• Archives of Pharmacal Research
• /
• v.18 no.2
• /
• pp.69-74
• /
• 1995

In order to improve physico-chemical properties and to enhance stability of drugs, amino acid salt has been widely adoptd in pharmaceutical synthesis. Acetylsalicylic acid lysinate is one of the widely used analgesics and it is a good example of t5his synthesis. In the case of bacetylsalicylic acid lysinate synthesis, racemization of natrually occurred lysine is esential because the racemic lysine salt of the drug shows better yield, crystallinity and dryness than that of the L-lysine salt. To esatablish a simple, practical and economical process for L-lysine racemization, L-lysine treatments with phosphoric acid and with acetic acid were compared and the optimum conditions for its process and derivatization were investigated by chiral separation methods using GC_MS spectroscopy.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.248-255
• /
• 2013

PURPOSE. This study compared the effect of three intraoral repair systems on the bond strength between composite resin and zirconia core. MATERIALS AND METHODS. Thirty zirconia specimens were divided into three groups according to the repair method: Group I-CoJet$^{TM}$ Repair System (3M ESPE) [chairside silica coating with $30{\mu}m$ $SiO_2$ + silanization + adhesive]; Group II-Ceramic Repair System (Ivoclar Vivadent) [etching with 37% phosphoric acid + Zirconia primer + adhesive]; Group III-Signum Zirconia Bond (Heraus) [Signum Zirconia Bond I + Signum Zirconia Bond II]. Composite resin was polymerized on each conditioned specimen. The shear bond strength was tested using a universal testing machine, and fracture sites were examined with FE-SEM. Surface morphology and wettability after surface treatments were examined additionally. The data of bond strengths were statistically analyzed with one-way ANOVA and Tamhane post hoc test (${\alpha}$=.05). RESULTS. Increased surface roughness and the highest wettability value were observed in the CoJet sand treated specimens. The specimens treated with 37% phosphoric acid and Signum Zirconia Bond I did not show any improvement of surface irregularity, and the lowest wettability value were found in 37% phosphoric acid treated specimens. There was no significant difference in the bond strengths between Group I ($7.80{\pm}0.76$ MPa) and III ($8.98{\pm}1.39$ MPa). Group II ($3.21{\pm}0.78$ MPa) showed a significant difference from other groups (P<.05). CONCLUSION. The use of Intraoral silica coating system and the application of Signum Zirconia Bond are effective for increasing the bond strength of composite resin to zirconia.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.15-21
• /
• 2006

Composite materials were prepared by impregnating water glass into the wood, followed by soaking in solutions of boric acid or phosphoric acid. The effects of these treatments on the physical and mechanical properties of the specimens and especially on its heat resistance were investigated. 1) Weight Percent Gain (WPG)s increased with increase of concentrations of water glass. However, there was little relationship between treatment temperatures and WPG. Generally, WPGs of double treated specimens were higher than single treated ones. 2) Percent shrinkages in each directions of the specimens treated with water glass had higher value than other specimens. Percent shrinkages of the specimens treated with boric acid or phosphoric acid were decreased as compared with untreated specimen. However, the specimens treated with water glass or phosphoric acid showed very high hygroscopicity. 3) The bending strengths of all specimens treated inorganic substances were slightly decreased. However, the values of compressive strength and hardness of most specimens treated with inorganic substances increased or similar to that of untreated specimen except for a phosphoric acid treated specimens. 4) The specimens had good heat resistance. Weight losses of all specimens treated inorganic substances were about 50~70%. In particular, the specimens treated at $300^{\circ}C$ and $400^{\circ}C$ almost kept their shapes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.370-373
• /
• 2003

A search for a new phosphor composition of excellent performance in systematic ways requires lots of research efforts, and often turns out to be very timeconsuming and difficult. Thus, usually practical ways are taken to improve the performance of phosphors. A few examples of practical surface treatments on phosphors such as $In_2O_3$ coating on $ZnGa_2O_4:Mn$, phosphoric acid treatment on ZnS:Ag,Cl, and base KOH treatment with ultrasonication on ZnS:Ag,Cl are presented. The reasons for the improvement of luminescence intensity or degradation properties after these treatments are discussed based upon careful analyses on the surface of the phosphors and a proposed model on charge carriers generated by electron beam excitation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.5
• /
• pp.661-667
• /
• 2013

