• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.154-162
• /
• 2015

We have performed accelerated photo-degradation test using a 10-Sun level high irradiance $Weather-Ometer^{(R)}$ (10-Sun Ci5000) in an attempt to study acceleration and correlation between accelerated and service conditions for ink-jet ink. The accelerated test was used to predict lifetimes of ink-jet ink through the calculation of scaling factor for intensity of irradiance and duration of usage combined with estimation of lifetime distribution and inverse power model as a life-stress model. The lifetimes and acceleration factors for foreign and domestic inks were compared with each other. The results showed that the failure mechanisms and life-stress models for ink-jet ink were different among the color of ink which means that we might be in need of further study by color of inks.

• 한국세라믹학회지
• /
• 제54권5호
• /
• pp.388-394
• /
• 2017

Here, utilizing rhodamine B (RhB) as standard color dye, we examined the photo degradation proficiency of $Ag_2Se-Graphene-TiO_2$ nanocomposites under visible light irradiation; samples were prepared by ultrasonication techniques and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopic investigation and UV-Vis absorbance spectra examination. Our outcomes demonstrate that the $Ag_2Se-G-TiO_2$ nanocomposite showed significant photodegradation efficiency as compared with those of $TiO_2-G$ and $Ag_2Se-G$, with around 85.2% of Rhodamine B (RhB) degraded after 180 min. It is concluded that the $Ag_2Se-G-TiO_2$ nanocomposite is a competent candidate for dye pollutants.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.205-210
• /
• 2017

In this study, we examined the photo-degradation efficiency of $CoSe_2$-Graphene-$TiO_2$ ($CoSe_2-G-TiO_2$) nanocomposites under visible light irradiation using rhodamine B (RhB) as standard dye. $CoSe_2-G-TiO_2$ nanocomposites were synthesized by ultrasonication and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopic analysis and UV-Vis absorbance spectra analysis. Our results show that the $CoSe_2-G-TiO_2$ nanocomposite exhibited significant photo degradation efficiency compared to pure $TiO_2$ and $CoSe_2-G$, approximately 85.2% of the rhodamine (Rh B) degraded after 2.5 h. It is concluded that the $CoSe_2-G-TiO_2$ nanocomposite is a promising candidate for use in dye pollutants.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.268-276
• /
• 2009

In this study, activated carbon (AC) was treated with ferric ion by a sol-gel method. The compound (Fe-AC) was employed for the preparation of Fe-activated carbon/$TiO_2$, (Fe-AC/$TiO_2$) composites. The prepared Fe-AC/$TiO_2$ composites were characterized with surface properties, structural crystallinity, elemental identification and photocatalytic activity. The SEM results showed that ferric compounds and titanium dioxide were fixed onto the AC surfaces. The XRD results showed that Fe-AC/$TiO_2$ composites mostly contained anatase phase. EDX showed the presence of C, O, and Ti with Fe peaks in all samples. Its photocatalytic degradation effect was evaluated with the degradation behavior of the methylene blue (MB) solution. MB degradation could be attributed to the synergetic effects of adsorption, photo-degradation of $TiO_2$ and photo-Fenton of Fe component. The degradation rate for this photocatalysis was evaluated as a function of the concentration of the dye, the amount of $TiO_2$ and the pH. Photocataytic activity is good at activity pH.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권2호
• /
• pp.94-99
• /
• 1994

The purpose of this work is to investigate the interface characteristics of hydrogenated amorphous silicon thin films prepared by PECVD and photo-induced CVD and to examine the annealing effects of ultraviolet irradiation on hydrogenated amorphous silicon thin films which were degraded by visible light illumination. The interface layer thickness of films deposited by photo-induced CVD was about 600-900.angs. while that by PECVD was about 1000-1300.angs.. These results can show that the quality of interface layer in photo induced CVD film is better than that in PECVD sample. The electrical properties are improved by ultraviolet irradiation on visible light soaked a-Si:H films using photo-CVD light sources, probably due to the fact that UV generates phonons in a-Si:H films and anneal the meta stable defects.

