• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.32-37
• /
• 2008

Freestanding hydride vapor phase epitaxy grown GaN(Gallium Nitride) substrates subjected to various polishing methods were characterized for their surface and subsurface conditions, Although CMP(Chemical Mechanical Polishing) is one of the best approaches for reducing scratches and subsurface damages, the removal rate of Ga-polar surface in CMP is insignificant($0.1{\sim}0.3{\mu}m$/hr) as compared with that of N-polar surface, Therefore, conventional MP(Mechanical Polishing) is commonly used in the GaN substrate fabrication process, MP of (0001) surface of GaN has been demonstrated using diamond slurries with different abrasive sizes, Diamond abrasives of size ranging from 30nm to 100nm were dispersed in ethylene glycol solutions and mineral oil solutions, respectively. Significant change in the surface roughness ($R_a$ 0.15nm) and scratch-free surface were obtained by diamond slurry of 30nm in mean abrasive size dispersed in mineral oil solutions. However, MP process introduced subsurface damages confirmed by TEM (Transmission Electronic Microscope) and PL(Photo-Luminescence) analysis.

• Journal of the Korean Society of Visualization
• /
• v.12 no.3
• /
• pp.9-14
• /
• 2014

Two-photon microscopy (TPM) has been used in plant research as a high-resolution high-depth 3D imaging modality. However, TPM is known to induce photo-damage to the plant in case of long time exposure, and optimal excitation wavelength for plant imaging has not been investigated. Longer excitation wavelength may be appropriate for in vivo two-photon imaging of Arabidopsis thaliana leaves, and effects of longer excitation wavelength were investigated in terms of imaging depth, emission spectrum. Changes of emission spectrum as a function of exposure time at longer excitation wavelength were measured for in vivo longitudinal imaging. Imaging depth was not changed much probably because photon scattering at the cell wall was a limiting factor. Chloroplast emission spectrum showed its intensity peak shift by 20 nm with transition of excitation wavelength from 849 nm or below to 850 nm or higher. Emission spectrum showed different change patterns with excitation wavelengths in longitudinal imaging. Longer excitation wavelengths appeared to interact with chloroplasts differently in comparison with 780 nm excitation wavelength, and may be good for in vivo imaging.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.201-208
• /
• 2012

Purpose: This study was conducted to develop a vegetable transplanting robot which transplants seedlings from a nursery tray to a plant pot using its four fingers. Method: The robot consists of the transplanting part, nursery tray moving part, plant pot moving part, main frame and controller. Two moving parts are controlled by the photo sensor and servo motor. The transplanting part was composed with two components; transporting device using E-MY2H(SMC Corp., Japan) for controlling finger position accurately and finger for transplanting the seedling. Results: Head lettuce using the transplanting robot was transplanted in 21 days after sowing based upon the seed shape measurement and removing examination. The optimal finger shape was thin pin type because it caused minimum damage to the roots of seedlings. Conclusions: The four inclined pin type was applied to remove the seedlings from the nursery tray. In addition, the transplanting capacity of the developed robot was 2800 pots per hour and the rate of success was 99% and above.

• Journal of Ecology and Environment
• /
• v.31 no.4
• /
• pp.317-325
• /
• 2008

P. glehnii, an evergreen conifer found in northern areas, is known as a cold-resistant species. In this experiment, we measured the water content, PSⅡ efficiency, chlorophyll fluorescence, pigments of the xanthophyll-cycle and activity of enzymes of the ascorbate-glutathione cycle during cold acclimation and at subsequent low-temperature conditions to examine the importance of acclimation to cold tolerance. P. glehnii showed a decrease in PSⅡ efficiency (especially in Fv) during cold acclimation and at subsequent low temperatures. However, cold-acclimated needles showed higher PSⅡ efficiency at low temperatures than nonacclimated needles. In addition, 0-YON (first-year needles) showed an increase in $\beta$-carotene and lutein, while 1-YON (one-year-old needles) immediately developed an antioxidant mechanism in the ascorbate-gluthathione cycle as soon as they were exposed to low temperature and both 0-YON and 1-YON showed increased zeaxanthin and de-epoxidation ratios at continuous low temperature. Based on our results, we suggest that P. glehnii maintain PSⅡ efficiency at low temperature by effectively protecting the photosynthetic apparatus from photo-damage by rapid induction of an antioxidant mechanism in 1-YON and dissipation of excess energy by $\beta$-carotene and lutein in 0-YON.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.317-321
• /
• 2008

Piping in the Nuclear Power plants (NPP) are mostly consisted of carbon steel pipe. The wall thinning defect is mainly occurred by the affect of the flow accelerated corrosion (FAC) of fluid which flows in carbon steel pipes. This type of defect becomes the cause of damage or destruction of piping. Therefore, it is very important to measure defect which is existed not only on the welding partbut also on the whole field of pipe. Over the years, Infrared thermography (IRT) has been used as a non destructive testing methods of the various kinds of materials. This technique has many merits and applied to the industrial field but has limitation to the materials. Therefore, this method was combined with lock-in technique. So IRT detection resolution has been progressively improved using lock-in technique. In this paper, the quantitative analysis results of the location and the size of wall thinning defect that is artificially processed inside the carbon steel pipe by using IRT are obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.119-120
• /
• 2007