The objective of this study was to investigate the effects of partial replacement of wheat hay with sun-dried (SOC) or acid-treated SOC (ASOC) olive cake on nutrient intake and performance of Awassi lambs. An additional objective was to study the effects of acid treatment of olive cake (OC) on its chemical composition and nutritive value. On DM basis, sun-drying of OC did not dramatically affect its chemical composition. On the other hand, treating SOC with phosphoric acid decreased (p<0.05) SOC contents of neutral detergent fiber. Twenty seven male lambs ($17.6{\pm}0.75$ kg body weight) individually housed in shaded pens were randomly assigned to one of three dietary treatments (9 lambs/treatment). Dietary treatments were formulated to be isocaloric and isonitrogenous by replacing 50% of wheat hay in the control diet (CTL) with SOC or ASOC and to meet all nutrient requirements. Dietary treatments had no effects on nutrient intake or digestibility except for ether extract. Lambs fed the SOC diet had (p = 0.05) faster growth rate, greater final body weight, and greater total body weight gain in comparison with the CTL diet, but not different from the ASOC diet. Additionally, lambs fed the SOC diet had greater (p = 0.03) hot and cold carcass weights than the ASOC diet, but not different from the CTL diet. However, feed conversion ratios and dressing percentages were similar among dietary treatments. In conclusion, replacing half of dietary wheat hay with SOC improved performance of Awassi lambs with no detrimental effects on nutrients intake or digestibility. No further improvements in the nutritive value of SOC and lambs performance were detected when SOC was treated with acid.

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.235-240
• /
• 2018

Superlubricity refers to the lubrication phenomenon that occurs when the friction coefficient is lower than 0.01. In recent years, this phenomenon has received a significant amount of attention because it can greatly contribute to the reduction of economic and environmental losses caused by friction and wear. In the case of acid lubricants, only ceramic materials can be used for superlubricity, and it takes a long running-in period to enter the superlubricity regime. In this work, we investigated the superlubricity effect of vitreous enamel coating on SUS304. We also examined the running-in period of vitreous enamel coating under phosphoric acid lubricant condition with respect to surface treatments. Drying and polishing methods were used to treat the vitreous enamel coating on the specimen. The friction experimental results revealed that superlubricity could be achieved with vitreous enamel coating. It was also found that the drying and polishing methods can significantly reduce the running-in period and improve the wear properties of vitreous enamel coating. In particular, the polishing method shortened the running-in period by approximately 99% and reduced the wear rate by approximately 99%, compared to nontreated vitreous enamel coating.

• Journal of Periodontal and Implant Science
• /
• v.52 no.1
• /
• pp.54-64
• /
• 2022

Purpose: This in vitro study was conducted to evaluate the effects of different debridement techniques and conditioning procedures on root surface morphology and blood clot stabilization. Methods: Two debridement techniques (curette [CU] vs. high-speed ultrasound [US]) and 2 conditioning procedures (ethylenediaminetetraacetic acid [EDTA] and phosphoric acid [PA]) were used for the study. Seven experimental groups were tested on root surfaces: 1) no treatment (C); 2) CU; 3) US; 4) CU+EDTA; 5) US+EDTA; 6) CU+PA; and 7) US+PA. Three specimens per group were observed under scanning electron microscopy (SEM) for surface characterization. Additional root slices received a blood drop, and clot formation was graded according to the blood element adhesion index by a single operator. Data were statistically analyzed, using a threshold of P<0.05 for statistical significance. Results: The C group displayed the most irregular surface among the tested groups with the complete absence of blood traces. The highest frequency of blood component adhesion was shown in the CU+EDTA group (P<0.05), while no differences were detected between the CU, US+EDTA, and CU+PA groups (P<0.05), which performed better than the US and US+PA groups (P<0.05). Conclusions: In this SEM analysis, EDTA and conventional manual scaling were the most efficient procedures for enhancing smear layer removal, collagen fiber exposure, and clot stabilization on the root surface. This technique is imperative in periodontal healing and regenerative procedures.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.2
• /
• pp.267-274
• /
• 2009

