 mm. For the sake of cost-effectiveness, the $3^{rd}$ order Bragg grating waveguides were fabricated via conventional photolithography. The maximum reflectivities for the fixed width waveguide of $6{\mu}m$ with the 0.1 and $0.3{\mu}m$-thick Bragg gratings were, -13.14 and -6.25 dB, respectively, and the Bragg wavelengths were 1562.28, 1564.10 nm, respectively. A slight increase in the Bragg grating thickness can result in a remarkable reduction in the length of the Bragg grating waveguide with a fixed reflectivity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.286-289
• /
• 2012

In this paper, we have proposed piezoelectric energy harvester employing the pillar structure with the diameter size of 500 um. So we have selected the Su-8 photo-resist and modified lithography process to manufacture the pillar structure with height above the $500{\mu}m$. Simultaneously, we tried to make a comparative study to use ceramic bulk - polymer structure In this paper, we will report the process and properties of micro pillar structure based on the PMN-PZT ($Pb(Mg_{1/3}Nb_{2/3})O_3-PbZrTiO_3$) materials. Finally, We will propose a method for generating electrical energy with a piezoelectric element using vibration, an energy source can be obtained from the "clean" energy.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.127-133
• /
• 2006

Rapid prototyping technologies have been widely used to reduce the development cost of new products. Manufacturing industries are nowadays characterized by the flexibility and complexity of products. This to due to the rapid development of manufacturing technology and diverse needs of customers. In this paper, the best homing out and casting condition for getting casting product of resin pattern(photopolymer) have been examined experimentally. In generally, the burning out and casting conditions have effect on the casting products. Using the direct casting. we directly Producted the Jewelry. And in this paper, we used only gypsum. Many study of casting for resin have been used to dental investment. A dental investment is good for resin casting. but dental investment is too hard and not useful on the jewelry casting. Therefore we need to find the way of resin casting by gypsum.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.630-633
• /
• 2006

In heterojunction photovoltaic devices of $ITO/TiO_2/poly$(3-alkylthiophene)/Au, the photo current was characterized at different temperatures for different alkyl chain lengths and regioregularities: regiorandom, regioregular poly(3-hexylthiophene), and regioregular poly(3-dodecylthiophene). The regioregularity and alkyl chain length affected the photovoltaic characteristics due to differences in hole-carrier transportation. The drift charge mobilities of these devices were analyzed by the space-charge-limited current theory using the relation between the dark current and the bias voltage. The photocurrent in the devices based on poly(3-alkylthiophene)s decreased rapidly below the temperature at which the drift charge mobility was $10^{-5}\;cm^2/V{\cdot}s$.