반도체 공정에서 사용되는 ILD막질 중 oxy-nitrde(SiON) film은 contact etch stopper, photo공정을 위한 ARL(anti-reflection lay떠 그리고, 후속공정의 plasma damage에 대한 blocking layer로서의 역할을 담당하며 많은 공정에 널리 사용되고 있다. 그러나 막질 자체의 불완전성 (trap site, dangling bond)에 의해 cell current instability(CCI) 특성을 악화 시킬 수 있어 이에 대한 원인규명 및 대책이 요구되었다. 본 연구는 미국 S사(社) super flash memory에서 oxy-nitride 막질 증착 시의 gas flow량에 따른 CCI 특성변화를 연구하고 최적의 공정조건을 제시하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.251.2-251.2
• /
• 2013

Natural photosynthesis utilizes two proteins, photosystem I and photosystem II, to efficiently oxidize water and reduce NADP+ to NADPH. Artificial photosynthesis which mimics this process achieve water splitting through a two-step Z-schematic water splitting process using man-made synthetic materials for hydrogen fuel production. In this study, Z-scheme system was achieved from the hybrid materials which composed of hydrogen production part as photosystem I protein and water oxidizing part as semiconductor BiVO4. Utilizing photosystem I as the hydrogen evolving part overcomes the problems of existing hydrogen evolving p-type semiconductors such as water instability, expensive cost, few available choices and poor red light (>600 nm) absorbance. Some problems of photosystem II, oxygen evolving part of natural photosynthesis, such as demanding isolation process and D1 photo-damage can also be solved by utilizing BiVO4 as the oxygen evolving part. Preceding research has not suggested any protein-inorganic-hybrid Z-scheme composed of both materials from natural photosynthesis and artificial photosynthesis. In this study, to realize this Z-schematic electron transfer, diffusion step of electron carrier, which usually degrades natural photosynthesis efficiency, was eliminated. Instead, BiVO4 and Pt-photosystem I were all linked together by the mediator gold. Synthesized all-solid-state hybrid materials show enhanced hydrogen evolution ability directly from water when illuminated with visible light.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.275-280
• /
• 2005

We propose a new approach to greatly simplify the fabrication of conventional nanoimprint lithography (NIL) by combined nanoimprint and photolithography (CNP). We introduce a hybrid mask mold (HMM) made from UV transparent material with a UV-blocking Cr metal layer placed on top of the mold protrusions. We used a negative tone photo resist (PR) with higher selectivity to substrate the CNP process instead of the UV curable monomer and thermal plastic polymer that has been commonly used in NIL. Self-assembled monolayer (SAM) on HMM plays a reliable role for pattern transfer when the HMM is separated from the transfer layer. Hydrophilic $SiO_2$ thin film was deposited on all parts of the HMM, which improved the formation of SAM. This $SiO_2$ film made a sub-10nm formation without any pattern damage. In the CNP technique with HMM, the 'residual layer' of the PR was chemically removed by the conventional developing process. Thus, it was possible to simplify the process by eliminating the dry etching process, which was essential in the conventional NIL method.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.1
• /
• pp.109-116
• /
• 2015

Objective : Solar ultraviolet (UV) light can cause photoaging of human skin. Many researchers have focused on effective prevention to mitigate the aging process. This study was aimed to investigate anti-wrinkle effects of pomegranate concentration solution (PCS) using photoaged hairless mouse model. Method : To clarify the protective effect of PCS against UVB-induced photo-damage, water capacity was measured with transepidermal water loss (TEWL) in SKH-1 hairless mice. In addition, image of skin replicas was analyzed. Results : Our results showed that the PCS treatment protects skin against UVB-induced photoaging, based on the parameters including moisture capacity and TEWL. According to visual assessment of skin replica, application of 1 ml/kg PCS inhibited UV-induced wrinkle formation in mice skin as compared to the vehicle-applied control mice. Conclusion : Taken together, these results indicated that PCS could improve skin wrinkle formation induced by UVB irradiation in SHK-1 hairless mice. PCS could be applied as an anti-wrinkle agent.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.262-268
• /
• 2009

Purpose: Recently medical dispute about plastic surgery is increasing rapidly as result of growing surgery itself due to high interest in appearance and advertisement of plastic surgery. So we want to find a way to prevent similar medical accident by making better solution of plastic surgery through case analysis of medical dispute. Method: 161 cases about plastic surgery asked for aid at Korea Consumer Agency and 41 cases judged at the court was surveyed and gender, location and kind of hospital, goal and kind of operation, making operation agreement or not, kind of damage, result of process, result of lawsuit was studied from 2004.1.1. to 2006.12.31. Result: Medical doctor have to explain about symptoms of disease, method of treatment, possibility of complication, prognosis to patients before therapy so they can make decision if they take operation by doctor or not. On this survey, among the patients who underwent re - operation or had complication, 88.1%(96 from 109 cases) of them didn't get enough explanation about possibility of complication before surgery They brought lawsuit insisting they would not undergo operation if they got enough explanation about possibility of complication and result of operation before surgery. Conclusion: It is advisable that doctor must observe the duty of explanation before surgery and respect the right to decide of patient, make operation agreement and put down concrete progress note and store the pre and post operative photo to avoid medical accident. It is also needed to have guideline of therapy, Code of ethics, organization which deals with medical dispute, reconsideration of law to control that.