• 폴리머
• /
• 제31권4호
• /
• pp.278-282
• /
• 2007

컴퓨터 하드디스크 윤활제로 사용되고 있는 perfluoropolyether(PFPE)의 다양한 분해 거동을 살펴보았다. PFPE의 열분해는 $170\;^{\circ}C$에서 시작하여 $450\;^{\circ}C$에서 완전 분해가 일어나며 마모된 하드디스크 슬라이드의 재질인 $Al_2O_3{\cdot}TiC$가 윤활제와 접촉하는 경우, Lewis acid 촉매분해에 의하여 주사슬의 methylene oxide(fluoride)의 절단에 의한 급격한 분해반응과 methylene(fluoride)와 hydroxy 말단기의 열분해로 인하여 $300\;^{\circ}C$에서 분해가 완료됨을 확인하였다. PFPE에 UV가 조사되면 광 분해 영향으로 Lewis acid 촉매분해와는 달리 methylene oxide (fluoride)의 절단 보다는 methylene(fluoride)와 말단기의 절단이 더 촉진되며 이때 생성된 라디칼의 2차 반응에 의한 chain extension에 의하여 PFPE의 분자량이 증가됨을 확인하였다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.290-298
• /
• 2009

본 논문에서 Fe-활성탄소 섬유(ACF)/$TiO_2$ 복합체 광촉매를 졸-겔 방법에 의하여 제조하였다. 합성된 광촉매는 UV조사하에서 MB용액의 광분해에 사용되었다. BET 데이터는 Fe와 Ti의 여러 가지 농도를 가지고 처리된 ACF의 표면에서 흡착 특성을 보여준다. SEM 사진에서 보여지는 것처럼, 철 혼합물과 $TiO_2$는 ACF 표면에 활착되어 있음을 나타내었다. X선 분말 회절법으로부터 얻어진 결과는 복합체로부터 FeO+$TiO_2$, Anatase 및 Rutile 구조의 결정상을 나타내었다. 원소분석을 위한 EDX spectra는 Fe와 함께 C, O, Ti의 peak들이 존재함을 나타내었다. MB 분해에 대한 활성은 $TiO_2$의 광분해와 Fe의 photo-Fenton 효과로 인해 전자/hole쌍 반응으로부터 파생된 -OH 라디칼들에 의한 것으로 여겨진다.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.429-437
• /
• 2006

화학세정폐수에 함유되어 있는 citric acid의 효율적인 처리방안을 수립하기 위해 $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton 산화방법을 이용하여 각각 citric acid의 제거효율 및 그에 따른 전력소비량을 평가하였다. 그 결과 조사된 최적 처리조건에서 $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton 산화방법을 이용한 citric acid 농도에 근거한 TOC 제거효율은 각각 95.5%, 92.3%, 91.5%로 조사되었으며, 그에 따른 전력소비량은 $11.26kWh/m^3,\;3.85kWh/m^3,\;0.799kWh/m^3$으로 조사되었다. 이 결과에 의하면 세가지 광화학적 산화방법 모두 유기물질이 90% 이상 제거되어 citric acid의 분해에 효과적인 것으로 판단되었다. 그러나 Photo-Fenton 산화방법이 다른 방법에 비해 처리에 소요되는 반응시간이 짧은 것으로 나타났다. 또한 광화학적 산화방법의 운영비를 결정짓는데 중요한 요소인 전력소모량 측면에서도 Photo-Fenton 산화방법이 다른 방법에 비해 우수한 것으로 조사되어 본 연구에서 비교하는 세가지 방법 중 citric acid 처리에는 Photo-Fenton 방법이 효율적인면과 경제성면에서 가장 적합한 처리기술로 결론지을 수 있었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.252-252
• /
• 2006

Utilizing the existence of the induction period in photo-polymerization, we propose a new injection method of photo-polymerizable, thermocrosslinking hydrogels made of di-acrylated Pluronic F127 (DA-PF127). This method can solve the problem of fast dissolution of thermal gelation as a scaffold and the disadvantages of the existing injection method that photo-polymerize di-acrylated Pluronic polymer after injection using optical fiber. Injectable gelation of DA-PF127 by the proposed method was demonstrated both in vitro and in vivo. The enhanced stability by this novel photo-polymerization strategy was confirmed by the more sustained release of loaded protein as well as the prolonged degradation time of the hydrogels.

• Carbon letters
• /
• 제18권
• /
• pp.30-36
• /
• 2016

Well-dispersed Ag₃VO₄ nanoparticles @polyacrylonitrile (PAN) nanofibers were synthesized by an easily controlled, template-free method as a photo-catalyst for the degradation of methylene blue. Their structural, optical, and photocatalytic properties have been studied by X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy equipped with rapid energy dispersive analysis of X-ray, photoluminescence, and ultraviolet-visible spectroscopy. The characterization procedures revealed that the obtained material is PAN nanofibers decorated by Ag₃VO₄ nanoparticles. Photocatalytic degradation of methylene blue investigated in an aqueous solution under irradiation showed 99% degradation of the dye within 75 min. Finally, the antibacterial performance of Ag₃VO₄ nanoparticles @PAN composite nanofibers was experimentally verified by the destruction of Escherichia coli. These results suggest that the developed inexpensive and functional nanomaterials can serve as a non-precious catalyst for environmental applications.