Two experiments were conducted to investigate the feeding value of wood vinegar in weanling pigs. In Experiment 1, weanling pigs (n = 224; Landrace ${\times}$Yorkshire ${\times}$Duroc, 21${\pm}$3 d-old, initial BW 6.12${\pm}$0.10 kg) were assigned to four dietary treatments. Different levels of wood vinegar were added to the diets as dietary treatments (0, 0.1, 0.2 and 0.3%). Each treatment comprised 4 replicates with 14 piglets in each. Experimental feeding was conducted for 28 d in two phases (phase I, d 0 to 14 and phase II, d 15 to 28). Feeding of wood vinegar linearly (p<0.05) improved the phase I, phase II and overall ADG and increased (linear, p<0.05) the overall and phase II ADFI. Linear improvements in the apparent fecal digestibility of dry matter (p = 0.013), gross energy (p = 0.019) and crude protein (p = 0.033) were observed as the level of wood vinegar was increased in the diet of pigs. Experiment 2 was conducted to compare dietary wood vinegar with commonly used growth promoters, organic acid (mixture of 21% phosphoric acid, 3.25% propionic acid, 2.8% formic acid, 10% calcium formate and 5% calcium propionate) and antibiotic (aparamycin). A total of 288 weanling piglets (Landrace ${\times}$Yorkshire ${\times}$Duroc, 22${\pm}$2 d-old, initial BW 6.62${\pm}$0.31 kg) were assigned to four treatments with four replicates (18 piglets/pen) for 28 days and fed in 2 phases: phase I, d 0 to 14 and phase II, d 15 to 28. The dietary treatments were control (corn-soybean meal basal diet without antibiotics) and diets containing 0.2% antibiotic, 0.2% organic acid and 0.2% wood vinegar. Pigs fed antibiotic showed higher (p<0.001) ADG and better feed efficiency followed by pigs fed wood vinegar and organic acid diets while those fed the control diet had lowest ADG and poorest feed efficiency. The overall and phase I ADFI was highest (p<0.001) in pigs fed wood vinegar and lowest in pigs fed the control diet. Apparent fecal digestibility of dry matter, gross energy and crude protein was significantly higher (p<0.05) in pigs fed the antibiotic diet when compared with pigs fed the control but comparable among pigs fed antibiotic, organic acid and wood vinegar diets. Higher populations of Lactobacillus (p = 0.004) were noted in the ileum of pigs fed the wood vinegar diet, while the population of coliforms in the ileum and cecum was higher (p<0.001) in pigs fed the control diet when compared with pigs fed antibiotic, organic acid or wood vinegar diets. These results indicated that wood vinegar could improve the performance of weanling pigs by improving the nutrient digestibility and reducing harmful intestinal coliforms; moreover performance of pigs fed wood vinegar was superior to those fed organic acid.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.692-699
• /
• 2008

The purpose of this study was to evaluate the effect of surface treatment on the shear bond strength between new and old composite resin. The prepared resin specimens were separated 6 groups, and each group then received a different surface treatment. Then the repair material was added. Shear bond strengths for repair were measured after 7 days and the results were analyzed by using one way ANOVA. The results were as follows; 1. Group 3, 4(air abrasion) showed significantly higher shear bond strength than Group 1(phosphoric acid)(p<0.05). Group 5, 6(diamond bur) showed higher bond strength than Group 1(phosphoric acid) but not significantly different( p>0.05). 2. Group 2(self-etching adhesive) showed lower shear bond strength than Group 1(phosphoric acid) but not significantly different(p>0.05). 3. There was no statistically significant difference between Group 3(air abrasion) and Group 4(air abrasion+etching). 4. There was no statistically significant difference between Group 5(diamond bur) and Group 6(diamond bur+etching). In conclusion, the surface treatment with air abrasion resulted in higher repair bond strength than other methods. Repair bond strength was not significantly affected by acid etching.