• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.242-246
• /
• 2002

인체의 손가락 끝에서 발생하는 맥의 파형과 온도, 피부저항을 측정할 수 있는 복합센서를 설계 제작하였다. 인체신호를 계측하는 여러 가지 방법 중에서 손가락 끝의 맥 파형을 계측하고자 광센서를 활용하여 계측시스템을 구현하였고 특성을 평가하였다. 그 결과 체온측정은 대략 $0.01^{\circ}C$의 분해능을 구현 할 수 있었고, 피부저항 측정은 최대 $5M{\Omega}$까지 측정 가능하고 최소분동은 $5k{\Omega}$ 정도이며, 맥박측정은 새롭게 포토센서를 적용하여 미소진동을 측정할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.319-320
• /
• 2006

In this paper, automatic sunvisor system is introduced for driver's safety and convenience. This system has the mechanism which keeps the sun off without obstruction of driver's sight. The mechanism can make the sunvisor move forward or rotate left while remaining inside inner roof. The control system consists of a CPU, a motor driver, light sensors, and the algorithm that can control the movement of sunvisor efficiently. When the light sensors take the sun light, they give the signal to the CPU and the CPU calculates the best position of the sunvisor with the information of driver's eyes height. Then, the CPU gives the signal to motors that can move the sunvisor.

• 반도체디스플레이기술학회지
• /
• 제17권2호
• /
• pp.36-40
• /
• 2018

Point LED applied in Korea is applied to communication RCLED, but it is designed to be suitable for communication, so it does not meet requirements in fiber coupling rate and optical output. - Currently, domestic optical pipe manufacturers use general LEDs for light emitting devices, but Japanese products use high power point LEDs to develop superior point LED (RED 620 ~ 660nm).

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.231-236
• /
• 2007

In this paper, we studied the possibility of non-contact bill counting method using optical fiber sensor instead of traditionally used friction counting method. To implement non-contact counting, we designed and made optical fiber sensor and related parts. optical fiber sensor is made of optical fiber of 1mm diameter, photo diode and laser diode. Based on the conclusion which derived from preliminary experiment, instrument part is designed to make unevenness on the surface of bill paper and to stay parallel with optical fiber section. By analyzing the signal of optical sensor, we made counting program. Experimental instrument is composed of sensor part, instrument part, signal handling part. We checked the possibility of non-contact counting method after implementing experiment by using optical fiber sensor and instrument part.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1999년도 동계 학술대회 논문집
• /
• pp.321-326
• /
• 1999

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.347-359
• /
• 2010

Ortho-photos provide valuable spatial and spectral information for various Geographic Information System (GIS) and mapping applications. The absence of relief displacement and the uniform scale in ortho-photos enable interested users to measure distances, compute areas, derive geographic locations, and quantify changes. Differential rectification has traditionally been used for ortho-photo generation. However, differential rectification produces serious problems (in the form of ghost images) when dealing with large scale imagery over urban areas. To avoid these artifacts, true ortho-photo generation techniques have been devised to remove ghost images through visibility analysis and occlusion detection. So far, the Z-buffer method has been one of the most popular methods for true ortho-photo generation. However, it is quite sensitive to the relationship between the cell size of the Digital Surface Model (DSM) and the Ground Sampling Distance (GSD) of the imaging sensor. Another critical issue of true ortho-photo generation using high resolution satellite imagery is the scan line search. In other words, the perspective center corresponding to each ground point should be identified since we are dealing with a line camera. This paper introduces alternative methodology for true ortho-photo generation that circumvents the drawbacks of the Z-buffer technique and the existing scan line search methods. The experiments using real data are carried out while comparing the performance of the proposed and the existing methods through qualitative and quantitative evaluations and computational efficiency. The experimental analysis proved that the proposed method provided the best success ratio of the occlusion detection and had reasonable processing time compared to all other true ortho-photo generation methods tested in this paper.

• 센서학회지
• /
• 제11권6호
• /
• pp.365-370
• /
• 2002

교류 220V에 의해 동작하는 점핑링 장치를 제작하고 광센서를 사용하여 링의 높이정보를 받아 부상한 링의 높이를 실시간으로 검출하고 교육적 효과를 높이기 위해 디지털 높이정보를 아날로그 변환하여 쉽게 높이를 알 수 있도록 하였다. 교육용 시스템을 직접 제작하여 시스템을 모형화하여 제어신호를 구하고 제어 프로그램에 의해 원하는 높이로 링을 부상할 수 있도록 하였다. 본 논문은 광센서를 사용하여 링의 위치를 실시간으로 검출하였고 광센서의 배열과 높이 정보를 발광다이오드 5개로 디지털 값을 보여주었고, D/A변환하여 교육용 시스템을 제작하여 A/D 변환기를 통해 데이터 신호처리 하였다. 교육용 시스템을 모형 화하여 원하는 링의 높이를 실시간으로 제어 할 수 있게 하였다.

• 조명전기설비학회논문지
• /
• 제24권2호
• /
• pp.86-91
• /
• 2010

광섬유 격자를 이용한 센서 네트워크를 이용하여 준분배형 전력설비 안전진단 시스템을 구성하였다. FBG를 이용한 센서는 한 개의 라인에 복수의 센서가 설치가능하며, 전자기 노이즈에 영향을 받지 않는 특성을 가진다. 광섬유 격자에서 반사되는 파장의 신호를 분석하기 위하여 InGaAs PD 어레이와 홀로그램 회절격자를 이용하여 구조가 간단하면서도 고속의 파장복조가 가능하도록 하였다. 제안한 시스템의 정확도를 개선하기 위해 가우시안 라인피팅을 적용하였고, 높은 파장 정밀도(4[pm])와 동작 안정성을 얻을 수 있음을 확인하였다.

• 센서학회지
• /
• 제13권2호
• /
• pp.85-89
• /
• 2004

This paper represents the development of high sensitivity photo-sensor for the fluorescence detection in the integrated biological analysis system. The finger-type PIN photodiodes were fabricated as the photo-sensor, and had a high sensitivity ($I_{light}/I_{dark}$ = 8720). The interference filter consisted of $TiO_{2}$ and $SiO_{2}$ was directly deposited on the photodiodes. Deposited filter with 95.5% reflection under 532 nm and 98% transmission over 580 nm exceedingly decreased the magnitude of background signal in the detection. The PDMS micro-fluidic channels are bonded on the photodiode by $O_{2}$ plasma treatment. The detection current was proportional to two primary parameters (light intensity, concentration), and the on-chip detection system could detect fluorescence signals down to 100 nM concentration (LOD = Limit of detection of rhodamine).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.314-320
• /
• 2014

Field balancing is required in any kind of phase information for the determination location balancing mass toward a rotor unbalance mass. Phase or phase angle is a measurement of the relationship of how one vibration signal which relates to another vibration signal and is commonly used to calculate the placement of balance weight. In this paper, A right guideline shows the photo optical speed sensor as the external keyphasor is a very useful when diagnosing machinery vibration problems on considering a phase lag comparing to the laser optical speed sensor. Some experimental results generate the interesting phase errors when appling to a wrong conditions. So, Usage of photo optical speed sensor which is used primarily to measure the shaft rotating speed serves as a reference for measuring vibration phase information has effect on the placement of phase angle how it was misunderstood. This paper will help a right method to search for the position of balancing weight and serves as baseline for further measurements using low cost and much easier user convenience. It is concluded that the propose baseline is likely to be applicable to apply to the practical field balancing weight.